Professional Documents
Culture Documents
MAKE/MODEL: BMW 3.2L (N47-177hp) OIL TYPE & GRADE: Castrol Edge 0W/30
UNIT
TOPALDIS: Universal averages show typical wear for this type of diesel after 9,700 kilometers of oil use.
COMMENTS
This 0W/30 oil was in use 28,336 km and most wear metals and silicon were high. The high wear is from
new parts breaking-in plus the very long oil change. Silicon is from sand-casted parts plus lubes/sealers
used at the factory. Soot levels were high due to the long oil run. The oil's TBN was 1.9, showing very little
active additive left in the oil. This much metal makes the oil too abrasive for use. Suggest a 15,000 km oil
run & check back. Lots of this stuff will wash out.
ALUMINUM 18 18 7
CHROMIUM 6 6 1
IRON 190 190 48
COPPER 45 45 16
LEAD 2 2 2
TIN 1 1 1
MOLYBDENUM 122 122 79
NICKEL 3 3 1
MANGANESE 42 42 10
SILVER 0 0 0
TITANIUM 0 0 0
POTASSIUM 12 12 4
BORON 37 37 11
SILICON 14 14 8
SODIUM 8 8 6
CALCIUM 1514 1514 1743
MAGNESIUM 23 23 17
PHOSPHORUS 693 693 699
ZINC 805 805 841
BARIUM 0 0 0
Values
Should Be*
SUS Viscosity @ 210°F 60.0 60-69
cSt Viscosity @ 100°C 10.21 10.2-13.0
Flashpoint in °F 420 >410
PROPERTIES