Professional Documents
Culture Documents
Since 1977
Used by all leading Transformer Manufacturers, Utilities and various industries for over 39 years.
NEW
Features:
l Single sensor to measure Oil temperature and Winding temperature.
l Simple user friendly front panel configuration
l Input : Pt 100 RTD, 3 Wire
l 2 SPDT relay contact outputs for Oil temperature & 2 or 4 SPDT relay contact
outputs for winding temperature with User selectable settings
l The CT secondary current, temperature gradient and thermal time constant
settings are all user configurable
l Two 4 – 20mA dc Analog output for Remote indication (Optional)
l RS 485 Digital communications port (Optional)
l A GREEN LED Indicates that Instrument in program mode.
l A YELLOW LED indicates the Maximum Temperature of OTI & WTI separately.
l A RED LED indicates that the ALARM, TRIP FAN1 or FAN2 is ON respectively.
l If a RTD goes open circuit, it is detected, the displays “OPEN”.
l Universal Power Supply 90-260V AC/DC
l Rugged, Field Mountable IP55 Enclosure
Features:
l Input : Four nos. Pt 100 RTD 3 Wire (DIN 43760).
l 3 or 4 SPDT Relay contacts provided with User configurable settings.
l Weather proof case for outdoor services.
l High scanning speed (All 4 channels are scanned in less than 0.5 second)
l RS485 MODBUS RTU (Optional)
l 4 – 20mA Analog o/p for Remote indication
l Five RED LEDs to indicate FAULT, ALARM, TRIP, FAN, Power Status.
l A GREEN LED Indicates that Instrument in program mode.
l Three Yellow LEDs to indicate Auto, Max, Set status.
l If a RTD goes open circuit, it is detected, the displays “OPEN”.
l Universal Power Supply 90-260V AC/DC
l Panel Mountable Enclosure
CCU18
CCU18 is competitively priced Current Convertor unit for
Winding Temperature measurement. The Top Oil
Temperature of Transformer can be measured by our
Pt100 RTD Temperature Sensor which is then connected
to CCU18. The CT Secondary current is also connected
to CCU18. Winding Temperature is calculated by CCU18 based on the Top Oil
Temperature, CT Secondary current (load current) and temperature gradient.
CCU18 provides 2 sets of 4-20mA dc analog output corresponding to this Winding
Temperature. It also has a facility for OPEN sensor indication.
PERFECT CONTROLS
PC 7, North Road, West C.I.T. Nagar, Chennai-35, India.
Ph: 044-24330387 Email:sales@perfectcontrols.com
Since 1977
Web: www.perfectcontrols.com