Professional Documents
Culture Documents
Instruction
Individual Calculation
by
Allowable bending My
Allowable shear Vz
1)
If the system is equiped with FT-Fittings, add 10mm
3000
2500
How to make an individual calcul
Seite 1
2000
3500
Truss System
3000
2500
How to make an individual calcul
2000
1500
1000
500
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 3
The "Alu-Checker"c
copyright by:
Expo Engineering, Dipl.-Ing. Michael Lück
http://www.expo-engineering.de
phone:0049-2520-9129211 / fax:0049-2520-9129213
Seite 2
Truss System
s you individual
urotruss System!
ion
Diezel
cm2 17.719
cm 17.5
cm4 12.281
cm4 5475.453
cm 1.665
cm 17.579
cm3 273.773
kN 5.63
kNm 21.71
kN 14.9
6 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Seite 4
Truss System
1 2 3 4 5 6
Seite 5
Truss System
7 8 9 10 11 12 13
Seite 6
Truss System
13
Seite 7
Internal
L zul p(M) zul p(V) zul p zul p(+) zul p (kg/m) zul P
1 173.599 29.719 29.719 29.719 3029.459735 3029.459735
2 43.339 14.819 14.819 14.819 1510.601427 3021.202854
3 19.21677778 9.852333333 9.852333333 9.852333333 1004.315324 3012.945973
4 10.774 7.369 7.369 7.369 751.1722732 3004.689093
5 6.8662 5.879 5.879 5.879 599.2864424 2996.432212
6 4.743444444 4.885666667 4.743444444 4.743444444 483.5315438 2901.189263
7 3.463489796 4.176142857 3.463489796 3.463489796 353.0570638 2471.399447
8 2.63275 3.644 2.63275 2.63275 268.3741081 2146.992864
9 2.063197531 3.230111111 2.063197531 2.063197531 210.3157524 1892.841771
10 1.6558 2.899 1.6558 1.6558 168.7869521 1687.869521
11 1.354371901 2.628090909 1.354371901 1.354371901 138.0603365 1518.663701
12 1.125111111 2.402333333 1.125111111 1.125111111 114.6902254 1376.282705
13 0.946692308 2.211307692 0.946692308 0.946692308 96.50278366 1254.536188
14 0.805122449 2.047571429 0.805122449 0.805122449 82.0716054 1149.002476
15 0.690911111 1.905666667 0.690911111 0.690911111 70.42926719 1056.439008
16 0.5974375 1.7815 0.5974375 0.5974375 60.90086646 974.4138634
17 0.519968858 1.671941176 0.519968858 0.519968858 53.00396107 901.0673383
18 0.455049383 1.574555556 0.455049383 0.455049383 46.38627754 834.9529958
19 0.400108033 1.487421053 0.400108033 0.400108033 40.78573224 774.9289125
20 0.3532 1.409 0.3532 0.3532 36.00407747 720.0815494
21 0.3128322 1.338047619 0.3128322 0.3128322 31.8891131 669.6713752
22 0.277842975 1.273545455 0.277842975 0.277842975 28.32242357 623.0933185
23 0.24731758 1.214652174 0.24731758 0.24731758 25.21076252 579.847538
24 0.220527778 1.160666667 0.220527778 0.220527778 22.4798958 539.5174992
25 0.196888 1.111 0.196888 0.196888 20.07013252 501.7533129
26 0.175923077 1.065153846 0.175923077 0.175923077 17.93303536 466.2589195
27 0.15724417 1.022703704 0.15724417 0.15724417 16.02896739 432.7821195
28 0.140530612 0.983285714 0.140530612 0.140530612 14.3252408 401.1067424
29 0.125516052 0.946586207 0.125516052 0.125516052 12.79470462 371.046434
30 0.111977778 0.912333333 0.111977778 0.111977778 11.41465625 342.4396874
31 0.099728408 0.880290323 0.099728408 0.099728408 10.16599469 315.1458354
32 0.088609375 0.85025 0.088609375 0.088609375 9.032556065 289.0417941
33 0.078485767 0.822030303 0.078485767 0.078485767 8.000587845 264.0193989
34 0.069242215 0.795470588 0.069242215 0.069242215 7.058329718 239.9832104
35 0.060779592 0.770428571 0.060779592 0.060779592 6.195677048 216.8486967
36 0.053012346 0.746777778 0.053012346 0.053012346 5.403908836 194.5407181
37 0.045866326 0.724405405 0.045866326 0.045866326 4.675466441 172.9922583
38 0.039277008 0.703210526 0.039277008 0.039277008 4.003772509 152.1433553
39 0.033188034 0.683102564 0.033188034 0.033188034 3.383081976 131.9401971
40 0.02755 0.664 0.02755 0.02755 2.808358818 112.3343527
Seite 8
Internal
Seite 9
by
Individual calculation
Length of your beam (m) 12 Start - distribute knots ! < fill in length and click
0.081
Discribe your individual loadcase: position x (m) load (kN) supported knot? y / n Vz aus g M(A)=
knot 1 0.00 y yes 0 0.000
knot 2 0.30 no -0.0243 -0.004
knot 3 0.50 no -0.0162 -0.006
knot 4 0.90 no -0.0324 -0.023
knot 5 1.00 no -0.0081 -0.008
knot 6 - high pressure! 1.50 5.80 no -0.0405 -8.751
knot 7 1.80 no -0.0243 -0.040
knot 8 2.10 no -0.0243 -0.047
knot 9 2.40 no -0.0243 -0.055
knot 10 2.70 no -0.0243 -0.062
knot 11 3.00 no -0.0243 -0.069
knot 12 3.30 no -0.0243 -0.077
knot 13 3.60 no -0.0243 -0.084
knot 14 3.90 no -0.0243 -0.091
knot 15 4.20 no -0.0243 -0.098
knot 16 4.50 no -0.0243 -0.106
knot 17 4.80 no -0.0243 -0.113
knot 18 5.10 no -0.0243 -0.120
knot 19 5.40 no -0.0243 -0.128
knot 20 5.70 no -0.0243 -0.135
knot 21 6.00 no -0.0243 -0.142
knot 22 6.30 no -0.0243 -0.149
knot 23 6.60 no -0.0243 -0.157
knot 24 6.90 no -0.0243 -0.164
knot 25 7.20 no -0.0243 -0.171
knot 26 7.50 no -0.0243 -0.179
knot 27 7.80 no -0.0243 -0.186
knot 28 8.10 no -0.0243 -0.193
knot 29 8.40 no -0.0243 -0.200
knot 30 8.70 no -0.0243 -0.208
knot 31 9.00 no -0.0243 -0.215
knot 32 9.30 no -0.0243 -0.222
knot 33 9.60 no -0.0243 -0.230
knot 34 9.90 no -0.0243 -0.237
knot 35 10.20 no -0.0243 -0.244
knot 36 - high pressure! 10.50 5.80 no -0.0243 -61.152
knot 37 10.80 no -0.0243 -0.259
knot 38 11.10 no -0.0243 -0.266
knot 39 11.50 no -0.0324 -0.366
knot 40 11.70 no -0.0162 -0.188
knot 41 12.00 y yes -0.0243 -0.288
11.60 -0.972 -75.43
max V = 6.29 (kN) max M =
vertical shear force Vz min V= -6.29 (kN) bendingmoment My min M =
20
15
15
10
10
5
5
0
0 0
0.000 2.000 4.000 6.000 8.000 10.000 12.000 14.000 0.000 2.000 4.000 6.000 8.000 10.000 12.000 14.00
-5
-5
-10
-10
-15
-15
5
5
0 0
0.000 2.000 4.000 6.000 8.000 10.000 12.000 14.000 0.000 2.000 4.000 6.000 8.000 10.000 12.000 14.00
-5
-5
-10
-10
-15
-15
-20
-20 -25
x (m) My (kNm) max zul Vz min zul Vz max zul My min zul My
Instruction
by
Instruction
The following instructions are important to understand the individual calculation. Read them first, th
of this sheet to start your calculation!
Also local stresses can be limiting smal areas, so the maximum point-pressure on each main tube is conside
A simulation on a surface of 40mm x 3mm is the basic for the decl
Much higher loads are possible if you use round surfaced couplers
The thickness of the maintubes´wall is the limiting parameter. If you choose a higher load than the possible
point-pressure the "knot numbers" will remind you: "high pressure" - use round surfaced couplers!
The individual calculation determins the shear force and the bending moments and compares them to the
permissible values of the truss system.
If your loadcase creates more than permissible values for Vz,My - the programm gives you a warning:
Seite 24
Instruction
The input
You can create an individual loadcase with 2 supports.
The koordinate of each load and of the position of the supports is defined by you.
First fill in the whole length of the (beam) truss, than klick "Start - distribute knots"
Than put your loads on the relevant knots. And mark supported knots with a "y" (yes).
You also can put on a global distributed load. The selfweight is always considered by the programm.
1 kN <> 100 kg
A B
Seite 25
A B
Instruction
dimensions in (cm) 200 300 300 400 800
After choosing "FD34" return to the calculation - the input should look like this:
Seite 26
Instruction
The results:
Now we click on the "system change button" on top of the page and choose "ST"
Seite 27
Instruction
The ST-Truss is capable for high loads and is only stressed with a lower utilisation.
You will also be informed abaut the reactions of the system on the support. This helps you to
choose the right shakles, spansets, steels and hoists.
for ST
Always remember:
The author, and all distributors of this Programm are not responsible for any damage or harm to equipment
We designed it and will develope it as good as we can to give you best support for your Eurotruss - System.
Even if your individual calculation gives you "green light" consider the dynamic of hoists etc.
If you reach high utilisation, the elastic deflection of your system might be unsightly.
If you want to be insured, ask your dealer or Eurotruss, or Expo-Engineering.
Seite 28
Instruction
Seite 29
Instruction
Seite 30
Instruction
Seite 31
B
Instruction
Seite 32
Instruction
Seite 33
Instruction
Seite 34