Professional Documents
Culture Documents
SPECIFICATIONS
PAGE 2 Most Important Combination Key:
Calibrate Weight
Initialize Network
1. Before turning ON the scale, Press (hold) RE-ZERO and PRE-PACK then turn ON
the scale.
2. Press * (Total Print) three times.
3. Press C (Clear the Memory).
4. Restart Scale (Off then On the scale).
4. Press 3 X then Press the desired flag code (ex. 20) then Press *.
Note: 20 is the flag code in your barcode. Your barcode format is FF CCCCC
XXXXX CD where FF = 20 or any 2 digit number CCCCC = is your “item code”
XXXXX = is your “Price” and CD = is your “Check digit” (Machine generated)
5. Press 20 then *
6. Press 4 X then Press the desired flag code (ex. 20) then Press *.
7. Press 10 X then Press 20 then *
8. Press 17 X then Press 0 then * (MM/DD/YY)
9. Press 24 X then Press 16 then *
10. Press 25 X the Press 16 then *
11. Press 28 X then Press 0 (to Disable PEEL SENSOR/PPK), then Press *
12. Press 156 X then Press 1 * (Enable Image LOGO)
13. Press 233 X then Press 1 * (12 hour)
14. Press 250 X then Press 1 *
15. Press Code#PLU to save data.
Note: Procedures listed above from 1 to 11 is for STANDALONE SETUP only,
If you wish to setup w.scale to SERVER SETUP (Connected to LAN),
Pls. continue the ff. procedures listed below.
PAGE 4
16. Press 48 X the Press (last 3 digit of IP address ex. 100 for 192.168.0.100)
then *
17. Press 49 X then Press 2 then * for Twisted Cable
18. Press 50 X then Press 1 then * Server/Workst
19. Press 135 X then Press (Same value that you have enter in 48 X Ex.100)
then *
20. Press Code#Plu to save data.
21. Please wait while saving in progress, if saving of data is complete,
Please turn off the w.scale located at the back.
(Note: Label format, Text format, Shopname and All PLU will be erased and need to
Re-Program again)
1. Before turning On the scale, Press Re-Zero (hold) then Press -> (FEED) then turn
ON the w.scale, Release all Pressed keys if you see this on screen “MEMORY
CLEAR?” Press C to clear or T to cancel memory clear.
2. Please wait then Press Rezero.
1. Before turning on the scale, Press and hold Re-Zero and C (Clear) then Switch ON the scale.
2. Press C to initialize network.
3. Restart the scale and then press Re-zero.
KEY
X Y TOTAL TOTAL CHAR X Y
DESCRIPTION TO ANGLE STATUS THICKNESS
POSITION POSITION WIDTH HEIGHT SIZE DIAGONAL DIAGONAL
PRESS
PLU No. 1X* 19 mm 3 mm 0 DG 7 (all print) S4
Price 2X* 16 mm 6 mm 0 DG 7 (all print) M5
Unit Price 3X* 20 mm 21 mm 0 DG 7 (all print) M3
Weight 4X* 21 mm 14 mm 0 DG 3 (1st and 2nd PC) M3
Quantity 5X* 18 mm 15 mm 0 DG 4 (non wt items) M3
Pack Date 6X* 18 mm 3 mm 0 DG 0 (no print) S4
Commodity 8X* 0 mm 25 mm 0 DG 40 mm 9 mm 7 (all print)
Qty. Unit 9X* 30 mm 15 mm 0 DG 7 (all print) M3
Barcode 12X* 15 mm 2 mm 90 DG 15 mm 7 (all print)
Shop name 13X* 0 mm 36 mm 0 DG 40 mm 10 mm 7 (all print)
Scale# 19X* 5 mm 0 mm 0 DG 7 (all print) S5
Frame 1 22X* 16 mm 2 mm 0 DG 7 (all print) 4 dots 38 mm 14 mm
Frame 2 23X* 17 mm 10 mm 0 DG 7 (all print) 1 mm 20 mm 11 mm
Text 1 26X* 18 mm 17 mm 0 DG 12 mm 4 mm 3 (1st and 2nd PC)
Text 2 27X* 18 mm 24 mm 0 DG 12 mm 4 mm 4 (non wt items)
Text 3 28X* 18 mm 24 mm 0 DG 12 mm 4 mm 3 (1st and 2nd PC)
Text 4 29X* 26 mm 2 mm 0 DG 13 mm 4 mm 7 (all print)
Text 5 30X* 17 mm 2 mm 0 DG 5 mm 4 mm 7 (all print)
Text 7 32X* 17 mm 5 mm 0 DG 9 mm 8 mm 7 (all print)
SPECS 142 = 617=1, 629X0, 645X1, 646X1, 684X1, 676X1, 692X1, 697X1, 699X1. Press Code Plu
To save the Restart the machine using Switch found at the back of W.Scale.
LABEL FORMAT
1X PLU NO. 22*,10*,*,7* S4
2X PRICE 17*,0*,*,7* M5
3X U.PRICE 17*,21*,*,7* M3
4X WEIGHT 17*,14*,*,3* M3
5X QUANTITY 13*,14*,*,4* M3
8X COMMODITY 0*,26*,*,38*,8*,7*
12X BARCODE 15*,2*,90DG (PPK DP>>)*,14*,7*
13X SHOPNAME 0*,35*,*,38*,8*,7*
19X SCALE # 2*,0*,*,7* S5
26X TEXT 1 17*,17*,*,12*,4*,3*
27X TEXT 2 17*,24*,*,12*,4*,4*
28X TEXT 3 17*,24*,*,12*,4*,3*
29X TEXT 4 17*,17*,*,13*,4*,7*
30X TEXT 5 17*,9*,*,13*,4*,7*
31X TEXT 6 6*,0*,*,4*,3*,7*
PRESS CODE PLU TO SAVE DATA THEN PROCEED TO TEXT FORMAT
TEXT FORMAT
TEXT 1 WEIGHT S4
TEXT 2 PRICE/PC S4
TEXT 3 PRICE/KG S4
TEXT 4 QUANTITY S4
TEXT 5 PLU#:
TEXT 6 @ S4
PRESS CODE PLU TO SAVE DATA AND TRY TO PRINT ITEMS.
1. Press M, Rezero, M
2. Enter PLU # to delete
3. Press – (minus sign)
4. Press C if Yes, T if No
5. Press M,M,M to exit PAGE 7
1. Press M, Rezero, M
2. Press 7 then X
3. Press CLERK # to delete (ex. 1)
4. Press – (minus sign)
5. Press C to delete Clerk
6. Press M,M,M to exit
PAGE 7