You are on page 1of 2

1. Find the no. of moles in 500g of CaCO3.

[Ca=40, C=12, O=16]


2. Calculate the molarity of a solution containing 4g of NaOH in 5L of solution.
3. Calculate Volume, Mass, No. of molecules in 3 moles of CO2.
4. Calculate the oxidation no. of Cl in CaOCl2.
5. 7.5g of a gas to occupy 5.8L of volume at STP the gas is?
6. If 1021 molecules are removed from 200mg of CO2, then the number of moles of CO2 left are?
7. Assume fully decomposed, the volume of CO2 released at STP on heating 9.85g of BaCO3
(atomic mass of Ba=137) will be?
8. What is the weight of oxygen required for the complete combustion of 2.8 kg of ethylene?
9. Ca(OH)2 + H3PO4 → CaHPO4 + 2H2O The equivalent weight of H3PO4(98g) in the above reaction
is?
10.If 1.2 g of a metal displaces 1.12L hydrogen at NTP, equivalent weight of metal would be?
11.The oxide of a metal has 32% oxygen. Its equivalent weight of metal would be?
12.When a metal is burnt, its weight is increased by 24%. The equivalent weight of the metal will
be?
13.Equivalent weight of bivalent metal is 32.7. Molecular weight of the Chloride is?
14.The chloride of a metal contains 71% chlorine by weight and the vapour density of it is 50. The
atomic weight of the metal will be.
15.20g of an acid furnishes 0.5 moles of H3O+ ions in it aqueous solution. The value of 1g eq. of
acid will be?
16.One mole of chlorine combines with certain weight of metal giving 111g of its chloride. The
same amount of metal can displace 2g of hydrogen from an acid. The atomic weight of the
metal is?
17.1.520g of the hydroxide of a metal on ignition gave 0.5g of its oxide. The equivalent weight of
metal is?
18.The vapour density of a volatile chloride of a metal is 95 and the specific heat capacity of the
metal is 0.13 Calk/g. The equivalent weight of the metal will be approximately?
19.1.60g of a metal were dissolved in HNO3 to prepare its nitrate. The nitrate on heating gives 2g
of oxide. The equivalent weight of the metal is?
20.In the reaction 2Na2S2O3 + I2 → Na2S2O6 + 2NaI. The equivalent weight of Na2S2O3 is equal to?
21.The equivalent weight of MnSO4 is half its molecular weight when it is converted to?
22.Ca(OH)2 + H3PO4 → CaHPO4 + 2H2O. The equivalent weight of H3PO4 in above reaction is?
23.In the equation H2S + 2HNO3 → 2H2O + 2NO2 + S. The equivalent weight of hydrogen sulphide
is?
24.50g of urea is dissolved in 150g of water. Find the percentage by mass.
25.4g of NaOH is dissolved in water to form 100ml solution. Find the molarity of solution.
26.98g of H2SO4 is dissolved in water to make a solution of 500ml. Find Molarity.
27.Calculate no. of moles and millimoles and weight of NaOH in 500ml of 3M solution.
28.40g NaOh is dissolved in water to form 500ml solution. Find the normality.
29.Find the normality of a solution H2SO4 whose volume is 200ml and the mass of solute is 49g.
30.500ml 2M NaOH solution was diluted with water and the volume made upto 1L. Find the
molarity of new solution.
31.Calculate the molality of KCl solution prepared by dissolving 7.45g of KCl in 500ml of the
solution.
32.Calculate the molality of 3M solution of NaCl whose density is 1.25g/ml.
33.0.52g of a dibasic acid required 100ml of 0.1n NaOH for complete neutralization. The
equivalent weight of acid is.
34.A solution of NaOH in water is 2M. Find the molar fraction of the solute.
35.How much water is to be added to dilute 10ml of 10N HCl to make it decinormal?
36.Sufficient water is added to 9.8g of H2SO4 solution to make it to 500ml solution. Find the
normality.
37.What will be the normality of a solution obtained by mixing 0.45N and 0.6 N NaOH in the ratio
2:1 by volume?
38.5ml of N HCl, 20ml of N/2 H2SO4 and 30ml of n/3 HNO3 are mixed together and the volume
made 1 L.
39.To neutralize 20ml of M/10 NaOH, the volume of M/20 HCl needed is.
40.100ml each of 0.5N NaOH, N/5 HCl and N/10 H2SO4 are mixed together. The resulting solution
will be?
41.H3PO4 is a tribasic acid and one of its salts in NaH2PO4. What volume of 1M NaOH should be
added to 12g NaH2PO4 to exactly convert it into Na3PO4?
42.1g pure Calcium Carbonate was found to require 50ml of dil. HCl for complete reaction. The
strength of HCl solution is?
43.Volume of 0.1M NaOH needed for the neutralization of 20ml of 0.05M oxalic acid.
44.0.7g of Na2CO3.xH2O were dissolved in water and the volume was made to 100ml, 20ml of this
solution required 19.8ml of N/10 HCl for complete neutralization. The value of x is?
45.Weight of FeSO4 oxidised by 200ml of 1N KMnO4 solution is?
46.What volume of 3M HNO3 is needed to oxidise 8g of Fe2+ to Fe3+? HNO3 gets converted to NO.
47.How many milliliters of 0.5N SnCl2 solution will reduce 600ml of 0.1N HgCl2 to Hg2Cl2?
48.The number of moles of ferrous oxalate oxidized by one mole of KMnO4 is?
49.The number of moles of potassium salt, i.e. KHC2O4.H2C2O4.2H2O oxidized by one mole of
permagnate ion is?
50.When one mole of KMnO4 reacts with HCl, the volume of chloride liberated at NTP will be?

You might also like