Professional Documents
Culture Documents
linear globe
valve actuators
Product Guide
F-27272.qxd 10/20/2003 10:28 AM Page 2
Invensys is...Innovation...Invention...Systems
2
F-27272.qxd 10/20/2003 10:28 AM Page 3
• 220 lbf (979 N) with 5/8” (16 mm) or 1-1/16" (27 mm)
linear stroke
• Direct mounts to globe valves with integral linkage
• Available in Two-Position, Floating and Proportional
models with Spring Return
• Automatically sets input span to match valve travel
• Manual override to allow positioning of valve and
preload
• UL, cUL, CE and C-Tick approvals
TM
5
year
warranty MX51-7203 and MX61-7203 Series
3
F-27272.qxd 10/20/2003 10:29 AM Page 4
Compact Size
Allows more room to maneauver in tight spaces 5
year
warranty
Note: For illustration purposes only. Actual size not shown.
4
F-27272.qxd 10/20/2003 10:29 AM Page 5
Stall Protection
Electronic overload protection prevents
actuator damage
5-Year Warranty
5-year warranty from date of manufacture,
represents our dedication to quality
TM
5
year
warranty
5
F-27272.qxd 10/20/2003 10:29 AM Page 6
Easy Installation
Integral linkage for 1/2” to 2” valves
8
F-27272.qxd 10/20/2003 10:30 AM Page 9
9
F-27272.qxd 10/20/2003 10:30 AM Page 10
10
F-27272.qxd 10/20/2003 10:30 AM Page 11
11
F-27272.qxd 10/20/2003 10:30 AM Page 12
12
F-27272.qxd 10/20/2003 10:30 AM Page 13
13
F-27272.qxd 10/20/2003 10:30 AM Page 14
Specifications
Specifications
Inputs
Control Signal MA51-710X — Two-Position.
MF51 -7103 — Floating point control, 24 Vac.
MS51-7103 — Proportional, 2 - 10 Vdc, 0 - 3 Vdc, 6 - 9 Vdc, 0 - 10
Vdc or 4 - 20 mAdc.
Power All 24 Vac circuits are Class 2. All circuits 30 Vac and above are Class 1.
Features:
Requirements Power Input Approximate
• Two position models Stroke Timing in
controlled by SPST Part Number Wiring
Running
50/60 Hz DC
Holding Seconds @ 70F
50/60 Hz (21°C)a
controller Voltage
System Amps
VA W W Powered SR
• Floating models controlled MA51-7103-000 24Vac ±20% Appliance Wire 5.3 4.1 0.15 1.2
by SPDT floating controllers MA51-7103-100 20-30 Vdc Plenum Cable 5.3 4.1 0.15 1.2
• 24 Vac, 120 Vac, and 230 MS51-7103-100 Plenum Cable 6.6 4.2 0.14 1.5
• Automatically sets input MS51-7103-150 Plenum Cable 6.6 4.2 0.14 1.5
span to match valve travel. MS51-7103-060 Appliance Wire 6.6 4.2 0.14 1.5
MS51-7103-160 Plenum Cable 6.6 4.2 0.14 1.5
• Compact size to allow a Timing was measured with the actuator mounted on a VB-7XXX Series valve.
installation in limited space b Has 20 Vdc power supply for System 8000 applications.
• Manual override to allow Connections 3 ft (91 cm) appliance wire or plenum cables, enclosure accepts
positioning of valve and 1/2” (13 mm) conduit connectors. For M20 Metric connector, use AM-756
preload adaptor.
• Direct mount to valves with Motor Type Brushless DC
integral linkage Outputs
• Five year warranty Electrical Position Feedback Voltage (proportional or floating only)
For voltage ranges, the feedback signal is the same range as the input
signal. The 4-20mAdc current range and floating actuators have a 2-10
Vdc position feedback signal. The position feedback signal can supply up
to 0.5 mA to operate up to four additional slave actuators.
14
F-27272.qxd 10/20/2003 10:30 AM Page 15
Mounting Dimensions
6-49/64
(172)
8-1/16
(205)
6-5/16 3-1/2
(160) (89)
5-5/64
(129)
Dimensions shown
are in inches (mm).
15
F-27272.qxd 10/20/2003 10:30 AM Page 16
• 24 Vac, 120 Vac, and 230 MF61-7203 24 Vac ±20% 22-30 Vdc 9.8 7.7 9.7 7.7 .30 3.3 <190 <40
Vac models MS51-7203 24 Vac ±20% 22-30 Vdc 9.8 7.4 9.7 7.4 .28 2.9 <100 <35
MS61-7203 24 Vac ±20% 22-30 Vdc 9.8 7.4 9.7 7.4 .28 2.9 <190 <40
• Rugged die-cast housings
a
rated for NEMA 2, UL Type Timing was measured with no load applied to the actuator.
2/IP54 Connections 3 ft (91 cm) appliance cables, 1/2 inch (13 mm) conduit connectors. For M20
Metric conduit, use AM-756 adaptor.
• Overload protection
Motor Type Brushless DC.
throughout stroke
Outputs
• Compact size to allow Electrical Position Feedback Voltage (proportional only):
installation in limited space
MSX1-7203 — 2 - 10 Vdc (max. 0.5 mA) output signal for position feedback or
• Manual override to allow to operate up to four additional slave actuators.
positioning of valve and Mechanical Output torque rating: 220 lbf (979 N)
preload Linear Stroke: MX51-720X — 5/8" (16 mm). MX61-720X — 1-1/16” (27 mm).
• Direct mount to valves with Approx. Stroke Timing: 100 seconds for 5/8" stroke. 190 seconds for
1-1/16” stroke.
integral linkage
Manual Override: Allows positioning of valve and preload using manual crank.
• Five year warranty
Right/Left Switch: Permits reverse acting/direct acting linear motion
(MSX1 only).
16
F-27272.qxd 10/20/2003 10:30 AM Page 17
Specifications Continued
Environment
Ambient Shipping and storage: -40 to 160 °F (-40 to 71 °C).
Temperature Limits Operating: 0 to 140 °F (-18 to 60 °C).
Temperature Restrictions:
Max. Allowable Ambient
Actuator @ Max. Fluid Temperatures Valve Body
140 °F (60 °C)@ 281 °F (138 °C) VB-721X, 722X
120 °F (49 °C)@ 300 °F (149 °C) VB-73XX
MX51-720X
100 °F (38 °C)@ 340 °F (171 °C) VB-725X, 726X
90 °F (32 °C)@ 366 °F (186 °C) VB-727X, 728X
MX61-720X 140 °F (60 °C)@ 300 °F (149 °C) VB-9XXX, 2-1/2" to 4" current production
Humidity 15 to 95% RH, non-condensing.
Locations NEMA1. NEMA 2, UL Type 2 (IEC IP54) with customer supplied watertight conduit connectors.
Agency Listings
UL UL-873, Underwriters Laboratories (File #E9429 Category Temperature-Indicating and Regulating
Equipment).
European Community EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC).
cUL UL Listed for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
Australia This product meets requirements to bear the C-Tick Mark according to the terms specified by the
Communications Authority under the Radiocommunications Act 1992.
Accessories
AM-763 1/8” Hexcrank for manual override
AM-756 Metric conduit adapter M20 x 1.5 to 1/2” NPT
AM-731 Mounting kit - MX51-720X (included with actuator)
AM-732 Mounting kit - MX61-720X (included with actuator)
AM-733 Obsolete VB-9XXX retrofit kit 1-1/2 to 2" valves after 9404 date code
AM-734 Obsolete VB-9XXX retrofit kit 1-1/2 to 2" valves prior to 9404 date code
For MSX1-7203 Models
AM-703 Input rescaling module, adjust signals to 2-10 Vac, zero and span adjust
AM-704 Interface, pulse width modulation (PWM)
AM-705 Positioner (NEMA 4 housing)
AM-706 Min and/or manual positioner for flush panel mount
AM-708 500 ohm resistor for 4 to 20 mA control signal
Mounting Dimensions
9/16 10-9/16 (268)
(14)
2-33/64
(64)
R
R
4 7 4
CK
CK
R
LO
LO
R
9-1/2
(241)
9-1/4 (235)
9-1/4 (235)
Dimensions shown
are in inches (mm).
17
F-27272.qxd 10/20/2003 10:31 AM Page 18
18
F-27272.qxd 10/20/2003 10:31 AM Page 19
Specifications Continued
Environment
Ambient Temperature Shipping and storage: -40 to 160°F (-40 to 71°C).
Limits
Operating:
Minimum 0°F (-18°C).
Maximum See table below.
Valve Body Maximum Allowable Ambient Temperaturea
Temperature °F (°C)
Part Number Maximum Allowable Fluid Temperature
VB-7213-0-4-P
VB-7214-0-4-P Maximum Ambient Temperature 125 (52)
VB-7215-0-4-P Max. Allowable Fluid Temperature 281 (138)
VB-9213-0-X-P
Maximum Ambient Temperature 100 (38)
VB-7253-0-4-P
Max. Allowable Fluid Temperature 340 (171)
Maximum Ambient Temperature 100 (38)
VB-7273-0-4-P
Max. Allowable Fluid Temperature 366 (185)
VB-7313-0-4-P
VB-7314-0-4-P Maximum Ambient Temperature 125 (52)
VB-7315-0-4-P Max. Allowable Fluid Temperature 281 (138)
VB-9313-0-X-P
Maximum Ambient Temperature 100 (38)
VB-9313-0-5-P
Max. Allowable Fluid Temperature 300 (149)
Maximum Ambient Temperature 125 (52)
VB-7323-0-4-P
Max. Allowable Fluid Temperature 281 (138)
a
When used with chilled water, the maximum allowable ambient temperture is 140 °F (60 °C). When used with hot water, the maximum allowable ambient temperature is affected
by heat transferance from the valve. This allows slightly lower temperatures, as listed, for proper operation of the actuator.
Mounting Dimensions
3-5/8"
5-5/8"
(92 mm)
(143 mm)
6"
(152 mm)
19
F-27272.qxd 10/20/2003 10:31 AM Page 20
or 4 - 20 mA Connections 4 foot (1.2 m) color coded 18 AWG, plenum cable rated for UL.
Motor Type Synchronous
• 45 lbf (200 N) output with Outputs
automatic load limit for Electrical Position Feedback Signal: 2 - 10 Vdc non-adjustable.
self-adjusting travel and Connections: 4 foot (1.2 m) color coded 18 AWG, plenum cable
long motor life rated for UL.
Mechanical Force: 45 lbf (200 N) minimum with automatic load limit.
• Synchronous motor for Stroke: Up to 9/16" (14.3 mm) maximum, self-adjusting.
consistent timing Timing: Reference Power Requirements table above.
• Manual override with Valve Body Part Numbera Valve Sizes
Close-off Pressure (psi)b
Nominal
automatic release Two-Way Valves 1/2" 130
VB-7211 3/4" 80
• 2 - 10 Vdc actuator VB-7212 1" 40
position feedback signal VB-7213
VB-7214 1-1/4" 25
VB-7215c
• Integral linkage for all Three-Way Mixing Valves 1/2" 130
standard 1/2" to 1-1/4" VB-7312 3/4" 80
IBS two-way stem-up VB-7313
VB-7314
1" 40
bodies for a wide variety a MS-22353 actuators may also be used with VB-9XXX valves. Refer to Invensys Building Systems
of applications b
Components, F-25683, for available valves.
Close off ratings describe only the differential pressure which the actuator can close with adequate
seating force. Refer to Invensys Building Systems Components, F-25683
• Compact size for c Metric thread 15 to 32 mm (Rp 1/2 to Rp 1-1/4).
application flexibility Environment
Ambient Shipping and storage: -40 to 160°F (-40 to 71°C).
• Rugged construction with Temperature
die cast housing Limits
Operating:
20
F-27272.qxd 10/20/2003 10:31 AM Page 21
Specifications Continued
Environment Continued
Humidity 5 to 95% RH, non-condensing. See Temperature Limits Table page 20 for maximum dew point
temperature.
Locations NEMA Type 1.
Enclosure Protection IP31 according to EN 60529, BS EN 60529.
Class
Agency Listings
UL UL 873, Underwriters Laboratories (File # E9429 Category Temperature-Indicating and Regulating
Equipment).
cUL Certified for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
European Community EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC).
Accessories
AV-641 Valve linkage kit (replacement parts only, order separately)
AV-642 Four-way valve linkage kit for Controlli valve bodies
AV-644 Valve linkage kit (included with MS-22353 actuator)
AM-756 Metric male 20 mm conduit fitting (m20 x 1.5 - 8g) 11 mm nominal thread length
Mounting Dimensions
3-5/16
(84)
3 (76)
5-9/16 (141)
Optional metric conduit fitting (AM-756)
Dimensions shown are in inches (mm). adds 37/64" (15 mm) to overall length.
21
F-27272.qxd 10/20/2003 10:31 AM Page 22
22
F-27272.qxd 10/20/2003 10:31 AM Page 23
Specifications Continued
Environment
Ambient Temperature Shipping and storage: -40 to 160°F (-40 to 71°C).
Limits
Operating:
Minimum 40°F (4°C).
Maximum See table below.
Humidity 5 to 95% RH, non-condensing. See Temperature Limits table above for maximum dew point temperature.
Locations NEMA Type 1.
Enclosure Protection Designed to meet IP31Class, according to EN 60529, BS EN 60529.
Class
Agency Listings
UL UL 873, Underwriters Laboratories (File # E9429 Category Temperature-Indicating and Regulating
Equipment).
cUL Certified for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
European Community EMC Directive (89/336/EEC).
Accessories
AV-641 Valve linkage kit (replacement parts only, order separately)
AV-642 Four-way valve linkage kit for Controlli valve bodies
AV-644 Valve linkage kit (included with MS-22353 actuator)
AM-756 Metric male 20 mm conduit fitting (m20 x 1.5 - 8g) 11 mm nominal thread length
Mounting Dimensions
3-5/16
(84)
3 (76)
5-9/16 (141)
Optional metric conduit fitting (AM-756)
Dimensions shown are in inches (mm). adds 37/64" (15 mm) to overall length.
23
F-27272.qxd 10/20/2003 10:32 AM Page 24
• 80 lbf (355 N) of output Connections 4 foot (1.2 m) color coded 18 AWG, UL rated plenum cable.
Motor Type Synchronous
• Synchronous motor for Outputs
consistent timing Electrical Position Feedback Signal: 15K ohm nominal potentiometer.
• Manual override with Reference Power Requirements table above.
automatic release Connections: 4 foot (1.2 m) color coded 18 AWG, UL rated plenum
cable.
• Optional feedback Mechanical Force: 80 lbf (355 N) minimum at low line voltage (-15%).
potentiometer available Stroke: Up to 9/16" (14.3 mm) maximum, self-adjusting.
for precision control or Timing: Reference Power Requirements table above.
position indication Manual Operator: Allows actuator to be manually set at any position
• Integral linkage for all upon loss of power. Releases automatically when power is restored.
standard 1/2" to 2" IBS
two-way stem-up open Valve Body Part Numbera Valve Sizes
Close-off Pressure (psi)b
and three-way valve Two-Way Valves 1/2"
Nominal
250
bodies for a wide variety VB-7213 3/4" 170
of applications VB-7214
VB-7215c
1" 80
1-1/4" 50
• Compact size for VB-7253
VB-7273
1-1/2" 33
2" 16
application flexibility 1/2" 250
Three-Way Mixing Valves 3/4" 170
• Rugged construction with VB-7312
1" 80
VB-7313
die cast housing VB-7314
1-1/4" 50
VB-7315c 1-1/2" 33
2" 16
Three-Way Diverting Valves
All Sizes 250
VB-7332
a Close off ratings describe only the differential pressure which the actuator can close with adequate
seating force. Refer to Invensys Building Systems Components Catalog, F-25683.
24
F-27272.qxd 10/20/2003 10:32 AM Page 25
Specifications Continued
Environment
Ambient Temperature Shipping and storage: -40 to 160°F (-40 to 71°C).
Limits
Operating:
Minimum 40°F (4°C).
Maximum See table below.
Humidity 5 to 95% RH, non-condensing. See Temperature Limits table above for maximum dew point temperature.
Locations NEMA Type 1.
Enclosure Protection Designed to meet IP31Class, according to EN 60529, BS EN 60529.
Class
Agency Listings
UL UL 873, Underwriters Laboratories (File # E9429 Category Temperature-Indicating and Regulating
Equipment).
cUL Certified for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
European Community EMC Directive (89/336/EEC).
Accessories
AV-644 Valve linkage kit (included with MF-23XX3 actuator)
AM-756 Metric male 20 mm conduit fitting (m20 x 1.5 - 8g) 11 mm nominal thread length
Mounting Dimensions
3-5/16
(84)
3 (76)
5-9/16 (141)
Optional metric conduit fitting (AM-756)
Dimensions shown are in inches (mm). adds 37/64" (15 mm) to overall length.
25
26
F-27272.qxd
10/20/2003
Accessories
10:33 AM
Page 26
MA51-710X Series
MAX1-720X Series
MFX1-7103 Series
MFX1-7203 Series
SR Actuators
MS51-7103 Series
MSX1-7203 Series
MF-631X3 Series
MF-22XX3 Series
MF-23XX3 Series
NSR Actuators
MS-22353 Series
F-27272.qxd 10/20/2003 10:34 AM Page 27
Accessories
27
F-27272.qxd 10/20/2003 10:35 AM Page 28
Accessories
28
F-27272.qxd 10/20/2003 10:35 AM Page 29
Accessories
29
F-27272.qxd 10/20/2003 10:37 AM Page 30
Accessories
30
F-27272.qxd 10/20/2003 10:37 AM Page 31
Accessories
31
F-27272.qxd 10/20/2003 10:38 AM Page 32
Accessories
48
F-27272.qxd 10/20/2003 10:38 AM Page 33
Accessories
49
F-27272.qxd 10/20/2003 10:39 AM Page 34
The cross reference tables list Invensys Building Systems Direct-Coupled Actuators which may
replace obsolete SEC and Belimo devices, as well as older Invensys devices. The tables list
two-position, floating, and proportional actuators. The devices to be replaced are listed
alphanumerically in the left-hand column, with the suggested Invensys replacement in the center
column. The replacement actuators in this list represent what we believe are equivalent units.
50
F-27272.qxd 10/20/2003 10:39 AM Page 35
51
F-27272.qxd 10/20/2003 10:39 AM Page 36
52
F-27272.qxd 10/20/2003 10:39 AM Page 37
53
F-27272.qxd 10/20/2003 10:39 AM Page 38
54
F-27272.qxd 10/20/2003 10:39 AM Page 39
Notes
55
F-27272.qxd 10/20/2003 10:39 AM Page 40
Invensys Climate Controls Copyright 2003 Invensys plc. All rights reserved.
Americas No part of this document may be photocopied or reproduced by any
means, or translated to another language without prior written
1354 Clifford Avenue, (61111) consent of Invensys. All specifications are nominal and may change
P.O. Box 2940 as design improvements are introduced. Invensys shall not be liable
Loves Park, Illinois 61132-2940 for damages resulting from misapplication or misuse of its products.
(888) 444-1311 Invensys, DuraDrive, and DuraLynx are trademarks of Invensys plc
(815) 637-3000 and its subsidiaries and affiliates.
Fax: (815) 637-5300
All other trademarks are the property of their respective owners.
www.invensysibs.com