The document discusses the true stress-strain relationship in the plastic region of a material. It can be expressed as σ=Kεn, where K is the strength coefficient and n is the strain hardening exponent. The document derives the ultimate tensile strength σT as 540 MPa, the true strain at failure εT as 0.3, and the strength coefficient K as 775 MPa based on the power law relationship between true stress and true strain at failure. The true stress-strain relationship in the plastic region is then given as σ=775ε0.3.
The document discusses the true stress-strain relationship in the plastic region of a material. It can be expressed as σ=Kεn, where K is the strength coefficient and n is the strain hardening exponent. The document derives the ultimate tensile strength σT as 540 MPa, the true strain at failure εT as 0.3, and the strength coefficient K as 775 MPa based on the power law relationship between true stress and true strain at failure. The true stress-strain relationship in the plastic region is then given as σ=775ε0.3.
The document discusses the true stress-strain relationship in the plastic region of a material. It can be expressed as σ=Kεn, where K is the strength coefficient and n is the strain hardening exponent. The document derives the ultimate tensile strength σT as 540 MPa, the true strain at failure εT as 0.3, and the strength coefficient K as 775 MPa based on the power law relationship between true stress and true strain at failure. The true stress-strain relationship in the plastic region is then given as σ=775ε0.3.
True Stress – Strain relation in Plastic region can be expressed as σ=K ϵn
where K is strength coefficient and n is strain hardening exponent
At ultimate tensile strength ϵ T =n ϵ T =n=ln (1+ e)=ln(1+0.35)=0.30 σT =σ (1+e)=400( 1=0.35)=540 from power law σT =K ϵ nT 540=K 0.3 0.3 540 =K=775 MPa 0.30.3
True Stress – Strain relation in Plastic region is σ=K ϵn