Professional Documents
Culture Documents
FocusPRO® 5000 Series FocusPRO® 6000 Series Test the system’s heating, emergency heat, cooling, and fan.
Available tests vary by thermostat and system type.
1. To begin, press and hold the s and t buttons until the 1. To begin, press and hold the s and t buttons until the Table 2. Installer System Test
display changes. display changes. System Test Test Type System Status Number
Number and Description
10 Heating system 0 Heat and fan off
FocusPRO® 5000
1 First stage heat
on (Fan turns on if
Setup Function 1 is
set to 1, 5, 9, or 10
Thermostats
3 Third stage heat
on
20 Emergency 0 Heat and fan off
2. Presss/t to turn system on/off. 2. Presss/t to turn system on/off. heating system 1 Heat and fan on
2 Second stage heat
(Aux. heat) turns on
10 0 10 0 40 Fan system
2
0
1
Second stage
compressor on
Off
On
69-2026
6 7 8
installer setup installer setup functions
Available option and default settings vary by thermostat.
1 1
(Auto)
0 0
(O/B terminal) 1 Controls valve in heating
3 Fan control 0 Gas/Oil heat (equipment 13 Adaptive Intel- 1 On
(heating) controls heating fan) ligent RecoveryTM 0 Off
1 Electric furnace (thermo- 14 Temperature 0 Fahrenheit
stat controls heating fan) display 1 Celsius
Done Next Done Next 5 First stage heat 5 Gas or oil furnaces of 15 Compressor 5 5-minute compressor
cycle rate less than 90% protection off time Printed in U.S.A. on recycled
efficiency [Other options: 0–4 paper containing at least 10%
1 Steam or gravity minutes] post-consumer paper fibers.
3. Press NEXT to advance to the next function. 3. Press NEXT to advance to the next function. 3 Hot water systems or fur- 16 Schedule format 0 5/2 (weekdays
4. Press DONE to exit and save settings. 4. Press DONE to exit and save settings. naces of 90%+ efficiency Automation and Control Solutions
and weekends
5. Proceed to Installer Setup Functions on page 4. 5. Proceed to Installer Setup Functions on page 4. 9 Electric furnaces programmable) Honeywell International Inc.
[Other options: 1–12] 1 5/1/1 (weekdays,
6 Second stage 5 Gas or oil furnaces of Saturday, and Sunday 1985 Douglas Drive North
heat/Aux heat less than 90% efficiency programmable)
Golden Valley, MN 55422
cycle rate 1 Steam or gravity 26 Auxiliary heat 0 Comfort
3 Hot water systems or fur- control 1 Economy
naces of 90%+ efficiency
9 Electric furnaces
27 Heat temperature 90 Max. heat temperature Honeywell Limited-Honeywell Limitée
range stops setting is 90°F (32°C)
[Other options: 1–12] 35 Dynamic Drive
[Other options: 40–89°F
7 Auxiliary heat 5 Gas or oil furnaces of (4.5°C to 32°C)]
cycle rate less than 90% efficiency Toronto, Ontario M1V 4Z9
28 Cool temperature 50 Min. cool temperature
1 Steam or gravity http://yourhome.honeywell.com
range stop setting is 50°F (10°C)
3 Hot water systems or fur-
[Other options: 51–99°F
naces of 90%+ efficiency ® U.S. Registered Trademark
(10.5°C to 37°C)]
9 Electric furnaces © 2006 Honeywell International Inc.
US Patent No. 6595430, D509151; other
[Other options: 1–12] Patents Pending. All Rights Reserved
Functions 13 and 16 only available on the 6000 series; 69-2026 M.S. 09-06
function 26 only available on the 5000 series
2 3 4 5