Professional Documents
Culture Documents
Page 1 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
1.2. 3450.00 Providing and fixing in position Full/Low Height 40.00 16.14 138000.00 55672.31
Partition consisting of aluminum hollow section of
50x50mm size 1.5mm thick of JINDAL/INDAL
confirming to ISI 303 standard as internal frame
structure placed horizontally & vertically in 600 x
600mm interval, except skirting member which shall
have 2x50x50mm members at reqd. Spacing and
6mm wide grooves or as required as per architectural
drawing. The framing shall be fixed with 12mm thick
MDF grade ply of approved make firmly screwed to
the aluminum frame on either side. The exposed
surface to be pasted with 1.0mm thick laminate of
approved pattern, make & colour. Items include
providing and fixing 12mm thick toughened etched
glass in side partitions of public counters complete
with beveling of size 1.5" on free standing glass in low
Height Partitions as persteem beech wood moulding
on free end of Low Height partition, 12x12mm steam
beech wood requirement, making grooves providing
65x31mm beading. Item also includes providing and
fixing 100mm wide skirting of 1mm thickness. Metallic
Laminate as per approved sample on exposed
partition surface as per architectural drawings cost to
include cost of silicon filling ,providing and applying
melamine finish on wood surface/grooves including
providing and applying 2-3 coats of VIPER over a coat
of anti-termite paint where ever required. complete to
the satisfaction of Architect / Bank's Engineer. cost to
include high gloss or texture laminate as per approved
sample.
1.3 Door with Fixed Glazing
Providing and fixing 12mm thick, toughened glass,
etched Door, inclusive of Providing and fixing 12mm
thick toughened, fixed, side glazing panels with
etching same as Door and with frameless fittings of
DORMA make, with following parts, viz:SM1040
forever/side panels 1O41 connector for side/upper
panel, SM 1020 upper patch, SM 1010 bottom patches
1049 E floor lock, SM 1052 strike plate BTS 84, floor
spring including Providing and fixing of DORMA make
handles TG 9159 EQ-S as per approved design,
grinding & polishing smooth of glass edge with
cutting& making good the floor wherever required etc
complete to the satisfaction of Architect/ Bank's
Engineer.
1.2.1 17000.00 Set Toughened Glass Door all accessories as required 4.00 4.00 68000.00 68000.00
only.(Two main door, one Manager Cabin and E-
Lobby)
1.2.2 3200.00 SQM Fixed Glazing (Front of E-Lobby) 10.00 9.80 32000.00 31374.40
1.2.3 3450.00 SQM Providing and fixing 12mm thick, vertical toughened 6.00 0.00 20700.00 0.00 Not Executed
glass partition in between machine, in E-lobby as per as per
drawing. Item to include all necessary fixtures directions
complete.
Page 2 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
6200.00 SQM Providing and fixing non decorative type Flush Door 11.00 10.77 68200.00 66763.46
Shutters 35mm thick with core of block board
construction with frame of first class hardwood, well
matched commercial 3ply veneering, vertical grains or
cross bands, face veneers on both faces of shutters
inclusive of providing and fixing lipping with second
class steam beech wood battens of 25mm minimum
depth on all edges of shutter, finished with 1.0mm
thick laminate on both sides. Item includes providing
and fixing 5mm thick etched glass as per approved
design steam beech wood frame 62.5x150mm &
40x65mm beadings 12x12mm.Providing and fixing 4
Nos. lacquered brass hinges 100mm & handles &
necessary hardware Item also includes providing and
fixing 150mm lacquered brass tower bolt, door closer
(without cover plate), brass door stopper, all wood
surface polished with melamine finish as per
architectural drawings Rate shall include providing and
fixing M.S flat iron 37x3mmx38mm long hold fast (8
Nos. minimum)screwed to frames embedded in
cement concrete 1:3:6 mix (1cement:3coarse sand: 6
hard stone aggregate in wall as per requirement and
to the satisfaction of Architect/ Bank's Engineer
Note: Area of door will be measured for payment.
2 PANELLING
2.1 2200.00 SQM Providing and fixing Wall Paneling consisting of 2 20.00 99.51 44000.00 218925.52
x1"18 gauge section placed at 2'-0x2'-0" horizontally
and vertically with Unannodised Aluminum size 1.5mm
thick of JINDAL/INDAL confirming to ISI 303 standard
as internal frame structure (as per site requirement)
framework. The framing shall be fixed with 8mm
thick MDF grade ply of approved make firmly screwed
to the aluminum frame on either side finished with
1mm thick (high gloss or texture) laminate as per
approved sample. Item includes providing and fixing
12x12mm steam beech wood beading making 6mm
grooves complete with polish & melamine spray finish
on wood surface/grooves as per architectural drawings
finished with 1mm thick laminate. Item includes
providing and fixing 100mm wide skirting of 1mm thick
metallic laminate as per approved sample.
STORAGES
7500.00 SQM Providing and erecting storage made up of 18mm thk. 12.00 19.52 90000.00 146391.00
Marine ply, with shutters, Finished in 1 mm thk.
Laminate from inside and outside(as approved). edges
will be melamine machine Polished. All the necessary
fittings such as brass hinges, magnet ball catch, tower
bolts, chair for shutters, locking arrangements,
handles are to be provided for each cupboard and to
be completed as per drawing.
Page 3 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
3.1 13800.00 RM Providing and fixing 750mm deep Public Counter 4.00 6.51 55200.00 89838.00
fabricated out of 19mm.Thick commercial board
finished with1.0mm thick High gloss laminate or duco
finish with high gloss PU coating as per approved
sample on all exposed surfaces, including top, front of
drawers & sides etc. All exposed internal and external
surfaces leg & CPU space, foot rest, steel Key board,
drawer area, to be finished with 1.0mm thick laminate
except top of counter and front which will be finished
with Acrylic top i.e. 12mm thick CORIAN with inlay of
different colour with 75mm Straight edging or full
round edging on both sides ( except joint of cabinet)
complete with edge polish, transaction counter
fabricated out of 12mm thick toughened Etched glass
in front (acid wash )500mm wide & fixed at 900mm
height with stainless steel studs as per approved
sample and as per architectural drawings. Front glass
panel shall be 1'-6" high and shall be fixed between
transaction counter & public counter. The rate shall
include providing and fixing 0.8mm thick laminate fixed
over on all visible invisible internal surfaces of
shutters, drawers, internal side of back ply, both sides
of vertical &horizontal members with teak wood
moulding/teak wood edging, 2mm thick edge binding
tape fixed with adhesive on edges of commercial
board /ply as required,100mm wide Skirting with
necessary and beech wood moulding with high gloss
PU coating, hardware handles as per approved
sample, auto closing hinges for shutters as per
3.3 Server Counter/Clearing Counter
10950.00 RM P/S 600mm deep Running Counter in system room 5.00 5.00 54750.00 54750.00
fabricated out of19mm. comm. board finished with
1.0mm th. Laminate as per appd. Sample on all
exposed surfaces/c top, front of drawers, sides etc. &
all exposed internal and external surfaces, foot rest &
CPU space, foot rest, Hettich Key Board and drawers
as required to be finished with 1.0mm thk. laminate
complete The rate shall include P/F 0.8mm thk
laminate fixed over on all internal surfaces (visible &
invisible) of drawers & internal side of back ply, side
and both sides of vertical, horizontal members with
teak wood moulding /teak wood edging and 2mm thk
edge binding tape fixed with adhesive on edges of
commercial board/ply as required,100mm wide
metallic Skirting (100mm) with necessary hardware
such as auto closing Hinges for drawers, Telescopic
sliding channel, Locks, handles etc as per appd.
sample and p/f stainless steel cable manager.
TABLES
Page 4 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
3.5.1 MANAGER TABLE: Providing and fixing in position
Branch Manager's Table fabricated out of 19mm
commercial board with all exposed surfaces, leg space
area, CPU area to be finished with 1mm thick high
gloss or texture laminate, table top finished with
1.5mm thick high gloss or texture laminate with wood
moulding, 12mm thick etched plate glass complete.
Item includes providing and fixing drawers, shelves,
shutters, 100mm wide skirting of metallic decorative
laminate12mm thk toughened glass in modesty panel
as per approved sample, steam beech beading with
high gloss PU coating or Duco with high gloss PU
coating as per architectural drawings. Item includes
providing and fixing necessary hardware, locks,
locking arrangement, telescopic steel channel runner
for drawers, key board drawer, handles, foot rest, as
per approved sample, polishing the exposed steam
beech wood surface with high gloss PU coating. Item
includes providing and fixing 0.8mm thick laminate
fixed over on all visible & invisible internal surfaces of
shutters, drawers, internal side. Providing and fixing
stainless steel cable manager inclusive of cutting &
making hole and making good the surface
etc.complete to the satisfaction of Architect/Bank's
Engineer.
3.5.1.1 24000.00 Nos. Table Size :1800x750x750mm (6'-0"x3'-0"x2'-6"). 1.00 1.00 24000.00 24000.00
3.5.2 OFFICER TABLE: Providing and fixing in position
Officer Table fabricated out of 19mm comm. board with
all exposed surfaces inclusive of leg space area &
CPU area to be finished with 1mm thk. high gloss or
texture Laminate & table top finished with 1.5mm th
high gloss or texture laminate with 31x31mm Steam
Beech wood moulding with high gloss PU coating or
duco paint high gloss PU coating complete & inclusive
of P/f with drawers, shelves, shutter & 100mm wide
skirting of metallic decorative laminate metallic
laminate and 8mm toughened glass in modesty panel
as/arch drg. As per appd. sample 12x12mm steam
beech beading & as/arch drg. Item includes providing
and fixing necessary hardware, locks, locking
arrangement, telescopic steel channel runner for
drawers, key board drawer, handles, foot rest, as per
approved sample, polishing the exposed steam beech
wood surface with melamine spray finish. Item
includes providing and fixing 0.8mm thick laminate
fixed over on all visible & invisible internal surfaces of
shutters, drawers, internal side. Providing and fixing
stainless steel cable manager inclusive of cutting &
making hole and making good the surface
etc.complete to the satisfaction of Architect/Bank's
Engineer.
3.5.2.1 18000.00 Nos. Table Size :1500x750x750mm (5'-0"x2'-6"x2'-6"). 4.00 4.00 72000.00 72000.00
SIDE CABINETS
Page 5 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
Providing & fixing in position Side Cabinets having
side partition drawers, shelves, shutters fabricated out
of 19mm thick commercial board with 6mm thick
commercial ply wood backing, all exposed surfaces,
side & front finished with 1mm thick laminate, top with
Acrylic top i.e. 12mm thick WHITE CORIAN with
75mm Straight edging or full round edging on both
sides as per approved sample complete colour with
shelves, drawers, shutters,100mm wide decorative
metallic laminate skirting as per approved sample.
Item includes providing and fixing necessary
hardware, hinges, locking arrangement with lock,
telescopic steel channel runners, handles, stainless
steel wire manager as per approved sample. Providing
and fixing 0.8mm thick laminate fixed over on all
visible & invisible internal surfaces of shutters, drawers
internal side of back ply, side and both sides of
vertical, horizontal members with teak wood
moulding/teakwood edging and 2mm thick edge
binding tape fixed with adhesive on edges of
commercial board/ply as required etc. complete to the
satisfaction of Architect/Bank's Engineer.
3.6.1 11500.00 SQM Cabinet Size : 900X450X750mm (3'0"X1'4"X2'6"). 3.50 2.25 40250.00 25875.00
4 STORAGES
4.1 Providing and fixing in position Storage Cabinets
having sides partitions, shelves& shutters, fabricated
out of 19mm commercial board, 6mm thick
commercial plywood back, with all exposed surfaces
finished with 1mm thick high gloss or texture laminate
Providing and fixing decorative metallic laminate
skirting as per architectural drawings. Item includes
teak wood moulding/ teakwood edging and 50mm thk
teak beading fixed on edges on edges of comm.
board on top as per drg with pu polish as per
architectural drawings. The rate shall include providing
and fixing 0.8mm thick laminate fixed over on all
visible & invisible internal surfaces of shutter, drawers
& internal side of back ply side and both sides of
vertical & horizontal members with 2mm thick edge
binding tape fixed with adhesive on edges of
commercial board/ply as required. Item also includes
providing and fixing necessary hardware, stainless
steel auto closing hinges as per approved sample,
handles as per approved sample, locking
arrangement,75mm brass tower bolts, locks,
telescopic channels for drawers as per site
requirement etc. complete to the satisfaction of
Architect/ Bank's Engineer.
4.1.1 8000.00 SQM 450mm deep Storage Cabinet. 12.00 5.95 96000.00 47580.00
4.2 LOUVERED SHUTTER ( ELECTRICAL PANEL
BOX)
Page 6 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
5000.00 SQM Providing and fixing Cabinet for Main Panel Board 5.00 2.21 25000.00 11030.00
fabricated out of 19mm thick Bison Board finished with
1.0 mm thick laminate on exposed side surfaces. Front
shutters to have stainless steel of aluminum powder
coated louvers and 2mm thk edge binding tape with
all other specifications as per item no. 4.1above etc.
complete to the satisfaction of Architect/ Bank's
Engineer. All shutters shall have SS steel Louver panel
size 300mmx450mm for air circulation The rate shall
include providing and fixing 0.8mm thick laminate fixed
over on all visible & invisible internal surfaces of
shutter and both sides of vertical & horizontal
members.
Page 7 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
SOFA
6.1 Providing & placing in position 760mm deep and
860mm high Sofa having stainless steel frame,
chrome plated legs literate tapestry Geeken make:
Chicago Series
6.1.1 12000.00 Nos. LENGTH 1300, DEPTH 760 & HEIGHT 860 : TWO 7.00 7.00 84000.00 84000.00
SEATER SOFA
CHAIRS
Providing and placing in position Chairs with chrome
plated base 5nos castors, tilting & push back
arrangement, multiple locking gas lift & net upholstery
of (FEATHER LITE MAKE: CHROME FLEX)
6.2.1 10000.00 Nos. BRANCH MANAGER CHAIR CA CB HB MARK-1 1.00 1.00 10000.00 10000.00
6.2.2 9000.00 Nos. STAFF WITH ARMS CHAIR CA CB MB MARK-2 8.00 8.00 72000.00 72000.00
6.2.3 8000.00 Nos. VISTOR CHAIR CB VISITOR (4 LEG BASE) 17.00 17.00 136000.00 136000.00
6.3 1500.00 Smt. Providing and laying 10mm thick Glass with beveling 4.50 6.87 6750.00 10305.00
all around on tables
SUB HEAD : VII: MISCELLANEOUS
7.1 2000.00 Nos. Providing and laying imported Rubber Door Mats of 1.00 1.00 2000.00 2000.00
approved shade. Size:2400X1200mm as per the
selection of Architect/ Bank's Engineer.
7.3 1200.00 Smt. Providing and fixing Roller Blinds/Multi Roller Blinds of 2.00 0.00 2400.00 0.00 Not Executed
Elite series PVC range of fabrics. (Panama 5% or10% as per
as approved as per sample). The blind will be of directions
approved colour and shade as per the selection of
Architect/ Bank's Engineer.
7.4 2500.00 Nos. Providing and placing display Painting/Artifacts of 10.00 3.00 25000.00 7500.00
basic cost Rs. 2000/- as per the selection/choice of
Architect/Bank's Engineer.
7.5 800.00 Nos. Supplying and placing in position Perforated Stainless 5.00 5.00 4000.00 4000.00
steel Dustbins 250mm long as per approval and
selection of Architect/ Bank's Engineer.
7.6 1800.00 Nos. Supplying and placing in position Stainless Steel 5.00 5.00 9000.00 9000.00
Planters made of 304 grade stainless steel with
brushed finish as per approval and selection of
Architect/Bank's Engineer.
7.70 1800.00 Smt. Providing and fixing Shutter Boxing for rolling shutter 6.00 0.00 10800.00 0.00 Not Executed
made of 19mm thick commercial board including as per
hinged cover as per design and as per instructions of directions
Architect/Bank's Engineer.
7.80 3000.00 Smt. Providing and fixing in position Aluminum composite 20.00 49.78 60000.00 149338.77
paneling with PVDF coating & LDPE core laminated
Eurobond/Alto bond/Alukabond Exterior Grade 4mm
thick with composite of (0.5mm-3mm-0.5mm) including
fabrication for the same with aluminum sections,
required hardware, silicon sealant (Dow Corning 789)
masking tape, necessary scaffolding etc. as detailed in
drawing complete in all respects.
7.90 2500.00 Smt. Providing and applying wall paper of approved design 3.00 11.66 7500.00 29160.00
and shade and colour over 1 coat of POP 12mm thick
to prepare base for fixing the wall paper as per
direction of the Architect. The job is inclusive of
scraping, leveling and preparing the surface, etc.
(Basic cost of wall paper Rs180 per sq ft)
Page 8 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
7.10 1000.00 Smt. Providing and applying TEXTURE Paint Luster finish 10.00 50.62 10000.00 50618.50
of Arco Paints/Berger finish of approved shade on
walls, partitions etc. as per the instructions of
Architect/ Bank's Engineer.
7.11 150.00 Smt. Providing and applying two or more coats of Oil Bound 250.00 293.26 37500.00 43989.12
Distemper over walls & ceiling after preparing the
surface with a coat of primer & 6mm thick POP etc.
complete as per the instructions of Architect/Bank's
Engineer.
7.12 100.00 Smt. Providing and applying 2 coats of Synthetic Enamel 10.00 23.98 1000.00 2398.00
Paint of approved shade over 1 coat of primer as per
the instructions of the Architect/Bank's Engineer.
7.13 3150.00 Smt. Providing and fixing black granite for door frame with 16.00 0.00 50400.00 0.00 Not Executed
edges will be polished. as per
directions
7.14 650.00 Smt. Half brick work masonry with common burnt clay F.P.S. 30.00 36.33 19500.00 23614.50
(non modular) brick of class designation 7.5 in
superstructure above plinth level up (Fire proof
specifications) cement mortar 1:4 (1 cement: 4 coarse
sand)
7.15 180.00 Smt. Providing and applying 20mm thick internal plaster 60.00 75.73 10800.00 13630.95
with neeru finish at all heights and locations in cement
mortar specified below in two coats for masonry
(except stone masonry) and concrete surface
including racking out joints hacking of concrete
surfaces watering finishing, curing scaffolding etc as
directed by Engineer in charge in cement mortar 1:4.
a. 1100.00 Point Point Wiring as above for one light point controlled 50.00 49.00 55000.00 53900.00
by 6A switch.
b. 1150.00 Point Point Wiring as above for wall fan point with 1x5A 15.00 13.00 17250.00 14950.00
socket outlet.
c. 1100.00 Point Point Wiring as above for exhaust fan point with 5.00 2.00 5500.00 2200.00
connector & controlled by 6A switch.
f. 1150.00 Point Point Wiring as above for two light points controlled by 5.00 0.00 5750.00 0.00
a 6A switch.
g. 950.00 Point Point Wiring as above for Glow sign board with 2.00 2.00 1900.00 1900.00
2x2.5sqmm PVC insulated copper conductor wire with
1.5sqmm for earthing in appropriate MS conduit
Page 9 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
h. 1050.00 Point Point Wiring as above for call bell point with bell push 1.00 1.00 1050.00 1050.00
incl Anchor make bell.
i. Supplying and fixing of 16Amp switch socket 5/6 pin
power points with specifications as above but with
2x4.0sq mm PVC insulated copper conductor and
1x2.5sq mm earth wire for 1st point and 3x2.5sq mm
loop from the 1st point including 6pin (6/16Amp)
socket and 16Amp Switch. (max 2 point per circuit).
2000.00 Nos b) Supplying and laying of 4X6 Sq.mm PVC insulated 4.00 0.00 8000.00 0.00
1100V grade FRLS wires in MS Conduit for 3-phase
Cassette type ACs from DB to AC out door unit and
single phase power supply with 3X2.5 Sq.mm PVC
insulated, 1100 V grade Copper conductor FRLS wires
with 3 pin modular type socket including plug top
(2P+E 25Amp), 1 SPMCB (C Series) 16Amps and one
32Amp TPN MCB with 4-Way SPN DB Double door
type for 3 Phase power supply at designated place.
(Wiring for A/C From DB to Point control box)
LIGHTING FIXTURES
Page 10 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
1 Supplying, Installation & commissioning of following
type recessed/surface mounted fluorescent light fixture
complete with electronic choke earthing point and with
TL / LED lamps complete as required.(LED Lamp shall
have 3 Years Replacement Guaranty)
a 12000.00 Each 8-Way SPN DB with 1-40 amp. DP 10 kA MCB 1.00 4.00 12000.00 48000.00
incoming and 6nos. 10 amps. SP 10 kA 'C' category
MCB with thermal magnetic protective releases out
goings.
b 10000.00 Each 6-Way TPN DB with 1-40 amp. 4P ELCB 300 mA 1.00 2.00 10000.00 20000.00
sensitivity incoming and 12 nos. 10/16/25 amps. SP 10
kA 'C' category MCB with thermal magnetic protective
releases out goings.(LDB/PDB)
c 8500.00 Set 4-Way TPN DB with 63A-TPN MCB -1no and 25A-DP 1.00 1.00 8500.00 8500.00
MCB- 2 nos (AC etc), 2Nos 63 Amp DP MCB (for UPS
I/P), 4nos, 10 Amp SPMCB "C"Curve
d 20000.00 Set 4-Way TPN DB with 1-63 amp. 4P ELCB 300 mA 0.00 0.00 0.00 0.00
incoming and 12 nos. 25-32 amps. SP10 kA 'C'
category MCB with thermal magnetic protective
releases out goings.(PDB)
e 12000.00 Set 6-Way VTPN DB with 100 amp. 4P 25 kA MCCB 1.00 1.00 12000.00 12000.00
incoming and 4 nos. 32 amps. 4P 25 kA 'MCCB'
2 (ACDB)
Supplying erection,testing & commissioning of cubical
type sheet steel clad floor /wall mounted totally
enclosed LT switch board suitable with ISMC channel
as required of use on 415 V 3 phase 4 wire 50 cycles
complete housed with incoming and outgoing, bus bar
including interconnection accessories, earth bus along
the width of panel etc.complete as required and with
following incoming and outgoing switchgear as per
specifications and drawings.
Page 11 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
INCOMING
125A 4P MCCB 35Ka with thermal magnetic release
with E/F,S/C protections -1 No.
125Amp 4 Pole on load Change Over. 1No. (only
provision)
1 Set of Multifunction meter (96x96 mm) for
V/A/PF/Hz/KVAH /KWH with LCD /LED Display as per
IS 14697
3 Nos.100/5A ratio CTs
3 Nos R-Y -B phase LED type indicators
BUS BAR
200A,50 Hz, three phase and neutral Aluminum bus
bar having a current density of not less than 1.0 Amp
sq.mm and the neutral bus of 50% capacity
interconnections between bus bars.
OUTGOINGS
63A 4P MCCB 16K - 02Nos.(For System & eLobby)
65000.00 Set 100A 4PMCCB 1No (For VTPN) 1.00 1.00 65000.00 65000.00
63A 4P MCB 16KA- 02Nos. (Individual Separate
Compartment)
40 4P MCB 16KA - 02Nos.(Individual Separate
compartment)
3 APFC PANEL
Supplying, erection and commissioning of the
following integrated cubical type indoor automatic
switching "ON" and "OFF" control panel with dust
vermin proof lined lockable doors complete with
interconnection stepped relays contractors Push
button and CTS complete with a capacitor bank as per
specification (suitable for 400/440V 3 phase 50 C/S
supply system) as required (20 KVAR capacitor Panel)
INCOMING
63A 4P MCB (10 KA) -1 No.
Phase indication lamps each backed up with 5A unit to
indicate that the unit is "ON"- 4 Set
05/03/02/01 KVAR - 4 Nos.
0-500V Voltmeter with 3 way and off selector switch
0-100V Ammeter with 3 way and off selector switch
100/5A CTS Ratio -1 Set.
APFC Relay in steps with Indicating meter -1Set.
OUTGOING
20A MCB with contractor to each 05 KVAR capacitor
-1 No.
32A MCB with contactor to each 10 KVAR capacitor
-1 Noto each 01/02 KVAR capacitor
16A MCB with contactor
-3 Nos
Push button stations"RED"and"GREEN"push button
for manual operation of contractor-4 Set
Automatic switching "ON" and "OFF" control 5 steps
APFC Meter-1nos
35000.00 Set 10 KVAR capacitor bank -01 Nos. 1.00 1.00 35000.00 35000.00
05 KVAR capacitor bank -01 Nos.
02 KVAR capacitor bank -02 Nos.
01 KVAR capacitor bank -01 Nos.
Page 12 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
4 Supply, installation, testing and commissioning 1.1KV
Grenade LT power cable with solid/stranded Aluminum
conductor XLPE insulated, colour coded laid up PVC
inner sheathed, and overallST-2 grade PVC sheathed
confirming to IS :7098 (part-1)& ISI marked as
required of the following sizes.
200.00 Metera) 3.5Cx35sq.mm Aluminum Armoured with 2x12 25.00 6.00 5000.00 1200.00
SWG GI wire
300.00 Meterb) 4Cx10sq.mm Aluminum Armoured with 2x12 SWG 30.00 202.00 9000.00 60600.00
GI wire
325.00 Meterc) 4CX16Sq.mm Aluminum Armourd cable with 2X 12 20.00 43.00 6500.00 13975.00
SWG GI wire
5 Supplying and making end termination with
compression glands including providing and crimping
with solder less lugs / ferrules for PVC insulated PVC
sheathed Aluminum conductor cable of 1.1 KV grads
as required .
300.00 Each 3.5cx35 sq.mm Armoured cable 2.00 4.00 600.00 1200.00
450.00 Each 4Cx10 sq.mm AL Armoured cable 6.00 12.00 2700.00 5400.00
550.00 Each 4Cx16sq.mm Armoured cable 2.00 4.00 1100.00 2200.00
EARTHING
1 19500.00 Set i)Supply and installation of pipe-in - pipe technology 2.00 2.00 39000.00 39000.00
ASHLOK or approved make by bank Earthing System,
Model T-39 with outer diameter of 80mm, length
2000mm embedded in the soil with masonry
inspection pit along with cover etc. Complete in all
respect. Earth pit installation test certificate to be
submitted after measurement of earth resistance as
per the provision in IS3043.( UPS connection)
2 17500.00 Set ii) Supply and installation of pipe-pipe technology QRO 0.00 0.00 0.00
ASHLOK or approved make by bank Earthing system,
Model T-19 with outer diameter of 50mm, length
2000mm embedded in the soil with masonry
inspection pit along with cover etc. complete in all
respect. Each pit installation test certificate to be
submitted after measurement of earth resistance as
per the provision in IS3043. (Panel earthing)
3 150.00 MeterProviding and laying copper strip 25 mm x 3 mm 15.00 0.00 2250.00 0.00
insulated by heat pressurized heavy gauge PVC
sleeve, duly jointed by full lap brazing and drawn
underground in 40mm class B GI pipe from the
inspection pit to the inside of the branch premises as
required.
4 680.00 MeterProviding and laying COPPER strip 25 mm x3 mm in 10.00 0.00 6800.00 0.00
recess for connection etc. as required.
5 45.00 MeterProviding and fixing 2X8 SWG copper wire in recess 25.00 30.00 1125.00 1350.00
or surface for loop earthing with sub-main conduit and
L.T. cable from panel to DB 's as required.
WIRING FOR IP BASE VOICE & DATA
1 Supply and fixing of openable top cover floor junction
boxes powder coated MS raceways junction boxes
made with 2mm thick sheet complete provided with
neoprene gasketted removable cover fixed on the
boxes by countersunk cadmium plated screws
including the cost of earth links at all joints to ensure
earth continuity complete as required.
650.00 Each 150x150mm wide x 40mm deep 15.00 0.00 9750.00 0.00
Page 13 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
3 Supply, Install, connect, test and commission the IP
based Telephony system including all accessories
complete in all aspects as required with following
components (Panasonic/Siemens)
2 95.00 MeterSupplying and drawing of PVC insulated copper 300.00 247.00 28500.00 23465.00
conductor cable of 2x1.5 sq.mm. in existing conduit as
required.
3 1500.00 Each Supplying, installation, testing and commissioning of 10.00 13.00 15000.00 19500.00
analogue photoelectric optical type Smoke detector
and mounting base with LED light complete as
required.
4 1550.00 Each Supplying, installation, testing and commissioning of 1.00 0.00 1550.00 0.00
analogue photoelectric optical type Heat detector and
mounting base with LED light complete as required.
Page 14 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
5 800.00 Nos Supplying, installation, testing and commissioning of 1.00 2.00 800.00 1600.00
duel tone electronic hooter suitable for wall mounted
electronic hooter for complete as required.
6 750.00 Nos Supplying, installation, testing and commissioning of 1.00 2.00 750.00 1500.00
manual call box in suitable enclosure with
arrangement to raise the alarm when the glass is
manually broken complete as required.
7 15000.00 Nos Supplying, installation, testing and commissioning of 1.00 1.00 15000.00 15000.00
microprocessor based intelligent analogue
addressable modular networkable single zone
extendable main fire alarm control panel with LCD
Display lights. The panels shall have 240 volts AC
power supply automatic Battery charger 24 Volts
sealed lead acid maintenance free batteries as
complete with batteries, battery charger illuminated
numeric diagram complete as required.
7 15000.00 Each Supplying and fixing of Biometric Door Access control 2.00 0.00 30000.00 0.00
system including wiring and connections complete in
all aspects as required.
8 800.00 Each Supplying & installation of Exit Switch 4.00 0.00 3200.00 0.00
9 3000.00 Each Supplying & installation of Electromagnetic Lock 2.00 0.00 6000.00 0.00
10 900.00 Each Supplying & installation of Power Supply for locks 2.00 0.00 1800.00 0.00
11 65.00 Each Supplying & laying UTP CAT 6 for Data and Voice 150.00 242.40 9750.00 15756.00
wiring in PVC conduit/Raceway complete as required.
12 100.00 RM Wiring for CERP Machine as required and as per 200.00 150.00 20000.00 15000.00
instruction of bank's Engg/Architect
13 40.00 RM Wiring for TV as required and as per instruction of 50.00 0.00 2000.00 0.00
bank's Engg/Architect
14 450.00 RM TV Socket/outlet with 2mm thick PVC Box 2.00 0.00 900.00 0.00
TOTAL 901645.00 912498.20
PART "C" AIR CONDITIONING WORK
1.0 90000.00 Nos Supply installation with proper having supports, 4.00 4.00 360000.00 360000.00
Testing and commissioning of Cassette Type 4.0TR
(Three phase) each comprising of an outdoor and a
indoor unit suitable for cooling as shown on the
drawings and as per the specifications. Enclosures
shall be factory fabricated and painted to a smooth
finish. Outdoor unit shall consist of hermetically
sealed/ semi- hermetic scroll/ rotary compressors.
6.0 3000.00 Nos Supplying, installation, testing and commissioning of 5.00 5.00 15000.00 15000.00
wall mounted type voltage stabilizers with three steps
relay equipped with TDR, (Make: BLUEBIRD/
LOGICSTATE/INLINE) input voltage range : 140-280v,
output : 230v
7.0 115.00 Rmt Supplying & fixing rigid pvc pipe 32/25mm outer dia 180.00 73.95 20700.00 8504.25
tolerance of +0.3mm and class 4 (8kg/Sqcm) pipe IS:
4985:2000 approved make with insulation. On wall
exposed or recess as case may be.
8.0 5000.00 Nos 24hrs Programmable AC timer (Switching 2HRS/ 2.00 2.00 10000.00 10000.00
4HRS Interval of Approved )
TOTAL 782700.00 755422.25
PART "D" EXTRA WORK
1 1200.00 Nos CPU Trolley 0.00 9.00 0.00 10800.00 Refer analysis
no 1
2 1800.00 Nos Mortise lock 0.00 7.00 0.00 12600.00 Refer analysis
no 2
3 2500.00 Nos Cost difference for wall paintings 0.00 3.00 0.00 7500.00 Refer analysis
no 3
4 1.00 Nos Auto dialer 0.00 7000.00 0.00 7000.00 Refer analysis
no 4
5 4500.00 P/F 4Way SPN D.B with 40Amp TPN MCB for 0.00 4.00 0.00 18000.00 Refer analysis
no 5
outdoor A.C unis.
6 24000.00 Nos P/F 125Amp MCCB in M.S Enclosure. 0.00 1.00 0.00 24000.00 Refer analysis
no 6
7 25000.00 Each P/F Inverter with Battery + Trolly. 0.00 1.00 0.00 25000.00 Refer analysis
no 7
8 150.00 Rmt Supplying and drawing 3S/L 2 Core Copper Wire 0.00 52.00 0.00 7800.00 Refer analysis
no 8
Flexible for Invertor.
9 120.00 Rmt Supplying and drawing 3Cx2.5Sqmm sizes of 0.00 270.00 0.00 32400.00 Refer analysis
no 9
XLPE/PVC insulated Copper conductor
unarmored cables of 1.1KV Grade in the existing
surface/recessed steel/PVC conduit as required.
TOTAL 0.00 145100.00
(I) TOTAL (Part A"+Part B"+Part C") 3460595.00 3572512.46
(II) Discount if Any 5.00% 173029.75 178625.62
TOTAL 3287565.25 3393886.84
(III) Further Discount 2.50% 86565.37 89364.93
TOTAL Quoted Amount 3200999.88 3304521.91
Page 16 Abstract
Tn Rate Unit Description of Item Qty Amount (Rs) Remarks
(Rs) Tender Actual Tender Actual
TOTAL Extra 0.00 145100.00
GRAND TOTAL 0.00 3449621.91
Page 17 Abstract
86565.25 0.026331112
Page 18 Abstract
MEASUREMENT SHEETS SBI QUTUB ENCLAVE, NEW DELHI
Tn Description Unit No L W H Total Remarks
PART "A" INTERIOR WORK
1.1 Partition
Blue with counter Sqm 1 3.29 1.30 4.27
With Office Table Sqm 3 1.91 1.07 6.13
Manager Cabin Sqm 2 3.15 2.70 17.01
Above Glass to hold glass wall Sqm 1 3.49 0.30 1.05
Behind Cash counter Sqm 1 1.32 2.70 3.56
Corridor Sqm 1 1.34 2.70 3.62
Deduction of Door Sqm 1 0.92 -2.29 -2.11
Total Sqm 33.54
1.2 Low Ht Partition with Glass
With Glass Sqm 5 1.84 1.30 11.96
End with Office Table Sqm 1 2.73 1.53 4.18
Total Sqm 16.14
1.2.1 Glass Door
Entrance Glass Door Nos 4 1.00 4.00
Total Nos 4.00
1.2.2 Fix Glazing
ATM Sqm 1 1.45 2.13 3.09
Manager Cabin Sqm 1 2.30 2.70 6.21
Sqm 1 0.55 0.92 0.51
Total Sqm 9.80
1.3 Flush Door
Corridor Sqm 1 0.92 2.21 2.03
Rooms Sqm 2 0.80 2.16 3.46
Sqm 1 0.95 2.16 2.05
Flap Door Sqm 1 0.76 1.07 0.81
Sqm 1 0.72 1.07 0.77
Under Staircase Sqm 1 0.95 1.73 1.64
Total Sqm 10.77
2.1 Wall Paneling
entrance Box Sqm 1 2.08 2.71 5.64
Deduction of Glass Door Sqm 1 1.52 -2.10 -3.19
Edge vertical Sqm 2 0.30 2.10 1.26
Edge horizontal Sqm 1 2.10 0.30 0.63
Edge at Front Sqm 1 0.27 2.71 0.73
Above DB Sqm 1 1.20 2.71 3.25
Deduction of Glass Door Sqm 1 1.10 -2.00 -2.20
LHS Boxing Sqm 1 0.90 2.70 2.43
Sqm 1 1.00 2.70 2.70
Sqm 1 1.00 2.70 2.70
Sqm 1 0.87 2.70 2.35
RHS Boxing Sqm 1 1.55 2.70 4.19
Sqm 2 0.45 2.70 2.43
Sqm 1 2.21 2.70 5.97
Behind Officer Work store Sqm 1 6.26 2.70 16.90
Behind Blue Counter Sqm 1 8.00 2.70 21.60
Ledges Sqm 4 1.21 0.10 0.48
Ledges Sqm 4 2.10 0.10 0.84
Behind cupboard wall Sqm 1 2.60 2.70 7.02
Center Column Sqm 4 0.79 2.70 8.53
Manager Room Sqm 1 3.23 2.70 8.72
Ledges Sqm 2 2.38 0.11 0.52
Sqm 2 1.22 0.11 0.27
Corner table Sqm 12 0.75 0.45 4.05
Sqm 3 0.75 0.75 1.69
Total Sqm 99.51
6 Storages
Behind Cash Counter Sqm 1 6.52 0.91 5.93
Blue Storage Sqm 1 2.45 2.70 6.62
Sqm 1 3.13 0.91 2.85
Sqm 1 1.50 0.91 1.37
Manager Room Back Sqm 1 3.03 0.91 2.76
Total Sqm 19.52
3.1 Counters/ Table / Work Stations
RM 1 6.51 6.51
Total RM 6.51
3.3 Server Counter/ Clearing Counter
RM 1 5.00 5.00
Total RM 5.00
3.4 Writing Counter
Nos 1 1.00 1.00
Total Nos 1.00
3.5.1 Manager Table
Nos 1 1.00 1.00
Total Nos 1.00
Tables
Officer Table Nos 4 1.00 4.00
Total Nos 4.00
Side Cabinets
Storage with Courian Sqm 4 0.75 0.75 2.25
Total Sqm 2.25
4.1.1 Storages
With glass above at 6' height Sqm 1 2.95 0.85 2.51
Steam Beach Sqm 4 0.91 0.75 2.73
Side Sqm 1 1.00 0.71 0.71
Total 5.95
4.2 Louvered Shutter
4.2
Sqm 1 1.10 2.00 2.21
Total Sqm 2.21
5.1 Armstrong Tile Ceiling
Hall Area Sqm 1 3.00 13.80 41.40
Sqm 1 3.00 14.40 43.20
Manager & ATM Sqm 2 3.60 2.67 19.22
Server Room Sqm 1 3.00 2.75 8.25
Total Sqm 112.07
5.2 Gypsum Board Ceiling
Hall Area Sqm 1 17.72 8.52 150.97
Sqm 1 5.16 1.57 8.10
Sqm 1 2.12 4.35 9.22
Electrical DB Room Sqm 1 1.00 1.45 1.45
Above staircase door Sqm 1 0.95 0.97 0.92
Front of Toilet Sqm 1 2.48 3.00 7.44
Sqm 1 1.36 1.00 1.36
Above Storage Sqm 1 2.95 0.60 1.77
Toilet Area Sqm 1 2.48 3.00 7.44
Sqm 1 1.36 1.00 1.36
Deduction of Grid Sqm 1 3.00 -13.80 -41.40
Verticals Sqm 2 3.00 0.10 0.60
Verticals Sqm 2 13.80 0.10 2.76
Sqm 1 3.00 -14.40 -43.20
Verticals Sqm 2 3.00 0.10 0.60
Verticals Sqm 2 14.40 0.10 2.88
Sqm 1 3.60 -2.67 -9.61
Verticals Sqm 2 3.60 0.10 0.72
Verticals Sqm 2 2.67 0.10 0.53
Total Sqm 103.92
6.1 Two Seater Sofa
Nos 7 1.00 7.00
Total Nos 7.00
6.2.1 Branch Manager Chair
Nos 1 1.00 1.00
Nos 1.00
6.2.2 Staff Chair
Nos 8 1.00 8.00
Total Nos 8.00
6.2.3 Visitors Chair
Nos 17 1.00 17.00
Total Nos 17.00
6.3 10mm Beveled Glass
BM Table Sqm 1 1.80 0.90 1.62
Sqm 1 1.50 0.50 0.75
Sqm 4 1.50 0.75 4.50
6.3