The Omron rotary encoder E6CP-AG5C 256P/R 5M has an absolute encoding method with 256 positions, uses gray code output, and has an NPN open collector output. It operates from 12-24VDC with a maximum current consumption of 70mA, and can handle rotation speeds up to 1000 rpm with a minimum mechanical life of 100 million rotations.
The Omron rotary encoder E6CP-AG5C 256P/R 5M has an absolute encoding method with 256 positions, uses gray code output, and has an NPN open collector output. It operates from 12-24VDC with a maximum current consumption of 70mA, and can handle rotation speeds up to 1000 rpm with a minimum mechanical life of 100 million rotations.
The Omron rotary encoder E6CP-AG5C 256P/R 5M has an absolute encoding method with 256 positions, uses gray code output, and has an NPN open collector output. It operates from 12-24VDC with a maximum current consumption of 70mA, and can handle rotation speeds up to 1000 rpm with a minimum mechanical life of 100 million rotations.
Power supply voltage 12 VDC -10% to 24 VDC +15% (ripple (p-p): 5% Max.) Current consumption 70mA DC Max. Current: approx. 8 A Inrush current Time: approx. 0.3 ms Resolution (Single turn type) 256 P/R (Code No. 0 to 255) 8 bit Output code Gray code Control output (Output type) NPN open collector output Control output (Load current) 16 mA Max. (sink current) Control output (Residual voltage) (DC) 0.4 V Max. (load current:at 16mA Max.) Logic Negative logic output Accuracy -1 to +1 DEG Max. Direction of rotation Output code incremented by clockwise rotation Starting positional point Not equipped Load power supply voltage 28 VDC Max. Max. response frequency 5 kHz Rise time of output: 1 us Max. (Output voltage: 16V, load resistance: 1k OHM, cable length: 2m Max.) Rise and fall times of output Fall time of output: 1 us Max. (Output voltage: 16V, load resistance: 1k OHM, cable length: 2m Max.) Starting torque Room temperature: 0.98 mN.m Max. Moment of inertia 1*10-6kg.m2 Max. Radial: 30 N Shaft loading Thrust: 20 N Max. permissible rotation 1000 r/min Mechanical life expectancy 100 million rotations Min. Operating: -10 to 55 CEL Ambient temperature Storage: -25 to 85 CEL (with no icing or condensation) Operating: 35 to 85 %RH Ambient humidity Storage: 35 to 85 %RH (with no condensation) Insulation resistance 20 M OHM Min. at 500 VDC between charged parts and the case Dielectric strength 500 VAC at 50/60 Hz for 1 minute between charged parts and the case 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z Vibration resistance directions Shock resistance 1000m/s2 for 3 times each in X, Y, and Z directions Degree of protection IEC60529: IP50 EMI: EN50081-2 Applicable standard (EC Directive Emission Enclosure: EN55011 Group 1 classA (EMC Directive)) Emission AC mains: EN55011 Group 1 classA Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Not equipped Connection method Pre-wired models (Cable length: 5 m) Material (case) ABS Material (body) PPS Material (shaft) SUS416 Material (mounting bracket) Iron zinc plating Tightening torque 1.76 N.m Max. (with M4 screw) Accessories Instruction manual, servo mouting bracket and coupling