Professional Documents
Culture Documents
2
↑ Stone dryer
Expertise
↘
Abraservice is more than a special steels
supplier: for many years we have worked
together with our customers for all
project requirements.
4 ↘
From material to finished parts
— Wear Resistant Bevelled Cutting Edges: — We offer technical advice based on a wealth
Abraservice UK supply hot rolled wear resistant of experience enabling us to produce finished parts
steel edges in a range of hardness from 250 HB fit for purpose. Our services include:
to 500 HB. These can be supplied with either a
single or double bevelled edge from a selection •• CAD/CAM design via SolidWorks software.
of standard sizes cut to length and with holes if •• High-definition plasma and oxy-gas profiling
needed. These products are hot rolled to dimension •• Laser profiling
and then heat treated, and have a through •• Bevelling
hardness as specified, with no heat affected •• Drilling and countersinking
zone around the perimeter as with plasma or oxy •• Rolling and forming
gas profiled wear edges. This gives the finished •• CNC Machining
product a much longer wear life. •• Grinding
•• Perforating
— Cutting edges made to measure: •• Welded fabrications
Abraservice UK also manufacture fully finished •• Shot blasting and painting
cutting edges to customer requirements up to
140 mm thick, produced from a selection of high
wear, impact & heat resistant alloy steels.
5 ↘
A wide range of products
Alternative solutions
creusabro ® DUAL℗, creusabro ® 8000 ℗, creusabro ® 4800 ℗
Exceptional resistance to severe combined abrasion types, abrasion with impact,
abrasion with elevated temperature, abrasion and corrosion.
ABRASION
creusabro ® DUAL℗ 8 - 50 2 000 x 6 000 An innovative grade with very high performance taking its inspiration from the chemistry of
2 500 x 8 000 creusabro ® 8000 ℗ and being re-inforced with titanium carbides. The ultimate solution
for severe sliding abrasion combined with great impact. For applications where conventional
water quenched steels (500 HB, 550 HB), hardfacing plates or hard-casting parts are traditionally
implemented. 450 - 520 HB. Application: bucket liners for excavator, shovel, loader, dozer, cutting edges,
truck body liners, wear parts for primary and secondary crushers, vibratory feeder liners…
creusabro ® 8000 ℗ 5 - 60 2 000 x 6 000 creusabro ® 8000 ℗ is a wear resistant steel that combines extreme resistance to abrasion together with
2 500 x 8 000 a high level of toughness. The ability of this grade to work harden offers an increase of up to 45 % service life
compared to conventional 500 HB materials. 500 - 540 HB.
Application : cement plant, quarrying, mining & earth moving equipment, steel production, recycling plant…
creusabro ® 4800 ℗ 3-5 1 500 x 3 000 creusabro ® 4800 ℗ is a wear resistant steel that combines extreme resistance to abrasion together with
6 - 25 2 500 x 6 000 a high level of toughness. The ability of this grade to work harden offers an increase of up to 45% service
life compared to conventional 400 HB materials. It also works at higher temperatures than standard abrasion
steels, continuously at > 400 °C. 400 - 430 HB Application: block moulds, cement plants, quarrying,
mining & earth moving equipment, steel production, recycling plant…
ABRAMAX Mu 4 - 80 2 000 x 6 000 Steel with good abrasion resistance, improved processability,
2 500 x 6 000 heat resistance < 400 °C mechanical safeguards (use at room temperature), 270 - 350 HB.
Application: steel multi-purpose in all areas requiring proper attire to wear.
DILLIDUR 500V 10 - 50 2 000 x 6 000 A higher abrasion resistant water quenched plate than Dillidur 400 with a hardness of 500 HB and can
be readily welded and fabricated: 450 - 530 HB. Application: Earthmoving, excavator and loading equipment,
buckets and edges, dredgers, conveyors, knives and shears, skip liners, recycling equipment…
DILLIDUR 400V 10 - 60 1 500 x 3 000 A water quenched abrasion resistant plate with a hardness of 400 HB and can be readily welded and
2 000 x 6 000 fabricated. 370 - 430 HB. Application: Earthmoving and loading equipment, buckets and edges,
dredgers, conveyors, knives and shears, skip liners, recycling equipment, agricultural machinery…
DILLIDUR IMPACT 45 - 120 2 000 x 6 000 Dillidur Impact is a wear resistant steel with exceptionally high resistance to cracking. It has a nominal
hardness of approximately 340 HB in its delivered condition, and its outstanding mechanical properties are
obtained by water quenching and subsequent tempering. Dillidur Impact is successfully applied where high
resistance to abrasion is required together with very high toughness to resist impact wear: 310 - 370 HB.
Application: Earthmoving and loading machines, cutting edges, buckets, shovels, grabs, scoops,
breakers and knives…
Grades Thicknesses (mm) Formats (mm) Details
DURETAL 65 5+3 1 250 x 2 500 High chromium carbide weld overlay plate, which offers high resistance to sliding abrasion under moderate
DURETAL 35 6+4 1 500 x 3 000 impact conditions and temperatures between 450 and 650 °C.
8+5 2 000 x 3 000 58 - 62 HRC, ± 2 HRC.
10 + 9
ROC Mn / ABRO M 2-4 1 000 x 2 000 A carbon manganese (11 - 14 %), hyper-quenched austenitic, non-magnetic, work hardening steel plate.
5-6 2 000 x 6 000 Outstanding resistance to abrasion with frontal impacts or high compression.
8 - 25 2 500 x 6 000 550 - 600 HB (after hardening).
Application: impact and transfer plates (mines and quarries), liners (shot blasting cabinets),
lock mechanism protection for security doors …
ROC 500 / ABRO 500 6 - 80 2 500 x 8 000 Wear resistant water quenched grade, which can be readily welded and fabricated. 450 - 550 HB.
ROC 450 / ABRO 450 8 - 20 2 500 x 6 000 Wear resistant water quenched grade with an average hardness of 450 HB, which can be readily welded
and fabricated. Application: general use for any parts subjected to abrasion such as dump truck bodies,
mining and earthmoving machinery…
ROC 400 / ABRO 400 3-6 1 500 x 6 000 Wear resistant water quenched grade, which can be readily welded and fabricated. 370 - 430 HB.
8 - 120 2 500 x 6 000 Application: general use for any parts subjected to abrasion.
ROC 401 3-8 1 250 x 6 000 Abrasion-resistant steel from strip mill production. Excellent surface condition for a satisfactory
1 500 x 6 000 appearance after painting. 340 - 440 HB. Application: general use for any parts subjected to abrasion.
ROC 321 3 - 50 1 000 x 2 000 Wear resistant standard plate, suitable for welding.280 - 345 HB.
2 000 x 6 000 Application: production of components for mining and quarrying.
ROC 250 4 - 40 1 500 x 3 000 An economical wear resistant solution for simple cases of abrasion, good machinability.
2 000 x 6 000 200 - 260 HB. Application: general purpose grade for limited abrasion.
Abrasion corrosion
COBRANOX 35 4 - 20 2 000 x 6 000 Duplex stainless steel type, excellent corrosion resistance (equivalent to AISI 316)
X3 Cr Ni 23-4 EN 10088-2 and good abrasion resistance (equivalent steel hardness 300 HB. 260 HB.
WN° : 1. 4363 / 1.4463 Application: where abrasion and severe corrosion are combined.
ABRACORR 30 4 - 20 2 000 x 6 000 Normalized steel particularly suited for resistance to combined abrasion
& corrosion in wet environments. Abrasion resistance at temperatures up to 600 °C.
300 - 320 HB. Application: steel, cement, sugar, mining, fertilizer production.
COBRANOX 12 3 - 20 1 500 x 3 000 Ferritic stainless steel type. A technical and economic solution in the case of combined, limited abrasion
X2 Cr Ni 12 EN 10028 2 000 x 6 000 & corrosion. Good resistance to temperature < 500 °C and a good slip coefficient with good resistance
WN° : 1.4003 to clogging. 220 HB. Application: petrochemical, sugar refining, paper, mining and quarrying, agriculture…
DILLIMAX 1100 8 - 30 ≤ 2500 Steel with very high yield strength 1 100 MPa minimum.
Application: welded components in mechanical structures, winches, cranes, conveyors…
DILLIMAX 965 6 - 100 ≤ 2500 Steel with very high yield strength 965 MPa minimum.
EN 10025-6 Application: welded components in mechanical structures, winches, cranes, conveyors, bridges…
DILLIMAX 890 6 - 100 ≤ 2500 Steel with very high yield strength 890 MPa minimum.
EN 10025-6 Application: welded components in mechanical structures, winches, cranes, conveyors, bridges…
DILLIMAX 690 10 - 120 2 000 x 6 000 High tensile steel 690 Mpa minimum.
EN 10025-6 Application: all structural elements requiring strength and good resistance to fatigue…
IMEX 960 (S 960 QL) On demand On demand Steel with very high yield strength 960 MPa.
EN 10025-6
IMEX 900 (S 890 QL) On demand On demand Steel with very high yield strength 890 MPa.
EN 10025-6
IMEX 701 (S 700 MC) 3 - 10 1 250 x 2 500 High tensile steel, thermo-mechanically rolled. Good cold formability and weldability.
EN 10149-2 1 500 x 3 000 Application: offers strength in the areas of automotive industry, lifting equipment, Construction…
1 500 x 6 000
IMEX 501 (S 500 MC) 3 - 12 1 500 x 3 000 High tensile steel, thermo-mechanically rolled.
EN 10149-2 Application: rails, sleepers, reinforcing elements…
NASPIPE 6 000 & 12 000 Ø 80 - 500 An induction heat treatment process produces a thick layer of 600 HB on the inner surface of the pipe
to provide NASPipe’s wear resistant properties. The outer surface hardness at 300 HB adds to NASPipe’s
toughness. Application: transportation of quarry product, coal slurry, pulverized fuel systems,
cement & wood chip conveyance…
6 ↘
The Abraservice brand in Europe
10
Birmingham B8 1BB
United Kingdom
T. +44 (0)121 326 3100
F. +44 (0)121 326 3105 companies
contact
16
—
www.abraservice.co.uk
a.uk@abraservice.com
sales agencies
Graphic design : Superscript²
www.super-script.com
47 000 m2
of warehouses
300
people