You are on page 1of 14

10 11

Mountain biking is still relatively young. Most folks can still


remember riding rigid bikes on terrain that would be a challenge
on fully suspended rigs. The number of technology revolutions
in this sport over such a short span is quite astounding. However,
the introduction of suspension to mountain biking remains the
single most important.

Nothing links a rider to a bike more than suspension. It’s almost


as important as geometry and fit. The ability to tune a ride based
on personal preference and terrain is paramount to how a bike
performs. The problem is that for most riders, and even shop
wrenches, suspension is perceived as somewhat of a “Pandora’s
Box.”

While the ultimate objective of most suspension companies is


All new graphics for 2014! superior performance, often times more important standards can
MILO Compatible XC Trail AM FR DH DJ
While Manitou will always target su-
be overlooked.
MRD R7 MRD
Dorado PRO perior performance, we place equal emphasis on
Pro
Marvel Pro (26”, NEW 27.5, 29er)
R7 Pro
serviceability.
Minute Pro (26”, NEW 27.5, 29er)
NEW Dorado Expert Manitou forks are quite simply THE MOST EASILY serviced and
Marvel Expert (26”, NEW 27.5, 29er) tunable forks in the industry. Riders and wrenches that have ex-
Expert Circus perienced this over the past couple of seasons are now loyalists.
Expert
Minute Expert/TS (26”, NEW 27.5, 29er)
Marvel Comp/ LTD (26”, NEW 27.5, 29er)
Match Comp (26”, NEW 29er)
This is an open invitation to the evolution of
Comp
Circus
Comp
suspension.
Circus
Sport
Sport

12 13
TECHNOLOGY SPRING TECHNOLOGY
THRU AXLE: HEX LOCK QR15
Patented system provides superior torsional stiffness with a Hex Lock axle and possibly the
quickest install in the industry with 1/4 turn lock and tool free set-and-forget tension adjust.
U.S. Patent#8,113,594

1.5 TAPERED STEERER


Stiffer. Stronger. Lighter. The 1.5 Tapered steerer standard improves your bike’s
handling and responsiveness.

HEX-LOCK THRU AXLE


Our patented hex axle locks the lower legs in place, eliminating rotation around the axle. This
provides unsurpassed stiffness in a burly, no-gimmick 20mm axle system. U.S. Patent #6,412,803

MILO: MANITOU INTEGRATED REMOTE LOCKOUT


Manitou’s remote lock-out lever featuring separate thumb-operated lock and release
buttons. Its exceptionally narrow footprint allows riders to place it anywhere on the bar
without compromising access to shifters or brake levers. Light actuation and intuitive
button placement make it easy to operate in all riding conditions.

HOLLOW CROWN
Overall Fork Weight Reduction
Advanced Fork Design Application: Optimal System Stiffness to Yield
U.S. Patent #6,095,542 TPC TWIN PISTON CHAMBER DAMPER TECHNOLOGY

SEMI-BATH WITH EVIL GENIUS SEALS


Semi-Bath lubrication and Evil Genius seals have proven to dramatically increase the
durability and service life of our forks. High quality Evil Genius seals, originally
developed for motorcycle suspension, decrease stiction and keep fluids inside the
legs where they belong.

14 15
spring tech damper tech
DORADO AIR SPRING Absolute+ Absolute+ TPC+ AbsoluteTPC+
Velocity/Pressure Dependent System Dual Compression Piston
• Single air input on top of fork (Energy Dependent System)
• Large volume air spring for linear spring feel • Compatible with MILO remote
• Ultimate sensitivity for any rider, any condition lever • Velocity dependent needle
• Switches between velocity circuit responds to oil flow rate
dependent to pressure- through a low speed needle
MARS AIR dependent based on adjuster • Pressure Dependent high
Ultimate Plushness fro Trail position speed circuit responds to
• Achieves lockout feel at pressure against high speed,
• Used in Minute Pro and Marvel maximum adjuster position preloaded shim stack
• Highly adjustable to handle any rider preference • Plushness and control with • Bottom Out: Position dependent
and condition pedaling efficiency engages late in the travel for
• Simple user input charts on back of forks bottomless feel
• Custom ride kits available • Energy dependent secondary
• New air piston design improves service System Advantages piston engages the product of
• Adjustable on-the-fly Velocity x Displacement
TS AIR • Single-stage / lock out for
Light Weight for XC pedaling efficiency
• Low friction, low seal drag System Advantages
• Used in R7, Marvel Comp and Minute Expert TS • Handles abuse at any setting • Durability
• Easy set-up covers all rider weights • Traction
• Simple user input charts on back of forks • Comfort
• Control
ISO AIR

• Used in Marvel Pro and Marvel Expert


• New spring system combines the benefits of
MARS and TS Air
• Isolation system reduces vibration felt from high
frequency / low amplitude bumps
• New air piston design
• Easy setup and service

ACT AIR
Simple and Reliable

• Used in Minute Expert, and Marvel LTD


• Easy-to-use system is low maintenance and
forgiving
• Simple user input charts on back of forks
• Air pre-load adjustment
• Custom ride kits available
Bringing new technologies
COIL to market takes a lot of
Robust, Maintenance Free hard thinking. Director of
Engineering, Tim Abhold
• Used in Match Comp, Circus Comp, and Circus and Engineer John Thomas
Sport shown here. Who knows
• Externally adjustable pre-load (except Circus what they’ll come up with
Sport) next!
• Custom ride kits available

16 17
milo Manitou Integrated Lockout QR15 hexlock
Patented
U.S. Patent #8,113,595
Manitou’s evolutionary QR15 retains the patented HexLock
Thru-Axle design for superior torsional rigidity. The hex
axle prevents the drop-outs from rotating about the axle,
benefitting the rider with improved steering precision.
The QR15’s set-and-forget tension, with dial adjust, is
locked from the drive side.
MILO features an aluminum body, forged
aluminum lock lever and a nylon release • Tool Free
button. The narrow footprint allows for • Twist 90° clockwise and lock
multiple mounting options. Light actuation • Under 100 grams
and intuitive button placement make MILO • Aluminum shell, anodized w/
easy to operate in all riding conditions. laser etching
• Set it and forget it tension adjust

Weight 29.6 grams (Lever assembly)


Clamp Width 6.5mm
Cable / Housing 1.1mm / 5mm (Included)

18 19
dorado
From the North Shore of Vancouver, to the Utah Canyon lands to
the slopes of Whistler—this is the fork that all others aspire to.

Dorado Pro Dorado Expert (NEW)


Weight Lbs / Grams
6.55 / 2973.7 6.82 / 3096

Travel 180, 203 Internally Adj. (29’er 175mm) 180, 203 Internally Adj. (29’er 175mm)
Spring Air Air
Bottom Out Hydraulic and Rubber Bumper Hydraulic and Rubber Bumper
Steerer 1 1/8” Aluminum 1 1/8” Aluminum
Crown Forged Hollow-Oval Bore Forged Hollow-Bore
Crown Finish Black Ano Polished Matte Black Ano
Offset 49.55 49.55
Compression Damping TPC+ TPC+
Rebound Damping Adjustable TPC Adjustable TPC
Adjustments Air Air
Compression (High Speed and TPC+) Compression (High Speed and TPC+)
Rebound Rebound
Leg Diameter 36mm 36mm
Leg Material 7050 Aluminum Aluminum
Wheel Size 26 & 29 26 & 29
Brake Post Mount Post Mount
Axle 20mm Hex TA 20mm Hex TA
FEATURES Crown to Axle 567 / 591 567 / 591
and benefits
Colors Black Ano Black Ano

Dual-chamber air spring Options Short or Tall Crown (OEM) Short or Tall Crown (OEM)
Light weight, linear rate,
top-out resistant

TPC+ compression
Independently adjustable
high speed and TPC+
damping

Hexlock Axle
Lateral and torsional
rigidity

Hydraulic bottom-out
“Bottomless” feel

Hydraulic top-out
Smooth top-out

20 21
marvel
Manitou’s 32mm answer to the XC world. Marvel Pro Marvel Expert Marvel Comp Marvel LTD*
Awesome ride quality, durability and
Weight Lbs /
responsiveness 3.5/ 1589, 3.67/1666(Trail) 3.8/ 1725 3.96 / 1798 5.4/ 2452
Grams
Travel 80, 100 (Internally Adj), 120 80, 100 (Internally Adj),
80, 100, 120 80, 100 ,120
Available in 27.5 and 29” Spring ISO Air ISO Air
(26”-80, 100, 120,130)
TS Air
120
ACT Air
FEATURES Bottom Out Rubber Bumper Rubber Bumper Rubber Bumper Rubber Bumper
and benefits Steerer 1.5” Tapered 1.5” Tapered
1.5” Tapered 1.5” Tapered
1 1/8” Steel 1 1/8” Steel
1 1/8” Aluminum 1 1/8”Aluminum
Absolute+ damper 1 1/8”Aluminum 1 1/8”Aluminum
Externally adjustable low-speed damping Crown Forged Deep Bore Hollow Forged Deep Bore Hollow
Forged Hollow Crown Forged Hollow Crown
Internally tuneable high-speed damping Crown Crown
Compatible with MILO Crown Finish Color Matched Color Matched Shot Peen Black Ano Shot Peen Black Ano
Offset 26in 41mm 41mm 41mm 41mm
Casting
27.5 44mm 44mm 44mm 44mm
Optimized for increased tire clearance.
Reduced weight, increased stiffness and 29er 48mm, (optional 51mm) 48mm, (optional 51mm) 48mm, (optional 51mm) 48mm, (optional 51mm)
stregth Compression TPC Technology TPC Technology TPC Technology TPC Technology
Damping Absolute+ XC Stack Absolute+ XC Stack Absolute+ XC Stack Absolute+ XC Stack
Deep Bore Hollow Crown (Pro, Expert) Rebound Damping Cartridge TPC Adjustable Detented TPC Adjustable TPC Adjustable TPC
Lighter weight, no loss in strength
Adjustments Air Pressure Air Pressure Air Pressure Air Pressure
Compression to Lockout Compression to Lockout Compression to Lockout Compression to Lockout
Hollow Crown (Comp, LTD)
Rebound Rebound Rebound Rebound
Light and Strong
Leg Diameter 32mm 32mm 32mm 32mm
ISO Air Leg Material 7050 Butted AL 7050 Butted AL Straight Wall AL Straight Wall AL
New lightweight XC oriented spring system Wheel Size 26”, 27.5, 29er (NEW) 26”, 27.5, 29er (NEW) 26”, 27.5, 29er (NEW) 26”, 27.5, 29er (NEW)
uses vibration isolation technology to reduce
Brake Post Mount Post Mount Post Mount Post Mount
the effects of air seal drag
Axle 9mm, QR15 9mm, QR15 9mm, QR15 9mm, QR5
TS Air Crown to Axle
472 (1.5) 478 (1 1/8”) 472 (1.5) 478 (1 1/8”) 478 478
Light, simple, proven performance adapted (100mm) 26”
to Marvel Comp from little brother, the R7 27.5 494 494 494 494
Pro. Trickle-down technology 29 er
510 510 510 510
Colors White, Black, Custom Avail. White, Black, Custom Avail. White, Black, Custom Avail. White, Black
ACT Air
Reliable and widely tuneable spring system Options MILO Lock-Out MILO Lock-Out MILO Lock-Out MILO Lock-Out
for Marvel LTD QR15 , 51mm offset (29er), QR15 , 51mm offset (29er), QR15 , 51mm offset (29er), QR15, 51mm offset (29er),
Custom Tuning Custom Tuning Custom Tuning Custom Tuning
ALL NEW GRAPHICS FOR 2014! *OE Only

22 23
minute
Manitou’s 32mm Trail/ All Moutain fork tuned for Minute Pro Minute Expert/ TS*
longer travels and rougher conditions
Weight Lbs / Grams 4.1/1861 (80mm) w/Aluminum
3.44 / 1561.76
Steerer
Available in 27.5 and 29” Travel 26” 120, 140 120(TS), 130
FEATURES 27.5 120, 140 140
and benefits
29er
120,140 140
Absolute+ damper Spring MARS AIR ACT Air* or TS Air
Externally adjustable low-speed damping Bottom Out Rubber Bumper Rubber Bumper
Internally tuneable high-speed damping Steerer 1 1/8” Aluminum 1 1/8” Aluminum
Compatible with MILO 1.5 Taper 1.5 Taper
1 1/8” Steel*
Deep Bore Hollow Crown® Crown Forged Deep Bore Hollow Crown Forged Hollow Crown
Lighter weight, no loss in strength Crown Finish Color Matched Shot Peen Black
Offset 26” 41.27 41.27
Hollow Crown (Comp, LTD, Sport)
Light and strong 650B 44mm 44mm
29er
48mm,51mm(Optional) 48mm, 51mm(Optional)*
MARS Air Compression TPC Technology TPC Technology
Hybrid Coil-Air system reduces felt stiction and Damping ABS+ Trail Tuned Absolute+ XC Tuned
allows initial spring rate to be tuned for optimal Rebound Damping Adjustable TPC Adjustable TPC
handling, and final air ramp-up for bottoming
Adjustments Air, Compression to Lockout, Air, Compression to Lockout,
control. Incredible ride quality Rebound Rebound
Leg Diameter 32mm 32mm
TS Air
Leg Material 7050 Butted AL Straightwall AL
Proven air spring adapted from R7 reduces
weight of the Minute Expert by 137g Wheel Size 26, 27.5, 29 (NEW)
er
26, 27.5, 29er (NEW)
Brake Post Mount Post Mount
ACT Air Axle 9mm, QR15 9mm, QR15
Low maintenance coil spring with air Crown to Axle
pressure sag adjust 498 498
(120mm) 26”
27.5 516.5 516.5
ALL NEW GRAPHICS FOR 2014!
29 er
530 530
Colors Black or White Black or White
Options MILO Lock-Out, MILO Lock-Out
1.5” Tapered Steerer w/ Forged I- 1.5” Tapered Steerer w/ Forged
Beam Crown, I-Beam Crown,
ABS+ Tuning (Shim Stack), ABS+ Tuning (Shim Stack)
Spring Rate Spring Rate,
Color Match Crown
*OE Only

QR-15 Available

24 25
r seven
Lightest, most cost effective XC fork around. R7 MRD R7 Pro
Weight Lbs /
3.0 / 1362 (80mm) 3.38 / 1533 (80mm)
Grams
FEATURES
Travel 80,100 80,100
and benefits
Spring TS Air TS Air
Absolute+ damper (cartridge) (R7 MRD) Bottom Out Rubber Bumper Rubber Bumper
Light weight; Externally adjustable low speed
Steerer 1 1/8” Aluminum 1 1/8” Aluminum
to Lock-out damping
Crown Forged Deep Bore Hollow Forged Deep Bore Hollow
Internally tuneable high-speed damping Crown® Crown®
Compatible with MILO
Crown Finish Polished MRD Gray, White Color Matched
Absolute+ damper (R7 Pro) Offset 38.1 38.1
Externally adjustable low-speed to Lock-out
Compression TPC Technology TPC Technology
damping Damping Absolute+ (cartridge) Absolute+
Internally tuneable high-speed damping Rebound Damping Adjustable TPC (cartridge) Adjustable TPC
Compatible with MILO
Adjustments Air Air
TS Air Spring Compression to Lockout Compression to Lockout
Rebound Rebound
Progressive spring rate, light weight for XC
Leg Diameter 30mm 30mm
Deep Bore Hollow Crown (R7 MRD) Leg Material 7050 Butted AL 7050 Butted AL
Lighter weight, no loss in strength Wheel Size 26 26
Brake Post Mount Post Mount
ALL NEW GRAPHICS FOR 2014!
Axle 9mm 9mm
Crown to Axle 456/478 456/478
Colors Black, White Black, White
Options MILO Lock-Out MILO Lock-Out
9mm V-Brake Boss 9mm V-Brake Boss
ABS+ Tuning (shim stacks) ABS+ Tuning (shim stacks)
Custom Colors Custom Colors
Custom Graphics Custom Graphics

26 27
The Circus is fast becoming a legend amongst
circus
Circus Expert Circus Comp Circus Sport*
the dirt jump and urban riding scene. In fact
Weight Lbs / 4.7 / 2134 (w/20mm TA) 5.32 / 2413 (w/20mm TA)
no other fork has seen more time amongst the 5.4 / 2451 (9mm)
Grams w/ Aluminum Steerer w/ Aluminum Steerer
Hayes crew. Every “lunch ride” from October
Travel 80, 100 (Internally Adj), 130 80, 100 Internally Adj 80, 100 Internally Ad
through May is spent putting our DJ bikes
through the paces at Ray’s Indoor MTB park in Spring ACT Air Coil Coil
Milwaukee. Bottom Out Dual Bottom-Outs (1 / Leg) Dual Bottom-Outs (1 / Leg) Single Bottom-Out
Steerer 1 1/8” Aluminum 1 1/8” Steel or Aluminum
1 1/8” Steel
FEATURES 1.5” Taper 1.5” Taper
and benefits Crown 1 1/8” Hollow Crown, 1.5” 1 1/8” Hollow Crown, 1.5” 1 1/8” Hollow Crown, 1.5”
Forged I-Beam Crown Forged I-Beam Crown Forged I-Beam Crown
Jump Stack Crown Finish Color Matched Color Matched Shot Peen Black Anodized
TPC ABS+ Technology tuned specifically Offset 41.27 41.27 41.27
for Dirt Jump
Compression
Absolute+ w/ Jump Stack Absolute+ w/ Jump Stack FFD
New Casting Damping
Stronger arch handles the biggest air, and Rebound Damping Adjustable TPC Adjustable TPC TPC
the biggest errs Adjustments Air Mech. Preload
Compression to Lockout Compression to Lockout none
20mm Hex Axle Rebound Rebound
Torsionally superior Leg Diameter 32mm 32mm 32mm
Leg Material 7050 Straight Wall AL 4130 Chromoly Steel Hard Chrome Steel
Crown (Comp)
New I-Beam style; bigger, stronger and Wheel Size 26” 26” 26”
more durable Brake Post Mount Post Mount Post Mount
Axle 20mm Hex TA 20mm Hex TA 9mm
Dual Bottom-Outs Crown to Axle 458/478/508 458/478 458/478
Eliminates asymmetric forces during
bottom-out to reduce loads and extends Colors Black, White Black, White Black, White
product life. Easier on your wrists. *OE Only

ALL NEW GRAPHICS FOR 2014!

28 29
match
Match Comp
While the Match is our entry level
Weight Lbs / 5.1 / 2314 (80mm w/Alumi-
model, it still boasts excellent ride Grams num Steerer)
quality and overall performance. Of Travel 26” 80, 100, 130
course it’s also virtually maintenance
29 er
80,100,120
free. So riders can get out on the trail
Spring Coil
and look forward to the next rip.
Bottom Out Rubber Bumper

FEATURES Steerer 1 1/8” Steel


and benefits Crown Forged I-Beam Crown
Crown Finish Color Matched
Absolute+ damper Offset 41.27
Externally adjustable low-speed to Lock- Compression
out damping Internally tuneable high- TPC Technology Absolute+
Damping
speed damping Compatible with MILO
Rebound Damp-
Adjustable TPC
ing
Coil Spring
Linearity, plushness, maintenance Adjustments Mech. Preload Compression
to Lockout Rebound
free Leg Diameter 32mm

ALL NEW GRAPHICS FOR 2014! Leg Material Steel


Wheel Size 26, 29er
Brake Post Mount
Axle 9mm
Crown to Axle 458 / 478 / 508
Colors Black, White
Options MILO Lock-Out
9mm, V-Brake Boss,
QR15 (29er),
20mm TA,
1 1/8” Alloy,
1.5” Taper

What starts out


as an idea in
the brains of
our engineers
eventually ends up
in tight technical
drawings before
becoming a
tangible, 3D reality
that will exceed
rider expectations.

30 31
shocks

Manitou shocks continue to be amongst the Shock Configuration Radium Swinger Metel Revox

most tuneable, consistent performing in


152 x 32mm (6 x 1.25in)
165 x 38mm (6.5 x 1.5in)

the industry. Our tech service department is 190 x 50mm (7.5 x 2in)
200 x 50mm (7.875 x 2in)

also widely known for quick turnaround and 200 x 56mm (7.875 x 2.2in)
216 x 63mm (8.5 x 2.5in)
superior support. We’ll keep you pedaling! 222 x 70mm (8.75 x 2.75in) *
230 x 70mm (8.75 x 2.75in)
240 x 76mm (9.5 x 3in)
267 x 90mm (10.5 x 3.5in)
*222x65 w/ lock-out or DRC option

Usage Chart Remote Compatible XC Trail All-Mountain Free Ride Downhill


MRD
Revox Pro
PRO Swinger Pro Swinger Pro (Dual Air Can)
Radium Pro (Dual Air Can, Dual Range Compression
Revox Expert
Expert Swinger Expert Swinger Expert (Single Air Can, Optional Lock-Out)
Radium Expert (Single Air Can, Lock-Out)
Radium Comp
Comp
Metel Comp

32 33
swinger radium

Swinger Pro DC Swinger Expert Radium Pro DC Radium Expert Radium Comp
Weight Lbs / Grams 267 / .59 375 / .83
Weight Lbs / Grams 267 / .59 230 / .51 229 / 0.50
Damping Shim Stack Shim Stack
Damping Shim Stack Shim Stack Shim Stack
Canister Dia. DC 40mm/46mm ID 43mm ID
Canister Dia. DC 40mm/46mm ID 43mm ID 43mm ID
Adjustments Air, Rebound, LS Compression, Air, Rebound, LS Compression,
Adjustments Air, Rebound, Air, Rebound, Air, Rebound
HS Compression, HS Compression
Dual Range Compression Lock-Out
Dual Range Compression
Air Valve Type Straight, Long Straight, Long Straight, Short
Air Valve Type Straight, Long Straight, Long
Damper Shaft Material 10mm Alum 10mm Alum 10mm Alum
Damper Shaft Material 10mm Alumimum 10mm Aluminum
Damper Shaft Finish Hard Anodize Hard Anodize Hard Anodize
Damper Shaft Finish Hard Anodize Hard Anodize
Damper Body Color Black Hard Ano Black Hard Ano Black Hard Ano
Damper Body Color Black Hard Ano Black Hard Ano
Bushings Steel/Teflon Steel/Teflon Steel/Teflon
Bushings Steel/Teflon Steel/Teflon
Eyelet Hardware 2-pc AL through 37.9mm 2-pc AL through 37.9mm 2-pc AL through 37.9mm
Eyelet Hardware 2-pc AL through 37.9mm 2-pc AL through 37.9mm
3-pc S.S. at 38mm and wider 3-pc S.S. at 38mm and wider 3-pc S.S. at 38mm and wider
3-pc S.S. at 38mm and wider 3-pc S.S. at 38mm and wider
Options Lock-out* Dual Range Compression* Long Air Valve
Options Lock-out* Lock-out or Dual Range Compression Optional Knob for Optional Knob for 90° Swivel Air Valve
Optional Knob for Optional Knob or Lever for DRC Dual Range Comp Dual Range Comp 45° Swivel Air Valve
Dual Range Comp Compression Adj Remote Remote Custom Shim Stack
Remote Remote (only w. Lockout/DRC) 90° Swivel Air Valve 90° Swivel Air Valve Custom Spring Curve
90° Swivel Air Valve 90 Deg. Swivel Air Valve 45° Swivel Air Valve 45° Swivel Air Valve
45° Swivel Air Valve 45 Deg Swivel Air Valve Custom Shim Stack Custom Shim Stack
Custom Shim Stack Custom Shim Stack Custom Spring Curve Custom Spring Curve
Custom Spring Curve Custom Spring Curve Air fitting location Air fitting location
Air fitting location Air fitting location
*OE Only
*OE Only
34 35
revox metel

Revox Pro Revox Expert Revox Comp Metel Comp


Weight Lbs / Grams 0.99 / 450 (w/o spring) 0.97 / 442 (w/o spring) 0.87 / 394 (w/o spring) Weight Lbs / Grams .53 / 242 (190x50),
.6 / 271 (230x70) (w/o
Damping Shim Stack Shim Stack Shim Stack
spring)
Adjustments Preload
Rebound
Preload Damping Shim Stack
Rebound Preload
LS Compression Adjustments Preload & Rebound
LS Compression Rebound
HS Compression Damper Shaft Material 14mm Alum
HS Compression
No Tools Volume
Damper Shaft Finish Hard Anodize
Damper Shaft Material 14mm Alum 14mm Alum 14mm Alum
Damper Body Color Black Hard Ano
Damper Shaft Finish Hard Anodize Hard Anodize Hard Anodize
Bushings Steel/Teflon
Damper Body Color Black Hard Ano Black Hard Ano Black Hard Ano
Eyelet Hardware 2-pc AL through 37.9mm
Bushings Steel/Teflon Steel/Teflon Steel/Teflon 3-pc S.S. at 38mm and
Eyelet Hardware 2-pc AL through 37.9mm
2-pc AL through 37.9mm 2-pc AL through 37.9mm
wider
3-pc S.S. at 38mm and Options 250 to 650 lb/in Springs in
3-pc S.S. at 38mm and wider 3-pc S.S. at 38mm and wider
wider 50lb increments
Options 250 to 650 lb/in Springs 250 to 650 lb/in Springs 250 to 650 lb/in Springs
in 50lb increments in 50lb increments in 50lb increments
Custom Shim Stack Custom Shim Stack Custom Shim Stack
Bottom-Out Bumper rate Bottom-Out Bumper rate Bottom-Out Bumper rate

36 37

You might also like