Professional Documents
Culture Documents
CONTROL DESK
SOLUTIONS www.klinkmann.com
DELIVERY
- Areta structure already assembled with rear door or rear panel
- ATAL structure (to be ordered separately the shelf or the front panel
and the mounting plate – check on page 161-162)
DELIVERY
- Areta structure supplied flat-pack with rear door or rear panel
- ATAL structure (to be ordered separately the shelf
or the front panel and the mounting plate – check
on page 161-162)
CHARACTERISTICS/DELIVERY
Frame manufactured from 20/10 sheet steel. Roof extension
manufactured from 20/10 sheet steel. Upper door manufactured
from 15/10 sheet with sendzimir profiles and mechanical stop
avoiding accidental closing, and Ø 3mm double bar locking system.
Lower door manufactured from 15/10 sheet steel
with stiffening profile and Ø 3mm double bar latch closing system.
- adhesive gasket and mounting accessories
- a pair of structural uprights.
(*) AL front structure, rear door, rear panel are supplied together
with a pair of uprights.
ARETA AL
COMPLEMENTARY
ACCESSORIES
SHELF ATME
SHELF
CHARACTERISTICS ATME CABINET WIDTH
Structure manufactured from 15/10 sheet steel. CODE
Upper panel manufactured from 15/10 sheet steel ATME000600AL 600
with sendzimir rails and gas springs avoiding accidental closing.
ATME000800AL 800
PAINT FINISH ATME001200AL 1200
ETA standard epoxy polyester powder coating. ATME001600AL 1600
Colour: RAL 7035 textured finish.
DELIVERY
Supply includes:
- one shelf
- upper panel complete with Ø 3mm double bar locking system
- sealing gasket
- mounting accessories.
PANEL ATPN
CHARACTERISTICS
Manufactured from 15/10 sheet steel.
PAINT FINISH
Colour: RAL 7035 textured finish.
DELIVERY
Supply includes nr. 1 piece with mounting accessories.
PANEL
ATPN CABINET WIDTH
CODE
ATPN000600AL 600
ATPN000800AL 800
ATPN001200AL 1200
ATPN001600AL 1600
To be ordered separately:
- lateral rails (see below) and mounting accessories (see page 54).
RAILS WTPR
To be ordered separately:
- mounting accessories WTSF - 001CP.
RAILS
WTPR CABINET DEPTH
CODE
WTPR-050040CP 400
WTPR-050050CP 500
WTPR-050060CP 600
WTPR-050080CP 800
To be ordered separately:
- mounting accessories (see page 36).
CHARACTERISTICS
Corner pieces manufactured from 25/10 sheet steel,
with PVC front covers caps.
Front and side crosspieces manufactured from 20/10 press bent
sheet steel.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Colour: RAL 7025 textured finish
DELIVERY
The modular plinth is made up of:
- corner pieces: supply includes 4 pieces complete with front covers
and mounting hardware
- front crosspieces: supply includes 2 pieces
- side crosspieces: supply includes 2 pieces.
UNIVERSAL FRONT CROSSPIECES Note: for more information, assembly drawings and dimensional features,
please check on page 217.
ATZE DESCRIPTION CROSS.
CODE LENGTH (mm)
ATZE-T0600 FRONT CROSS. FOR PLINTH W=600 444
ATZE-T0800 FRONT CROSS. FOR PLINTH W=800 644
ATZE-T1200 FRONT CROSS. FOR PLINTH W=1200 1044
ATZE-T1600 FRONT CROSS. FOR PLINTH W=1600 1444
400MM DEPTH
BOX AE
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel.
Door manufactured from 15/10 sheet steel with lateral
stiffening cover.
DELIVERY
- box
- door complete with Ø 3mm double bar closing system
- mounting plate
- adjustable cable entry.
PAINT FINISH
ETA standard epoxy polyester powder coating.
W=600/800 W=1200/1600 Enclosure, door and panel: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A; UL50.
available available
space space
BOX AE
AE DIMENSIONS FIXING FLOOR CABLE ENTRY DOOR SPACE INNER PLATE
CODE B A P C D E F M L H I (MAX)
AE601 600 770 400 489 303 490 260 445 530 684 358
AE802 800 770 400 689 303 690 260 645 730 684 358
AE123 1200 770 400 1089 303 510 (x2) 260 445 1130 684 358
AE164 1600 770 400 1489 303 710 (x2) 260 645 1530 684 358
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Upper panel manufactured from 20/10 sheet steel with sendzimir
rails and gas springs to support lid and avoiding accidental closing.
DELIVERY
- shelf
- lid complete with Ø 3mm double bar closing system
- rails to mount supplementary mounting plate
- sealing gasket
- mounting accessories.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Enclosure, door and panel: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55.
available
SHELF LE
LE B NR. OF
CODE LOCKS
LE601 600 2
LE802 800 2
LE123 1200 2
LE164 1600 3
UPPER PART PE
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel
with zincpassivated 20/10 rails for mounting plate adjustment.
Overturning front panel manufactured from 20/10 sheet steel
complete with sendzimir vertical rails and mechanical stop.
DELIVERY
- upper part
- overturning front cover with Ø 3mm double bar closing system
- mounting plate
- sealing gasket
- mounting accessories.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Enclosure, door and panel: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55.
UPPER PART PE
PE B MOUNTING PLATE DIM.
CODE L H I (MAX)
PE601 600 510 370 250
innner plate
PE802 800 710 370 250
PE123 1200 1110 370 250
PE164 1600 1510 370 250
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Upper panel manufactured from 20/10 sheet steel with sendzimir rails
and gas springs to support lid and avoiding accidental closing.
DELIVERY
- shelf
- lid complete with Ø 3mm double bar closing system
- sealing gasket
- mounting accessories.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Enclosure, door and panel: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A, UL50
availab
le
SHELF ME
ME B NR. OF
CODE LOCKS
ME601 600 2
ME802 800 2
ME123 1200 2
ME164 1600 3
BOX AE
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel.
Front and rear doors manufactured from 15/10 sheet steel
with lateral stiffening cover.
DELIVERY
- box
- doors complete with Ø 3mm double bar closing system
- mounting plate
- adjustable cable entry.
PAINT FINISH
ETA standard epoxy polyester powder coating.
W=800 W=1200/1600 Box and doors: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A; UL50.
available
space
available available
space space
BOX AE
AE DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE INNER PLATE
CODE B A P C D E F M L H I (MAX)
AE8025 800 770 500 689 373 690 330 645 730 684 425
AE1235 1200 770 500 1089 373 510 (X2) 330 445 1130 684 425
AE1645 1600 770 500 1489 373 710 (X2) 330 645 1530 684 425
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Upper panel manufactured from 20/10 sheet steel with sendzimir rails
and gas springs to support lid and avoiding accidental closing.
DELIVERY
- shelf
- lid complete with Ø 3mm double bar closing system
- rails to mount supplementary mounting plate
- sealing gasket
- mounting accessories.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Box and doors: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55.
available
SHELF LE
LE B NR. CLOSING
CODE SYSTEM
LE8025 800 2
LE1235 1200 2
LE1645 1600 3
UPPER PART PE
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel
with 20/10 zincpassivated rails for mounting plate adjustment.
Overturning front and rear panel manufactured from 20/10 sheet steel
complete with sendzimir vertical rails and mechanical stop.
DELIVERY
- upper part
- overturning front cover with Ø 3mm double bar closing system
- mounting plate
- sealing gasket
- mounting accessories.
PROTECTION RATINGS
- IP 55.
inner plate
UPPER PART PE
PE B PLATE DIMENSIONS
CODE L H I (MAX)
PE8025 800 710 370 335
PE1235 1200 1110 370 335
PE1645 1600 1510 370 335
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Upper panel manufactured from 20/10 sheet steel with sendzimir rails
and gas springs to support lid and avoiding accidental closing.
DELIVERY
- shelf
- lid complete with Ø 3mm double bar closing system
- sealing gasket
- mounting accessories.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Box and doors: colour RAL 7035 textured finish.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A, UL50.
availab
le
SHELF ME
ME B NR. OF
CODE LOCKS
ME8025 800 2
ME1235 1200 2
ME1645 1600 3
UNIVERSAL FRONT CR0SSPIECES Note: for more information, assembly drawings and dimensional features,
please check on page 217.
ATZE DESCRIPTION CROSS.
CODE LENGTH (mm)
ATZE-T0600 FRONT. CROSS. FOR PLINTH W=600 444
ATZE-T0800 FRONT. CROSS. FOR PLINTH W=800 644
ATZE-T1200 FRONT. CROSS. FOR PLINTH W=1200 1044
ATZE-T1600 FRONT. CROSS. FOR PLINTH W=1600 1444
MONOBLOC
CONTROL DESKS
SBA
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel.
Front and rear doors manufactured from 15/10 sheet steel
with lateral stiffening cover.
Upper panel manufactured from 15/10 sheet steel complete
with sendzimir rails and gas springs to support lid
and avoiding accidental closing.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Structure, doors, upper panel: colour RAL 7035 textured finish.
DELIVERY
- control desk
- doors complete with Ø 3mm double bar closing system
- mounting plate
- upper panel complete with closing system
W=600/800 W=1000/1200 - adjustable cable entry.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A, UL50.
availa
ble
available
CHARACTERISTICS
Corner pieces manufactured from 25/10 sheet steel,
with PVC front covers caps.
Front and side crosspieces manufactured from 20/10 press bent
sheet steel.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Colour: RAL 7025 textured finish.
DELIVERY
The modular plinth is made up of:
- corner pieces: supply includes 4 pieces complete with front covers
and mounting hardware
- front crosspieces: supply includes 2 pieces
- side crosspieces: supply includes 2 pieces
UNIVERSAL FRONT CROSSPIECES Note: for more information, assembly drawings and dimensional features,
please check on page 217.
ATZE DESCRIPTION CROSS.
CODE LENGTH (mm)
ATZE-T0600 FRONT CROSS. FOR PLINTH W=600 444
ATZE-T0800 FRONT CROSS. FOR PLINTH W=800 644
ATZE-T1000 FRONT CROSS. FOR PLINTH W=1000 844
ATZE-T1200 FRONT CROSS. FOR PLINTH W=1200 1044
ZBA
CHARACTERISTICS
Structure manufactured from 15/10 press bent sheet steel.
Mounting plate manufactured from 25/10 sendzimir sheet steel
mounted on the rear cover.
Upper cover manufactured from 15/10 sheet steel complete
with sendzimir profiles and mechanical stop.
Adjustable cable entry.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Structure, doors, upper panel: colour RAL 7035 textured finish.
DELIVERY
- control desk
- doors complete with Ø 3mm double bar closing system
- mounting plate
- upper cover complete with locking system
- adjustable cable entry.
CONFORMITY AND APPROVAL
PROTECTION RATINGS
- IP 55
- NEMA 12 complying with UL508A, UL50.
W=600/800 W=1000/1200
inner plate
availa
ble
available
CHARACTERISTICS
Corner pieces manufactured from 25/10 sheet steel,
with PVC front covers caps.
Front and side crosspieces manufactured from 20/10 press bent
sheet steel.
PAINT FINISH
ETA standard epoxy polyester powder coating.
Colour: RAL 7025 textured finish.
DELIVERY
The modular plinth is made up of:
- corner pieces: supply includes 4 pieces complete with front covers
and mounting hardware
- front crosspieces: supply includes 2 pieces
- side crosspieces: supply includes 2 pieces
UNIVERSAL FRONT CROSSPIECES Note: for more information, assembly drawings and dimensional features,
please check on page 217.
ATZE DESCRIPTION CROSS.
CODE LENGTH (mm)
ATZE-T0600 FRONT CROSS. FOR PLINTH W=600 444
ATZE-T0800 FRONT CROSS. FOR PLINTH W=800 644
ATZE-T1000 FRONT CROSS. FOR PLINTH W=1000 844
ATZE-T1200 FRONT CROSS. FOR PLINTH W=1200 1044
CONTROL DESKS
COMPLEMENTARY
ACCESSORIES
CASING FOR PE
TL FOR LE D=400
TL DIMENSIONS
CODE B P
TL601 600 398
TL802 800 398
TL123 1200 398
TL164 1600 398
TL FOR LE D=500
TL DIMENSIONS
CODE B P
TL8025 800 498
TL1235 1200 498
TL1645 1600 498
HANDLE
WA WIDTH
CODE
WA-400 600
WA-410 800
WA-430 1000
WA-440 1200
WA-450 1600
LOCKING SYSTEMS
WE REF. DESCRIPTION
CODE
WE010 1 ROD SYSTEM
WE080 2 FIAT INSERT
WE210 3 FIAT KEY
WE027 4 COVER FOR FIAT INSERT
WE030 5 ETA INSERT Ø 3
WE160 6 ETA KEY Ø 3
WE040 7 ETA INSERT Ø 5
WE170 8 ETA KEY Ø 5
WE050 9 INSERT 7
WE180 10 KEY 7
WE060 11 INSERT 8
WE190 12 KEY 8
WE070 13 INSERT 7
WE200 14 KEY 7
WE020 15 ETA LOCK COVER
ETA_Control_Desk_Solutions_en_0911.pdf