Professional Documents
Culture Documents
10- VITALITY
COMMANDS SHORTCUT KEYS FUNCTION
LINE L Command that draw simple line from one point
to another.
POLYLINE PL Connected sequence of line or arc segmented
created as a single object.
RECTANGLE REC Used to draw a rectangle whose sides are
vertical and horizontal.
CIRCLE C Creates circles using center point and radius.
Allows you to draw an arc of a circle. Simply
ARC A specify various combination of center, end point,
start, radius, chord length and direction values.
CENTER C Creates an ellipse using specified center point.
HATCH H Standard pattern lines such as rectangles, polar
and path (for new version of AUTOCAD).
Creates a type of spline known as a Non-Uniform
SPLINE SPL Rational B-Spline, NURBS for short. A-Spline is
smooth curve that is fitted along a number of
control points.
Closed polygons with equal length sides and
POLYGONS POL angles. It is the simpliest method for creating
equilateral, triangles, squares, pentagons,
hexagons and so on.
Used to relocate selected objects. Select subject
MOVE M to move specifically the base point (1) and then
specify second point to determine the distance
and direction of the move (2).
Command Entry:
MOVE or M (press ENTER)
Used to copy objects within a drawing, by
defining a base point (starting point) and a
COPY CO or CP second point of displacement.
Command Entry:
COPY or CO or CP (press ENTER)
Erases (deletes) any selected object(s) from the
ERASE E drawing.
Command Entry:
ERASE or E (press ENTER)
Cut an object at an edge defined by on or more
objects. By default, objects defined as cutting
TRIM TR edges must intersect the object to be trimmed.
Command Entry:
TRIM or TR (press ENTER)
Connect two object with an arc of specified
radius that is tangent the object. Use radius
FILLET F option of the fillet command to specify arc
radius of the fillet. Changing the radius sets the
default for subsequent fillet.
Command to rotate selected objects at a
ROTATE RO specified base point.
Command Entry:
ROTATE or RO (press ENTER)
Breaks a compound objects into its component
EXPLODE X objects.
Command Entry:
EXPLODE or X (press ENTER)