Professional Documents
Culture Documents
•NEVER SETTLE FOR ANYTHING LESS THAN EXCELLENCE. NEMO NETWORK TESTING SOLUTIONS
Sommaire
Nemo Outdoor
Nemo Autonomous
• Nemo Handy provides you with smart and discreet solutions for thorough and advanced
measurement and optimization of the wireless air interface and mobile application QoS/QoE.
Nemo Walker Air
Overview
Advantages
• Easy to use :
• Mobile - flexible - discreet:
• Measures in transport (bus, train, subway, ...)
• Indoor measurements (buildings, railway station, airport, shopping center ...)
• Measures in sensitive areas
• Measures in areas difficult to reach by car
• Avoid any connectivity problems encountered in Drive Test
Nemo Handy-A
Features
Software Installation
• The software is then downloaded into the terminal
• Go to the directory My Files / Download and launch the application
• Confirm with Next and Install
• Once installation is complete, validate Open
Nemo Nemo Handy-A
Installation SW Nemo Handy-A
Software Installation
• At startup, Nemo Handy-A request access Superuser
• Click on "Remember choice forever" and confirm by Allow
• Then Nemo Handy-A request to validate the license
• After charging the license, the Start page appears and the tool requires a
device reboot
Nemo Handy-A
License Management
• Some options are provided standard with the new software, others may
be paying options (eg Voice Quality Measurement).
• The license update is OTA (Over The Air) directly from the app Nemo
Handy-A
• The device connects via the mobile network (3G / LTE) or via Wi-Fi Nemo
license server.
Version of Nemo
Handy-A
Version of Android Content of the
Nemo ID/version license to load
Contents of the
current license
Nemo Handy Configuration
Screenshot
Menu
Curent measurements
Nemo Handy
Configuration Handy
Menu
The button provides access to following
actions:
• Forcing To block the terminal on a frequency band, a system, a
channel
• Enable / Disable WiFi To enable / disable WiFi
• Setting… Handy settings
• Help Access to documentation
• About Access to device information (SW version, licence, …)
• Exit To stop the application
Nemo Handy
Configuration Handy
Backlight Option defines the brightness of the backlight.
Settings… / Settings / General Answer incoming calls Enable / disable automatic response during incoming call
Call answer delay Option allows you to define the delay in milliseconds before answering
an incoming call.
Use dialer for calls Option allows using the inbuilt Android phone dialer. The Dialer enables
sending DTMF tones and using for example a Bluetooth headset to hear
the audio while performing voice call testing with Handy.
Phone number defines the phone number of the Nemo Handy-A terminal
Screenshot format Defines in which format (.pgn or .jpg) the captured screenshot will be
saved.
Show serving info Displays or not information for the serving cell on all views
Best RSCP Low Active set received signal code power under -95
Best Ec/N0 Active set Ec/N0 under -15
Tx Power High TX power over 14
BLER High Block error rate downlink over 5
Rx Lev Low RX level under -95
Rx Qual Bad RX quality over 4
C/I Low C/I under 12
Percentage of Percentage of downlink power up commands over 60
downlink power up
commands over 60
UL Power Up High Percentage of uplink power up commands over 60
Nemo Handy
Configuration Handy
change of state
Notification / events on state Default
Cell ID Canged
Channel Changed In case of change of
LAC Changed value
System Changed
GPS Status
Notification/Evènement sur GPS
GPS Fix Acquired
GPS Fix Lost
GPS Disconnected
GPS Connected
Nemo Handy
Configuration Handy
Notification/Event
Voice FTP/HTTP FTP/HTTP
Voice Call Attempt Connection Attempt Transfer Attempt
Voice Call Connected Connection Success Transfer Success
Voice Call Failed Cnnection Failed Transfer Failed
Measurement File Defines the file format used in measurements. The file format options
Format are Measurement file (.nmf, default) and Debuglog (.nbl
Autologging option is selected, Nemo Handy-A will start logging when a script is
started and stop logging when the script is finished
Log file splitting Option allows you to split the log files into manageable sized files
instead of having one large file
Measurement upload allows you to save connection settings into configurations that can be
used when uploading files on a server
Background logging when activated, enables idle logging with Nemo Handy
(OFF/ON),
IP capture max packet defines how many bytes to capture from each packet
size
Initial marker when selected, a dialog will be displayed when logging begins, in which
the user can define a measurement description
Predefined marker allows user to define the marker before starting logging
Nemo Handy
Configuration Handy
Use GPS time option is activated is synchronized with GPS time at the beginning of a
measurement
Bluetooth devices Displays all Bluetooth devices associated with the terminal
GPS source:
• Disable the use of GPS
• Connect the mobile to the internal
GPS
• Connect the Mobile to an external
GPS
Nemo Handy
Configuration Handy
Time sync Time sync is enabled, latency and UTC time information is sent to Nemo Server with
every comman
Mandatory is , configuring the server successfully is mandatory for the execution of the script
enabled
Username
Password
Prefix Defines a prefix written to all measurement files made by the server. Prefix cannot
contain spaces or special characters.
Call Receive Timeout Defines how long (in seconds) the server waits for a call to connect before ending the
(sec) call
Call duration (sec) Defines the duration (in seconds) of the call
MOS threshold Can be used to limit the number of samples saved to the server. For example, only
samples with a MOS score below 3 are save
Save sample Defines whether samples falling below MOS threshold are saved or not.
Enable PESQ Defines whether MOS values are calculated using PESQ.
Enable POLQA Defines whether MOS values are calculated using POLQAv
Nemo Handy
Configuration Handy
BTS file Selects the BTS file to use. The BTS file must be saved in nbf
or csv format on file (phone / Nemo / Air Walker / BTS)
Cell info Displays information about the cells on the map (System, Site,
Cell, BSIC, ...)
Route width Sets the line width of the route displayed on the map
HTTP map loading Defines when Nemo Handy is permitted to load a map
PRÉSENTATION DES VUES DE L’OUTIL
VUES DISPONIBLES QUELQUE SOIT LE MODE
Nemo Handy-A
Available views
Vues standard/option mode Vues standard/option mode
Status standard Normal mode Inter-system cells standard Normal mode
Slave State Standard Normal mode
Script standard Normal mode MIMO standard UMTS, LTE
GPS standard Normal mode Signaling standard Normal mode
Web view standard Normal mode WCDMA standard UMTS
Indoor standard Normal mode GSM standard GSM
Outdoor standard Normal mode Application throughput standard Normal mode
Notification history standard Normal mode PPP throughput standard Normal mode
BTS standard Normal mode Iperf standard Normal mode
Youtube standard Normal mode Youtube parameters standard Normal mode
Facebook standard Normal mode HSDPA standard UMTS
Summary standard Normal mode HSUPA standard UMTS
WCDMA cell measurements standard UMTS GPRS standard GSM
WCDMA cell table standard UMTS LTE link adaptation downlink standard LTE
GSM cell measurements standard GSM LTE link adaptation uplink standard LTE
GSM cell table standard GSM Voice quality option GSM, UMTS
LTE cell measurements standard LTE WiFi standard Normal mode
LTE cell table standard LTE Statistics standard Normal mode
Nemo Handy-A
Available views Logging status Indicates whether the terminal is in Capture mode or not
Log file size The size measurement file during capture
Log file name Nom du fichier de mesure
Band Lock Displays if the mobile is locked to a frequency band (900, 1800, 2100 ...)
LTE PCI lock Only LTE, will block the phone on a PCI
Interface
Address
Gateway
DNS
NSAPI
Nemo Handy-A
Available views
Repeat Displays the number of times the script should be repeated and how
many times it has been repeated now
Command Displays the current control of the current script
Script commands Displays the script loaded, the current step is bold
Nemo Handy-A
Available views
• It is possible to display
the contents of each
message by selecting one
of them.
For a new script, select No script and confirm with New script.
Nemo Handy
Features/Measurement
4 types of forcing :
System (GSM, 3G, LTE)
On Frequency band (GSM900, UMTS2100 ...)
Canal (3G only)
Voice Codec (GSM AMR FR, GSM AMR HR ...)
Note : When you add a map in image format, Nemo Handy-A will
automatically genere a MapInfo file (.tab) based on the image file.
Nemo Handy-A
Features / Indoor measurements
Loading a map Indoor
Settings... Settings Indoor -> Floorplans
Configure the plan by changing the size of the map or the name of the layer
Nemo Handy-A
Features / Indoor measurements
Loading a map Indoor
Take example with picture
Nemo Handy-A
Features / Indoor measurements
• Exit building will remove the flour from the map and find the
Outdoor format.
• To start the measurement, press the button
Nemo Handy-A
Features / Indoor measurements
the markers are used to record the tracing of a Indoor course. With this, the
user in post-traitement can creating Indoor radio coverage plans, locate
events as the Outdoor course.
Cancel marker
Exemple:
BSIC_NUMBER_FORMAT “OCT”
SEPARATOR “;”
SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;LAC;DIR;NCELL_1;NCELL_2;NCELL_3
GSM;Site Name 1;65.066053;25.458366;Cell Name 1;64;77;12500;65231;0;NEMO1;NEMO2;NEMO3
Annexes
BTS File
Required parameters/ for GSM - Cell
Annexes
BTS File
optional parameters / for GSM-cell
Annexes
BTS File
Required parameters / for UMTS – Cell with Cell ID 16 bits
Exemple :
SYSTEM;SITE;LAT;LON;CELL;CH;CID_16;RNC_ID;SCR;DIR;NCELL_1;NCELL_2;NCELL_3
UMTS;Site Name 1;65.066053;25.458366;Cell Name 1;10838;58275;1;96;0;NEMO1;NEMO2;NEMO3
Annexes
BTS File
Optional parameters / for UMTS - Cell
Annexes
BTS File
Required parameters / for LTE - Cell
Exemple :
SYSTEM;SITE;LAT;LON;CELL;CH;CID;PCI;DIR;NCELL_1;NCELL_2;NCELL_3
LTE;Site Name 1;65.066053;25.458366;Cell Name 1;65535;26842545;96;0;NEMO1;NEMO2;NEMO3
Annexes
BTS File
Optional parameters / for LTE - Cell
Thank You!
www.anite.com\nemo