Professional Documents
Culture Documents
com
Industry News
News
A threaded Flange is used for special circumstances with their main advantage being that
they can be attached to the pipe without welding. Sometimes a seal weld is also used in
conjunction with the threaded connection. This special type of flange is generally used
for high pressure piping system, yet smaller diameter applications. Obviously, the larger
the flange is, the harder the ability to machine a thread would be.
Threaded flange means the inner bore of a flange is thread, the shape of the threaded
flange is like a slip on flange, so the threaded flange could be plate shape or with a hub for
longer thread.
The threaded pipe flange is connected to a pipe with a external thread on the pipe end , so
the flange thread should have same thread specification with the pipe thread, the
advantage of a threaded flange is that the piping system would be easily to assembly
because there is no welding in this piping joint.
The Threaded flanges are usually supplied with a raised face (RF) or flat face (FF) sealing
face. When a raised face is necessary for threaded pipe flanges, the standard height
should be 1/16″ for the face under class400, If the threaded pipe flanges is same or more
than class 400 , the standard threaded pipe flange raised face height should be 1/4″.
The threaded pipe flange commonly used in a small sizes and not very high pressure
situation. The threaded flange is no welding in the joint ,it means the flange could be used
for some situations which is not able to arrange a welding work.
www.steeljrv.com
www.steeljrv.com
Threaded flanges are widely demanded as pipe flanges i.e called as threaded pipe
flanges used in different industrial applications.
Threaded Flanges are also known as screwed flange, and it is having a thread inside the
flange bore which fits on the pipe with matching male thread on the pipe.
This type of joint connection is Speedy and simple but not suitable for high presser and
temperature applications. Threaded Flanges are mostly used in utility services such as air
and water.
Threaded (Screwed) flange is similar to the Slip-On flange, but the bore is threaded.
Its chief merit is that it can be assembled withour welding, explaining its use in low
pressure services at ordinary atmospheric temperatures, and in highly explosive
areas where welding create a hazard.
www.steeljrv.com
www.steeljrv.com
Threaded Flanges can be used in very high pressure services and their major
advantage is that they can be assembled without welding.
www.steeljrv.com
www.steeljrv.com
www.steeljrv.com
www.steeljrv.com
www.steeljrv.com
www.steeljrv.com
Threaded flanges are threaded in the bore which match an external thread on the
pipe. Threaded flanges are used with pipes that have external threads. The benefit of
these flanges is that it can be attached without welding.
Threaded flanges can be fitted to pipes of various sizes without welding and
this is one chief benefit for which these flanges are highly demanded.
They can be used in extremely high pressure applications, particularly at or
near atmospheric temperature, where the necessary post weld heat
treatment is not possible.
They are ideal for small diameter piping applications.
They are economical and time saving devices.
These threaded flanges are normally designed for non-cyclic applications.
The flanges are suitable to be used in applications where welding is
hazardous.
They can be used in highly explosive areas.
They are the special type of pipe flanges which can be attached to the pipe without
welding.
Pressure
America Series: Class 150 ,Class 300, Class 600, Class 900A ,Class 1500,Class
2500.
www.steeljrv.com
www.steeljrv.com
Europe Series:
PN2.5,PN6,PN10,PN16,PN25,PN40,PN63,PN100,PN160,PN250,PN320,PN400.
MATERIAL:
Type:
Threaded Flanges, TH Flanges, Plain threaded flanges, Female threaded flanges, Male
threaded flanges
Packing: plywood case and plywood pallet
Standards
www.steeljrv.com
www.steeljrv.com
Industrial Processes
Die forging,Machining.
≤ 24 = 1.6 mm ≤ 10 = ±0.8 mm
> 24 = ±3.2 mm ≥ 12 = + 1.6 mm / – 0 mm
DRILLING
DIAMETER OF COUNTERBORE
OUTSIDE DIAMETER OF HUB
Same as for Inside Diameter
≤ 12 = + 2.4 mm / – 1.6 mm
www.steeljrv.com
www.steeljrv.com
≥ 14 = ±3.2 mm
(Yaang Pipe Industry is a leading manufacturer and supplier of nickel alloy and stainless
steel products, including Super Duplex Stainless Steel Flanges, Stainless Steel Flanges,
Stainless Steel Pipe Fittings, Stainless Steel Pipe. Yaang products are widely used in
Shipbuilding, Nuclear power, Marine engineering, Petroleum, Chemical, Mining, Sewage
treatment, Natural gas and Pressure vessels and other industries.)
If you want to have more information about the article or you want to share your opinion
with us, contact us at sales@steeljrv.com
Please notice that you might be interested in the other technical articles we’ve published:
www.steeljrv.com
www.steeljrv.com
References:
https://www.pipingonline.com/flanges/threaded_flange_en_1092-type_13_thr
eaded_flange
https://www.yaang.com
www.steeljrv.com