Professional Documents
Culture Documents
2. On the Moxa, verify the Power LED is orange, and the Ready and Port 1 LEDs are
green.
119
4. If Sawyer is unable to communicate with the Moxa, verify the static IP on the Moxa
is correct.
a. Remove the Ethernet cable from Port 1.
b. Use an Ethernet cable to connect a PC (laptop, desktop) to the Moxa.
i. Plug the Ethernet cable into Ethernet port on the PC and into Port 1
on the Moxa.
120
f. On the left Menu bar, select ‘Network Settings’ then ‘Ethernet Configuration’
g. Change the ‘IP Configuration’ to Static, enter the following IP addresses, and
click ‘Submit’.
i. IP address 203.0.113.129
ii. Subnet mask 255.255.255.0
iii. Default gateway 203.0.113.1
5. Repeat Step 4c with the new IP address 203.0.113.125, the click ‘OK’.
6. Repeat Step 4d with the new IP address 203.0.113.129 and press Enter. The Moxa
homepage should appear.
121
7. Disconnect the Ethernet cable from Port 1 on the Moxa and reinstall the original
Ethernet cable back into Port 1.
9. Position the door against the Control Box and turn the knob clockwise to secure it.
Pneumatic Valve(s)
Prerequisites
Follow the ESD procedure
122