Blockwork/Blockwork For Internal - Metex recommend GI Wall Movement Joints. Tie with Rubber Sleeve (728-747) with Manufacturer and reference; width of 25mm thickness of 2mm, Ancon PPS or equal approved. 2.5mm,3mm, and length of 200mm - Material/finish; Stainless steel 250mm 1 externally, Galvanized Mild COMPLY Steel Internally. For External - Metex recommend SS Wall Size: 200mm and varies, refer Tie with Rubber Sleeve (728-747) with floor plans. width of 25mm thickness of 2mm, 2.5mm,3mm, and length of 200mm - 250mm
222 - FIXING BETWEEN
CONCRETE WALLS/COLUMNS & BLOCKWORK. Manufacturer: As below or equal approved. Emirates Specialities Co. LLC, Ancon - Product refernce: Emirates Metex recommend using our SS L- Specialities - Expamet, Ancon- bolt/screw-on split-end wall tie [MLSS] with 2 PPV or Equal approved. COMPLY width of 25mm, thickness of 2mm, 2.5mm Material/finish: Stainless steel. and 3mm, and length of 200mm - 250mm. - Fixing to concrete in accordance with manufacturer's recommendations. -Fix to the concrete wall/column spaced 400mm centres vertically and 900mm horizontally staggered and additionally one every 400mm vertically at ends, jambs, quoins 241 etc. - WALL STARTERS/CONNECTORS For Internal - Metex recommend using our Manufacturer: As below or GI Cavity Wall tie Flat two side split-end equal approved. [MFS2] with thickness of 2mm and length Expamet: Emirates of 275mm. Specialities Co. LLC, or TMI: TMI Co. LLC. 3 -Product reference; WGC120 & COMPLY WS120 or equal approved. For External - Metex recommend using our Material/finish; Galvanized SS Cavity Wall tie Flat two side split-end steel for internal walls & [MFS2] with thickness of 2mm and length Stainless Steel for external of 275mm. walls. Size: To suit the wall thickness. walls. Size: To suit the wall thickness.
RESTRAINT SLIP TIES TO TOPS OF MASONRY WALLS. For Internal we recommend using our GI Manufacturer: As below or Vertical Movement Tie [MVM1] which equal approved. provides vertical adjustment and resists Expamet: Emirates forces perpendicular to wall plane. Specialities Co. LLC, or TMI: Size; 200mm x 2mm. TMI Co. LLC. 4 -Product reference: As COMPLY recommended by the contractor subject to For External we recommend using our SS Engineer's approval. Vertical Movement Tie [MVM1] which Material/finish: Galvanized provides vertical adjustment and resists steel for internal walls & forces perpendicular to wall plane. Stainless Steel for external Size; 200mm x 2mm. walls. Sizes: To BS EN 845-1.
270 - MESHWORK JOINT
REINFORCEMENT FOR MASONRY WALLS. Standard: To BS EN 845-3. Manufacturer: As below or equal approved. Expamet: Emirates Specialities Co. LLC, or TMI: TMI Co. LLC. Or Ancon. We recommend using Block Mesh, which -Product reference: As are manufactured in accordance with BS recommended by the EN 13658:1-2:2005 (ASTM C 847). Its contractor subject to galvanized type are produced from coils in Engineer's approval. accordance with BS EN 10346:2009 (ASTM Type: Expanded Metal. A653/A653M), formerly BS EN 10142:1991, Material: Galvanized steel for with coating type Z180-Z275 (G60-G90). internal walls & Stainless Steel 5 With standard length of 50mtr and 100mtr COMPLY for external walls. and width's (80mm, 100mm, 178mm, Width: Approximately 40- 200mm, 250mm, 300mm and 350mm). 50mm less in width than wall or leaf. For external we recommend We Placement: Lay on an even recommend using our SS Block Mesh with a bed of mortar in a continuous length of 2.44meters and widths’ (80, strip with full laps at angles. 100,150 and 200mm) Keep 285 -back MASONRY20mm from face of external work, 12mm REINFORCEMENT back TO MULTI- from THICKNESS BLOCKWORK and face of internal work finish jointStainless Material: to normal Steel thickness. externally. -Lap length -fixing (minimum): centers; Every 3 225mm. courses externally. -fixing centers; Every 3 courses