Professional Documents
Culture Documents
01
RESIDENTIAL L&T Metering provides accurate and
reliable solutions for residential
METERING metering.
EM101+ Single Phase Meter This compact single phase meter fits snugly into any meter
box. The bright back-lit display ensures ease of reading.
Features
Class 1 accuracy as per IS and IEC standards
Forward energy recording irrespective of current direction
Optical port/RS 232 port (optional)
Indication for power on, current reversal and ELT
Reset backups and TOD facility
High surge withstand capability
Anti-tamper features
Dimensions
174 H x 141 B x 74 D mm
EM301 Three Phase Meter The superiority of this meter lies in its ability to work
normally under reverse current, unbalance voltage and
current, reversed phase sequence and voltage variation.
Features
Class 1 accuracy
LEDs indicating presence of each phase
Withstands 440V between phase and neutral
Maintains accuracy under current reversal conditions
High surge withstand capability up to 8kV
Polycarbonate enclosure
Anti-tamper features
Dimensions
172 H X 180.5 B X 76 D mm
Features
Class 1.0 accuracy as per revelant IS and IEC Standards
10-40, 10-60, 20-100 A current rating
Upto 3 Maximum Demand registers
Load Survey
Anti-tamper features
Self diagnostic capability
Optical port/RS 232 (optional)
Dimensions
327 H x 187 B x 120 D mm
ER300P CT Operated Meter This meter is designed for metering of HT/LT consumers
feeders. The meter has advanced data and tamper recording
capabilities and is provided with communication ports.
Software is available for data collection, load survey analysis
and energy management applications. The meter can be
interfaced to a variety of communication devices.
Features
Class 0.2s,0.5s,1.0 as per relevant IS and IEC Standards
1A and 5A current rating
3Phase 4 Wire/3Phase 3 Wire system
Anti-tamper features
Self diagnostic capability
Multiple tariff feature
Upto 3 Maximum Demand registers
Load Survey features
Upto 12 reset backups
Optical port/RS 232/RS485 (optional)
Dimensions
327 H x 187 B x 104 D mm
03
UTILITY L&T’s high accuracy meters are used by many
of the largest utilities for measurement of bulk
Features
Class 0.2s accuracy
3 Phase 4 Wire
Conforms to IEC and IS standards
15 minute block average for frequency and energy
Frequency coding for billing
Separate reactive energy registers linked to
supply voltage
Midnight storage of energies
Load Survey
Optical port/RS 485 communication (optional)
Dimensions
327 H x 167 B x 104 D mm
Features
Class 0.5s accuracy for active and class1.0 accuracy for
reactive as per IS & IEC standards
CT operated meter with 5A(Ib) to 10A(Imax.)
Pulse LED output
Indication for power on, current reversal,
ELT and neutral missing
Load Survey, reset back ups and TOD features
Optical port
Dimensions
174 H X 141 B X 85 D mm
QUASAR™ Intelligent Panel Meter This meter uses DSP technology to measure both
instantaneous and cumulative values in an electrical circuit.
The parameters are shown on a 3-line display that can be
scrolled through using push buttons.
Features
Class 0.5s and class 1.0 accuracy as per IS and IEC standards
LCD display with backlight
CT/PT programming
LT/HT models
Current ratings of 1A and 5A
RS 485 communication (optional)
Dimensions
96 L x 96 B x 112.5 D mm
NOVA™ 3P4W kWh Meter This panel meter measures voltage, current and kWh energy
with RS 485 in a 3 phase 4 wire system. The meter has an LCD display with
backlight, thus enabling ease of reading.
Features
Class 1 accuracy
AC/DC auxiliary supply
RS 485 communication
Password protected CT/PT value programming
Dimensions
96 L x 96 B x 105 D mm
GEMiNi Dual Source Meter This panel meter is designed for dual source energy
measurement. It serves as a replacement for two separate
energy meters, necessary for metering applications with
dual energy sources.
Features
LCD display
Class 1 accuracy
Separate registers available for measurement of
utility power and generator power
AC/DC auxiliary supply
RS 485 communication
Password protected CT/PT value programming
05
Dimensions
96 L x 96 B x 105 D mm
ENERGY MANAGEMENT L&T Metering’s panel meters
find wide application in a variety
of switch-boards and panels
Features
Class 1 accuracy
kWh measurement
1A and 5A current rating
Pulse LED output
Terminal covers with sealing provision
Dimensions
96 L x 96 B x 100 D mm
VEGA™ Digital Panel Meter The VEGA range consists of panel meters which measure
electrical parameters such as voltage, current and energy.
These meters can be used for both LT and HT applications.
This range includes:
• Single function meters-voltmeters, ammeters,
frequency meters
• VAF meters: display voltage, current, and frequency on
a 3-line display
• Multifunction meters: display energies, demands and
import/export values. They are available in 3 variants:
Model A: Displays voltages, currents, power and energy
Model B: Model A + neutral current + demand
parameters
Model C: Model B + import/export
Features
LED display
Class 1 accuracy
Password protected programming
Current ratings of 1A and 5A
RS 485 communication (select models only)
Relays for fault tripping (optional)
Dimensions
Single function meters : 96 L x 96 B x 45 D mm
VAF meter : 96 L x 96 B x 45 D mm
Multifunction meters : 96 L x 96 B x 65 D mm
06 L&T METERS THE RIGHT MEASURE
ENERGY MANAGEMENT L&T provides compact and
economical metering solutions
to monitor loads for better
SYSTEMS energy management.
mi-Energy™ DIN Rail Energy Meter mi-Energy is a DIN-rail mounted energy meter. Available in
1- and 3-phase models, these meters are useful in monitoring
energy consumption in distribution boards and cabinets. With
an additional Wi-Fi module, meter data can be easily viewed
on laptops and smart phones.
Features
LCD display
Class 2 accuracy
Displays day, week, month and push-to-push consumption
Optical communication port
Reverse current indication (for 3 phase models only)
Dimensions
3 phase: 125 L x 83 B x 63.5 D mm
1 phase: 36 L x 83 B x 66.73 D mm
RPM 8/14 Reactive Power Manager Reactive power manager is designed for automatic control of
capacitor banks in 3 phase 4 wire LT distribution systems.
The relay maintains the system power factor at a set value,
under fluctuating load conditions, by connecting or
disconnecting capacitor banks to the 415V bus.
Features
Automatic C/K ratio selection
Power Factor correction up to 1% of rated current
8/14 capacitor banks
Programmable CT ratio and capacitor bank values
Voltage, current and reactive power display
Dimensions
144 H X 144 B X 110 D mm
07
METERING L&T has ready-to-use AMR solutions for
display, analysis and reporting of meter
data using a simple, easy-to-understand
SOLUTIONS user interface.
VinPlus Data Collection and VinPlus is the application software used with tariff meters.
Analysis Tool
VinPlus supports convenient collection of energy data either
directly from remote TVM or from HHU’s.
PRIMAS Data Acquisition and Energy PRIMAS is a Data Acquisition and Energy Audit Software. The
Audit Software software acquires and manages vast data collected from
meters installed at various levels in the distribution network.
Features
Logs data from the TVMs connected at the various levels in
the distribution network
SANGRAHA Meter Data Acquisition SANGRAHA is a meter data acquisition software for
System collection of data from energy meters. It is a web application
which hosts MIOS-compliant APIs to collect meter data and
convert the raw data into common document format files.
Data collection is independent of meter make, type or
manufacturer (subject to availability of respective
manufacturer’s MIOS APIs.)
Data is collected through different channels such as GSM,
PSTN, GPRS and MRI devices. MODBUS data can also be
collected for a defined frequency / time-interval.
Schedules can be configured for automatic collection
and based on multiple parameters as inputs. The reports and
logs in the application depict data acquisition status and
allow for monitoring. Data integrity is maintained at 3 levels.
CMG 300 GSM/GPRS Modem CMG 300 is a compact real time telemetric data collection
system. It supports both GSM and GPRS technologies.
Features
Can be retrofitted to existing installed meters
Quick and easy installation
Power drawn from meter’s potential terminals
Rugged power supply
Sealable SIM card holder
Dual Band GSM 900/1800MHz
Supports Data and SMS
Maximum power output: 2W (900MHz) and 1W (1800MHz)
AT command set (GSM 07.05, GSM 07.007 and proprietary)
3V SIM interface
Hardware GPRS Class 10 capable
RS 232 port via 9 pin D sub-connector
Burden: 3.6VA
Optional Accessories
Optical cable for communication with meter
5 dB antenna
Dimensions
142 L X 128 B X 44.5 H mm
09
L&T Relays®
T R U L Y R E L I A B L E
L&T Provides:
l Feeder Protection Relays
l Generator Protection Relays
l Motor Protection Relays
l Transformer Protection Relays
l Voltage and Frequency Relays
l Power Factor Controllers
l Synchronizing and Load Sharing Relays
l Monitoring, Control and Supervision Relays
MC31A Three Phase Over Current MC31A is a three phase over current and Earth fault relay
and Earth Fault Relay with 4 measuring elements. This relay can be used for feeder
protection in all low voltage, medium voltage and high
voltage sub-stations. The relay has a 4 digit seven segment
LED display to read on line values, switch on values, last trip
data and settings. It provides a choice of 7 trip time
characteristics.
Features
50N, 51N
Low Set O/C and Low Set earth fault
Time characteristics NI [1.3s, 3s], VI, EI and
Definite time [1S, 10S, 100S]
1A/ 5A CT secondary (Field selectable)
Last five trip data records
Self diagnostics
Dimensions
Front bezel 158 H x 136 B, Panel cutout 142 H x 113B
Depth 224 mm
MC61A Three Phase Over Current MC61A is a three phase over current and Earth fault relay
and Earth Fault Relay with 4 measuring elements. The relay has built in high set
(instantaneous trip) protection, for both over current and
earth fault elements. The relay can be used for feeder
protection in all low voltage, medium voltage and high
voltage sub-stations. The relay has a 4 digit seven segment
LED display to read on line values, switch on values, last trip
data and settings. It provides choice of 7 trip time
characteristics.
Features
50/51, 50N/51N
Low Set O/C and Low Set earth fault
High Set O/C and High Set earth fault
Time characteristics NI, VI, EI and Definite time [1s, 10s, 100s]
Self diagnostics
Dimensions
Front bezel 158 H x 136 B, Panel cutout 142 H x 113 B
Depth 224 mm
11
PROTECTIVE RELAYS
MC61C Three Phase Over Current MC61C is a three phase over current and Earth fault relay
Earth and Fault Relay with 4 measuring elements. The relay has built in high set
(instantaneous trip) protection, for both over current and
earthfault elements. The relay has an RS485 port to link it to
SCADA system.
Features
50/51, 50N/51N
Low Set O/C and Low Set earth fault
High Set O/C and High Set earth fault
Time characteristics NI, VI, EI or Definite time
Self diagnostics
RS 485 communication
Auto doubling of High Set
Breaker Control
Dimensions
Front Bezel 158 H x 136 B, Panel Cutout 142 H x 113 B
Depth 224 mm
Features
87N/64 R
Self powered
Time characteristics – instantaneous and time delayed
CT rating 1A/5A
2 C/O contacts (Self/Reset)
Dimensions
Front Bezel 158 H x 71 B, Panel Cutout 142 H x 62 B
Depth 224 mm
ME12A Sensitive Earth Fault Relay ME12A is a non-directional, earth fault relay with one
measuring element. The relay can be used for feeder
protection in all low voltage, medium voltage and high
voltage substations. The relay has a built in high set facility.
DIP switches are provided on the front panel for pick up and
time delay settings. User has a choice of 7 trip time
characteristics.
Features
50N/51N
Low Set sensitive E/F and High Set sensitive E/F
Time characteristics NI, EI, VI, Definite Time
Harmonic rejection
2 C/O contacts (S/R)
Dimensions
Front Bezel 158 H x 71 B, Panel Cutout 142 H x 62 B
Depth 224 mm
MV12A Single Phase Over/Under MV12A is suitable for over voltage/under voltage protection
Voltage Relay schemes in LV, MV and HV power distribution systems. It is
also suitable for over voltage protection of AC circuits,
capacitors, machines such as generators, synchronous
motors and under voltage protection of AC circuits,
induction motors and automatic change over schemes.
Features
Inverse Time and Definite Time characteristics
Built -in timer
2 C/O contacts
PT input 110V/240 V (site selectable)
Dimensions
Front Bezel 158 H x 71 B, Panel Cutout 142 H x 62 B
Depth 224 mm
13
PROTECTIVE RELAYS
MRP11 Reverse Power Relay MRP11 can be used for protection of generators from
reverse power conditions or in grid islanding systems for
detecting mains failure or prevention of power flow from
small generators to grid.
Features
32
PT Input VN 110 V, 240 V
CT Input 1A/5A
1 N/O + 1 C/0 contacts
Dimensions
Front Bezel 158 H x 71 B, Panel Cutout 142 H x 62 B
Depth 224 mm
MPR300 Motor Protection Relay MPR300 is a digital motor protection relay, which can be
used to protect 3 phase, 415 V AC, 50 Hz induction motors up
to 88 A rating. The heart of MPR300 is a micro controller
circuit supported by built in CTs for measurement.
Features
Thermal overload protection (49)
Locked rotor protection (51LR)
Negative sequence protection (46)
Earth fault protection (51N)
Undercurrent protection (37)
Single phasing and no load running (46)
Built -in CTs
Dimensions
85 H X 70 B X 106 D mm
Test setups
Dry heat chamber
Rain chamber
Climatic chamber/reliability lab
Dust chamber
Electrostatic discharge simulator
Electrical fast transient simulator
Lighting surge simulator
Damped oscillator simulator
Conducted wave simulator
Vibration shaker system
AC voltage tester
Glow wire test
Insulation resistance tester
Mechanical shock simulator
Impulse voltage test
Radio interference test
Radiated susceptibility test
CT/PT tester
MMD calibrator
Magnetic test
Calibration test bench 0.01
class accuracy
15
OUR COMMITMENT TO QUALITY
”
while improving value to stakeholders
16
INTERNATIONAL SALES Lucknow Southern Region
MPS International Sales Metering & Protection Systems Bangalore
Metering & Protection Systems Larsen & Toubro Limited Metering & Protection Systems
Larsen & Toubro Limited A-28 Indira Nagar Larsen & Toubro Limited
KIADB Industrial Area Faizabad Road, Lucknow–226016 No. 38
Hebbal – Hootagalli Ph. No. (0522) 2311918 Cubbon Road
Mysore–570 018 Post Box No. 5098
Ph. No. +91 821 2405382 Western Region Bangalore–560 001
Fax No. +91 821 2402172 Mumbai Ph. No. (080) 25020341
Metering & Protection Systems Fax No. (080) 25596397
North Wing, Level-2, Gate No. 7
INDIA - SALES OFFICES
Larsen & Toubro Limited Chennai
Northern Region Powai (E), Mumbai–400 072 Metering & Protection Systems
Delhi Ph. No. (022) 67053035 Larsen & Toubro Limited
Metering & Protection Systems Fax No. (022) 67525858 Post Bag 5247
Larsen & Toubro Limited
10, Club House Road
32, Shivaji Marg Vadodara Anna Salai
P.O. Box 6223 Metering & Protection Systems Chennai–600 002
New Delhi–110 015 Larsen & Toubro Limited Ph. No. (044) 28462055
Ph. No. (011) 41419684 Radhadaya Complex Fax No. (044) 28462102
Fax No. (011) 41419600 Near Charotar Society
Old Padra Road, Baroda–390 015
Hyderabad
Chandigarh Ph. No. (0265) 2330765
Metering & Protection Systems
Metering & Protection Systems Fax No. (0265) 2336184
Larsen & Toubro Limited
Larsen & Toubro Limited
5-10-173
SCO 32 Eastern Region Fateh Maidan Road
Sector 26-D Kolkata P.O. Box 112
Madhya Marg Metering & Protection Systems Hyderabad–500 004
P.O. Box 14 Larsen & Toubro Limited Ph. No. (040) 66720318
Chandigarh–160 019 3-B, Shakespeare Sarani Fax No. (040) 23242356
Ph. No. (0172) 4646851 P.O. Box 619, Kolkata–700 071
Fax No. (0172) 4646802 Ph. No. (033) 44002450
Fax. No. (033) 22823796 DIVISIONAL OFFICE
Jaipur MPS Sales & Marketing
Metering & Protection Systems Guwahati Metering & Protection Systems
Larsen & Toubro Limited Metering & Protection Systems Larsen & Toubro Limited
D-24, Prithvi Raj Road Larsen & Toubro Limited KIADB Industrial Area
C-Scheme Milanpur Road Hebbal–Hootagalli
P.O. Box 110 Bamuni Maidan Mysore–570 018
Jaipur–302 001 Guwahati–781 021 Ph. No. (0821) 2405437
Ph. No. (0141) 2385920 Ph. No. (0361) 2550565 Fax No. (0821) 2402172
Product improvement is a continuous process. The information contained in this document is subject to change. Please contact any of our
offices for more details on our products and services.