You are on page 1of 4

Before ABT After ABT

Availability declaration DA Declared Capacity (DC)


Dispatch Instruction (DI) Sechudal Generation(SG)
Per Day + 1%
DNG No DNG part
Now UI
Availability =DI-2 DNG -UI – GEB will pay
+UI – GSEG will pay
PLF=DI + Extra Generation
PLF=DI------SG (BDL Effect)
Two part Tariff(FC+VC) Three part Tariff(FC+VC+UI)

Net UI = UI-Fuel cost

GAS Load % Load GAS Price Unit cost


GSPC 53.33% 83.2MW $ 2.81/MMBTU 1.05NHR
GSPC NICO 26.67% 41.6MW $ 4.86/MMBTU 1.81NHR
RIL 20 % Remaining MW $ 5.75/MMBTU 2.14NHR
RIL Spot 10 %(Not Remaining MW $ 10.4/MMBTU 3.87NHR
Alwas)

1 BTU = 252 Calories


Suppose Fuel Cost $ 5.8/MMBTU
Fuel Cost =$ /MMBTU*Heat Rate
=5.8/1000000*2030kcal/kwh
=(5.8*48/1000000*252)*2030*1000 in Rs.
=2.04 RS/Kwh this for RIL Cutoff FR.49.95
And RIL spot cost is 3.50 Rs. Cutoff FR.49.75

ADD UI
IF FREQ. > 49.5 Rs.0.0
49.2<FREQ. < 49.5 UI = UI+20%OF UI
FREQ. < 49.2 UI = UI+40%OF UI
ADD UI when Generation high
RATIO of GCV/NCV = 1.1
Suppose DC=135 and SG=118 If frequency is low, we can give 135 as DC
Suppose DC=135 and SG= 135 If frequency is low, we can give 1% of DC higher

Heat Rate
OLD Plant Initial 1928 Then 1950 Presently 2000kcal Cost 550 Cr
NEW Plant GEB Given 1850 We can Get 1700kcal
Reducing heat rate, merit order list to be down
Station capacity Derate is very complicated.
Gaming
6 Block - 105% (Not continues may be different block)
24hr >1% (Not given more than 1%)
Penalty- UI will become zero
Atmosphere favour you have to revise DC within 1 Hour
Effect will come from 4TH Block.
Night GT tripped revise to be done.
ST tripped do not do revise

Fixed Cost
approx 90 paisa for You have to reach >80% availability

Factor Consider
1.Debt Interest
2.Depriciation
3.Return on Equity
4.O & M
5.Interest on Capital

Earning Factor
ROE -13% from GEB
PLF Incentive >80% 25 PAISA PER UNIT
UI
Heat Rate
O & M Cost 2% (1% insurance)

DER (Debt Equity Ratio)


OLD Plant 70:30
NEW PLANT 80:20(DEBT:EQUITY)
GT LUBE OIL PURIFIER DISPLAY UNIT
XBT-RT 500 : LOW END HMI
XBTZ9780: CABLE FOR XBT OPTIMUM
VJDSNDTMSV11M: VIJEO DESIGNER LITE
MAKE :TELEMECANIQUE - TERMINAUX MAGELIS XBT-RT
REF NO.: HNP073T3KPHCY086 (LUBE OIL PURIFIER)
SR.NO. :HNPG895(LUBE OIL PURIFIER)
Dear Sir,

We have Lube oil purifier of PALL make having Sr. no: HNPG895 & Ref. no:
HNP073T3KPHCYD86. We want to down load the application program to PLC as purifier is
tripping on Low fluid level in vacuum vessel. Your purifier engineer visited to our site and
told that program reloading is required. We have programming software & application
software. But the problem is that when we are connecting the PC with PLC, “Command not
possible program in PLC is read only” message is appearing. Please tell me how we can
communicate with PC & solve the problem. Please send me the telephone no. of your PLC
engineer in India so we can communicate with him.

Thanking You,

Vinod J. Patel
Dear Sir,

Thank you very much for providing us authorization code within a short time.
Now I am facing new problem while connecting the PC with PLC. We have TSX
micro PLC (TSX3721 DC) installed for our lube oil purifier. “Command not
possible, Application in PLC is read only” message is appearing while giving the
connect command.

Please tell me how I can connect the PLC with PC? If possible please give your
mobile number so we can communicate you directly.

Thanking You,

Vinod J. Patel
-----Original Message-----
From: manoj.gupta2@in.schneider-electric.com
[mailto:manoj.gupta2@in.schneider-electric.com] On Behalf Of in-
care@in.schneider-electric.com
Sent: Wednesday, October 10, 2007 1:21 PM
To: Vinod J Patel (STEAG)
Cc: S V Shah (STEAG)
Subject: RE: Authorisation of PC for PL7 software

Dear Mr. Vinod ,

Thanks for your inquiry placed at IN-Care.


Authorization Code is 27638539.
Find the attachment for the same.

Assuring you the best of our services.

If you are not satisfied with the Quality of response, Please mail to Mr.
Mohd. Shohaib and Mr. Mohan Shankar, The Team Leaders CCC, at
mohd.shohaib@in.schneider-electric.com &
mohan.shankar@in.schneider-electric.com respectively.

Thanks and Regards

Manoj Gupta
Schneider Electric (India) Pvt. Limited
Plot No. A - 4, Mohan Co-operative Industrial Estate,
Mathura Road, New Delhi - 110 044
INDIA

Phone: 0091 11 4259 0000 (Board)


Fax: 0091 11 4259 0088

TollFree: 1800 111 341 (BSNL/MTNL)


1800 103 0011 (Airtel)

email: in-care@in.schneider-electric.com
website: www.in.schneider-electric.com

You might also like