You are on page 1of 2

Data sheet 206A

SIKACIM® HYDROFUGE
Liquid waterproofing compound for concretes and mortars

Description
SIKACIM HYDROFUGE is a ready-for-use chlorine-free brown aqueous solution.

General characteristics
• Makes concretes and mortars watertight by plugging the capillaries through crystallisation
with cement lime.
• Does not modify setting and mechanical strengths of concretes and mortars.
• Compatible with other SIKACIM products. Do not pre-mix them.
• Compatible with any types of cement including cement-lime mixes but excluding aluminous
cements.

Applications
• Concretes for foundations, sole plates, reservoirs.
• Facade dressing, basins.
• Waterproof blanket
• Levelling surface preparation.

Ph and Ch (and mechanical) characteristics


• Density: 1,02
• Crystal point: 0°C
• Ion chloride content: < 1 g/l
• pH: 8

Packaging
0,5-litre dose

Storage and shelf-life


SIKACIM HYDROFUGE stored away from freezing in a cool place and in its original
packaging has a one-year storage life.
CAUTION: product destroyed by the frost.

Consumption
1 0,5-litre dose / bag of 50 kg of cement.

Directions for use


SIKACIM HYDROFUGE is added to the mixing water.

1
SIKACIM® HYDROFUGE

Important considerations
In case of contact with the skin, rinse immediately.
Consult data sheet on Minitel 3613, code SIKASECUR or on Internet http://www.sika.fr
(free service).

This english version is a translation of the reference french data sheet

Product for strictly professional use only. «The information, and, in particular, the arising out of any legal relationship whatsoever,
«The product described in this data sheet is covered recommandations relating to the application and can be inferred either from this information, or
under the manufacturer’s product liability policy».
end-use of SIKA products, are given in good from any written recommendations, or from any
faith based on SIKA’s current knowledge and other advice offered. The proprietary rights of
experience of the products when properly stored, third parties must be observed. All orders are
handled and applied under normal conditions. accepted subject to our current terms of sale
In practice, the differences in materials, and delivery. Users should always refer to the
SIKA S.A. : Export Department substrates and actual site conditions are such most recent issue of the french version of the
1 0 1 , r u e d e T o l b i a c
75654 PARIS Cedex 13 - France that no warranty in respect of merchantability or Technical Data Sheet for the produt concerned,
Tél.: +33 1 53 79 79 60 - Fax : +33 1 53 79 79 69 of fitness for a particular purpose, nor any liability copies of which will be supplied on request».

Version 1 - April 2001. 2

You might also like