Professional Documents
Culture Documents
v01.0314
• Basestation Infrastructure
Single Positive Control: 0/+5V
• MMDS & 3.5 GHz WLL
+53 dBm Input IP3
• CATV/CMTS
Non-Reflective Design
• Test Instrumentation
All Off State
General Description
The HMC349ALP4CE is a high isolation non-reflective
DC to 4 GHz GaAs MESFET SPDT switch in a low cost
leadless surface mount package. The switch is ideal
for cellular/PCS/3G basestation applications yielding
60 to 65 dB isolation, low 0.9 dB insertion loss and
+53 dBm input IP3. Power handling is excellent
up through the 3.5 GHz WLL band with the switch
offering a P1dB compression point of +31 dBm. On-
chip circuitry allows a single positive voltage control of
0/+5 Volts at very low DC currents. An enable input
(EN) set to logic high will put the switch in an “all off”
state.
Electrical Specifications, TA = +25° C, Vctl = 0/+5 Vdc, Vdd = +5 Vdc, 50 Ohm System
Parameter Frequency Min. Typ. Max. Units
DC - 1.0 GHz 60 67 dB
Isolation (RFC to RF1/RF2)
DC - 4.0 GHz 55 62 dB
DC - 2.0 GHz 22 dB
Return Loss (On State) DC - 3.0 GHz 20 dB
DC - 4.0 GHz 17 dB
Return Loss (Off State) 0.5 - 4.0 GHz 20 dB
Input Power for 1 dB Compression 0.25 - 4.0 GHz 30 34 dBm
Input Third Order Intercept
0.25 - 4.0 GHz 53 dBm
(Two-Tone Input Power = +10 dBm Each Tone)
Switching Speed DC - 4.0 GHz
-4
-25
-5 -30
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
FREQUENCY (GHz) FREQUENCY (GHz)
-10 -10
-20
-20
-30
ISOLATION (dB)
ISOLATION (dB)
-30
-40
-40
-50
-50
-60
-60
-70
-80 -70
-90 -80
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
FREQUENCY (GHz) FREQUENCY (GHz)
0.1 and 1 dB Input Compression Point Input Third Order Intercept Point
36 64
34
60
INPUT COMPRESSION (dBm)
32
56
30
IP3 (dBm)
28 52
26
48
24
44
22
20 40
0 1 2 3 4 0 1 2 3 4
FREQUENCY (GHz) FREQUENCY (GHz)
Through Path +33.6 dBm (T = 85 °C) Vdd Idd (Typ.) Idd (Max.)
+28 dBm (T = 125 °C) (Vdc) (mA) (mA)
+26.5 dBm (T = 85 °C) +5.0 1.0 3.5
Termination Path +21 dBm (T = 125 °C)
Outline Drawing
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
[2] H349A
HMC349ALP4CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Pin Descriptions
Pin Number Function Description Interface Schematic
Switches - SPDT - SMT
Evaluation PCB