Professional Documents
Culture Documents
PROJECT:
TITLE :
DESIGN PARAMETERS
F'c = 34.48 MPa = 5.00 ksi
Fy = 413.70 MPa = 60.00 ksi
Length (L) = 3.00 m
Minimum thickness of slab if
Simply supported (L) = 150.00 mm ~ 150.00 mm
One end continous (L) = 125.00 mm ~ 150.00 mm
Both ends continous (L) = 107.14 mm ~ 125.00 mm
Cantilever (L) = 300.00 mm ~ 300.00 mm
Diameter of bar = 12.00 mm
Depth (d) = 94.00 mm
t = 120.00 mm
b = 1,000.00 mm
LOADINGS
Dead Load
Imposed load (Factored) = 6.05 KPa 1.4 4.32 30
Live Load (Factored) = 8.16 KPa 1.7 4.80 100
Required rho
rho required @ midspan = 0.00503763
rho required @ continous end = 0.00399972
rho required @ discontinous end = 0.00283293
adopt
@ midspan = 12.00 mm @ 225.00 mm
@ continous end = 12.00 mm @ 300.00 mm
@ discontinous end = 12.00 mm @ 300.00 mm
DEFLECTION CHECK: ADEQUATE
ALLOWABLE: 12.5
ACTUAL: 4.84
E: 27596.2452156086
I: 0.000072
LONG SPAN
REMARKS
DISCONT MIDSPAN CONT
A
DESIGN OF ONE WAY SLAB ONE END CONTINUOUS
PROJECT:
TITLE :
DESIGN PARAMETERS
F'c = 34.48 MPa = 5.00 ksi
Fy = 413.70 MPa = 60.00 ksi
Length (L) = 3.50 m
Minimum thickness of slab if
Simply supported (L) = 175.00 mm ~ 200.00 mm
One end continous (L) = 145.83 mm ~ 150.00 mm
Both ends continous (L) = 125.00 mm ~ 150.00 mm
Cantilever (L) = 350.00 mm ~ 350.00 mm
Diameter of bar = 12.00 mm
Depth (d) = 124.00 mm
t = 150.00 mm
b = 1,000.00 mm
LOADINGS
Dead Load
Imposed load (Factored) = 7.06 KPa 1.4 5.04 30
Live Load (Factored) = 8.16 KPa 1.7 4.80 100
Required rho
rho required @ midspan = 0.00236510
rho required @ continous end = 0.00333433
rho required @ discontinous end = 0.00136985
adopt
@ midspan = 12.00 mm @ 300.00 mm
@ continous end = 12.00 mm @ 250.00 mm
@ discontinous end = 12.00 mm @ 300.00 mm
DEFLECTION CHECK: ADEQUATE
ALLOWABLE: 14.58333333 mm
ACTUAL: 4.95 mm
E: 27596.24522 MPa
I: 0.000140625 m4
PROJECT:
TITLE :
DESIGN PARAMETERS
F'c = 34.48 MPa = 5.00 ksi
Fy = 413.70 MPa = 60.00 ksi
Length (L) = 4.18 m
Minimum thickness of slab if
Simply supported (L) = 209.00 mm ~ 225.00 mm
One end continous (L) = 174.17 mm ~ 175.00 mm
Both ends continous (L) = 149.29 mm ~ 150.00 mm
Cantilever (L) = 418.00 mm ~ 425.00 mm
Diameter of bar = 12.00 mm
Depth (d) = 99.00 mm
t = 125.00 mm
b = 1,000.00 mm
LOADINGS
Dead Load
Imposed load (Factored) = 6.22 KPa 1.4 4.44 30
Live Load (Factored) = 8.16 KPa 1.7 4.80 100
Required rho
rho required @ midspan = 0.00444125
rho required @ continous end = 0.00656137
rho required @ discontinous end = 0.00656137
adopt
@ midspan = 12.00 mm @ 250.00 mm o.c.
THICKNESS
@ continous end = 12.00 mm @ 150.00 mm o.c.
@ discontinous end = 12.00 mm @ 150.00 mm o.c. 125
DEFLECTION CHECK: ADEQUATE
ALLOWABLE: 17.41666667 mm
ACTUAL: 16.35 mm
E: 27596.24522 MPa
I: 8.13802E-05 m4
LOADINGS
Dead Load
Total dead loads = 5.38 KPa 1.4 3.84 30
Live Load = 8.16 KPa 1.7 4.80 100
Check shear
Shear(long beam) actual = 27.07 KN/m ###
Shear(short beam) actual = 27.07 KN/m ###
Steel Reinforcement
Rho along long direction
@ midspan = 0.007720 ###
@ continous end = 0.000000 ###
@ discontinous end = 0.002510 ###
Adopt
As along long direction
@ midspan = 10.00 mm @ 156.51 mm
@ continous end = 10.00 mm @ 436.33 mm
@ discontinous end = 10.00 mm @ 436.33 mm
PROJECT:
TITLE :
DESIGN PARAMETERS
F'c = 34.48 MPa = 5.00 ksi
Fy = 413.70 MPa = 60.00 ksi
Length (L) = 1.80 m
Minimum thickness of slab if
Simply supported (L) = 90.00 mm ~ 100.00 mm
One end continous (L) = 75.00 mm ~ 100.00 mm
Both ends continous (L) = 64.29 mm ~ 75.00 mm
Cantilever (L) = 180.00 mm ~ 200.00 mm
Diameter of bar = 12.00 mm
Depth (d) = 124.00 mm
t = 150.00 mm
b = 1,000.00 mm
LOADINGS
Dead Load
Imposed load (Factored) = 7.06 KPa 1.4 5.04 30
Live Load (Factored) = 8.16 KPa 1.7 4.80 100
Required rho
rho required @ midspan = 0.00054027
rho required @ continous end = 0.00444518
rho required @ discontinous end = 0.00035972
adopt
@ midspan = 12.00 mm @ 300.00 mm
@ continous end = 12.00 mm @ 200.00 mm
@ discontinous end = 12.00 mm @ 300.00 mm
DEFLECTION CHECK: ADEQUATE
ALLOWABLE: 7.5 mm
ACTUAL: 3.33 mm
E: 27596.24522 MPa
I: 0.000140625 m4
S-1 125 12 300 200 150 Ø10 @ 300 Ø10 @ 300 Ø10 @ 300
S-2 125 12 300 200 150 --- Ø10 @ 300 Ø10 @ 300
S-3 125 12 --- 225 150 Ø10 @ 300 Ø10 @ 300 Ø10 @ 300
S-4 125 12 --- 225 150 --- Ø10 @ 300 Ø10 @ 300
S-5 175 16 300 275 200 Ø12 @ 300 Ø12 @ 300 ---
S-6 175 16 300 275 200 --- Ø12 @ 300 Ø12 @ 300
S-7 175 16 300 275 200 Ø12 @ 300 Ø12 @ 300 Ø12 @ 300
S-11 125 12 300 225 --- --- Ø10 @ 300 Ø10 @ 300
S-12 125 12 300 225 --- Ø10 @ 300 Ø10 @ 300 Ø10 @ 300
S-20 175 16 300 225 150 Ø12 @ 300 Ø12 @ 300 ---
S-21 175 16 --- 250 175 Ø12 @ 300 Ø12 @ 300 Ø12 @ 300
S-22 150 16 300 225 150 --- Ø12 @ 300 Ø12 @ 300
S-24 175 16 300 250 175 Ø12 @ 300 Ø12 @ 300 Ø12 @ 300
S-25 175 16 --- 300 200 Ø12 @ 300 Ø12 @ 300 Ø12 @ 300
S-26 175 16 --- 300 200 --- Ø12 @ 300 Ø12 @ 300
C - CANTILEVER SLAB
A
A