You are on page 1of 7

HEAVY DUTY

FLAP VALVE PUMPS OUR SIGNATURE


For Fluids Containing up to Line Size Solids ENSURES YOUR SUCCESS

A WARREN RUPP, INC. BRAND | SANDPIPERPUMP.COM


KEY ADVANTAGES OF SANDPIPER HEAVY DUTY FLAP VALVE PUMPS
AN IDEAL SOLUTION FOR ABRASIVE SLURRIES, SUSPENDED AND NON-SUSPENDED SOLIDS AND LINE SIZE SOLIDS REQUIREMENTS

LINE SIZE SOLIDS SUPERIOR SUCTION LIFT


FLAP VALVE VS. BALL VALVE PUMPS FLAP VALVE VS. BALL VALVE PUMPS

Flap Check Valve Pumps Suction Lift Advantage


Have a large flow area to allow up to line size solids to pass SANDPIPER’s Flap Valve design provides for superior
directly through the pump. Additionally, the bottom discharge suction lift capabilities up to 24 feet in water. Diaphragm
design helps prevent these solids from settling in the unit. placement and flap valve seating combine to create a unit
capable of suction lifts 15% greater than Ball Valve pumps.
Ball Check Valve Pumps
Have much less flow area for solids to pass through. Large These capabilities are from a dry prime, making the
solids get stuck in the suction manifold and small solids can SANDPIPER Flap Valve Pump an excellent solution,
settle in the outer chamber, affecting pump performance. in situations where limited choices are available for
pump priming.

EASE OF MAINTENANCE EASE OF MAINTENANCE


METALLIC PUMPS NON-METALLIC PUMPS

Quick Access to Serviceable Components Quick Access to Serviceable Components


To help increase productivity and reduce downtime. To help increase productivity and reduce downtime.

Removable Elbows Remove Clean-Out Cap


By removing the bolts that secure the elbows, it allows By simply removing six bolts securing
access to clear simple clogs without disassembling the the clean-out cap in place, it allows
entire pump. access to clear simple clogs without
disassembling the entire pump.
Flap Check Valves Flap Check Valves
With the elbows removed, the flap valves can be With the clean-out cap removed, the
inspected and/or replaced as needed. flap valves can be inspected and / or
replaced as needed. Four bolts hold
the modular flap valves in place
for quick maintenance and repair.

2 E N G I N E E R E D P U M P I N G S O L U T I O N S W I T H M O R E WAY S T H A N O N E S A N D P I P E R P U M P. C O M 3
FEATURES & BENEFITS - METALLIC
Thick Manifold and Chamber Walls Dynamic Manifold Connections
Greater wear resistance when pumping solids and Allow suction and discharge manifolds
solid laden slurries, providing extended service life to be positioned in various directions

Stainless Steel Seats Flap Valve Construction


Provide long-lasting abrasion resistance Can pass up to line size solids,
and solids handling durability enabling extended suction lift capabilities

Robust Diaphragm Connecting Rod Diaphragm Wear Pads


Guaranteed not to bend or break; assures reliable Extend the life of the diaphragm by reducing
and consistent diaphragm operation the frictional stresses associated with the outer
diaphragm plate during operation

Cross-Drilled Directional Spool Valve All Bolted Construction


Guarantees the pump will not stall Ensures sealing forces are applied evenly
and ensures on/off reliability across the pump for leak-free operation

Easy Access To Flap Valves Externally Serviceable Air Distribution System


Check Valve Flaps can be quickly cleaned Allows for quick and easy access to the main air drive
or replaced without removing the pump components without disassembly of the entire pump
from service and / or removing it from service

Heavy Duty Actuator Plungers Top Suction, Bottom Discharge Porting


Ensures reliable pilot valve operation Easier evacuation of fluids containing
large solids and settling materials

4 E N G I N E E R E D P U M P I N G S O L U T I O N S W I T H M O R E WAY S T H A N O N E S A N D P I P E R P U M P. C O M 5
HEAVY DUTY FLAP VALVE PUMPS - METALLIC
P ERFORMANCE & S P E CIF ICA TIO NS

SPECIFICATIONS PUMP CHARACTERISTICS Metallic 2”


50mm
HDF2 Metallic
Water 3
SIZES MAX FLOW SOLIDS HANDLING MAX FLOW MAX PRESSURE DISPLACEMENT
1 - 4" 70 - 260 GPM
Suspended Solids 3 Up to 2” (50 mm) 140 GPM (530 LPM) 125 psi (8.6 bar) 0.50 gallon (1.9 liter)
25.4 - 101.6mm 265 - 984 LPM Non-Suspended Solids 3
3

Fluid Characteristics
SOLIDS HANDLING DISPLACEMENT Line Size Solids OPTIONS
1 - 3” 0.10 - 1.5 gallon
25.4 - 75mm 0.37 - 5.7 liter
Sludge / Slurry 3 Porting Wet End Elastomers Air End

High Viscosity (Flowable Fluids) 3 2” NPT / BSP Threaded Aluminum Nitrile (Buna) Fluorocarbon (FKM) Aluminum
High 3 Cast Iron Neoprene EPDM Cast Iron
Erosion /
3 Stainless Steel Hytrel Urethane
®
Moderate
COMPOSITE PERFORMANCE CURVE Abrasive Fluids
Santoprene®
Low 3
100 PSI
6.9 BAR
Corrosion 3
Permanent 3
HDF3-A / 4-A Metallic
VARIABLE HEAD (PSI / BAR)

80 / 5.5
3-4”
Portable 3 75-102mm

!
Installation

60 / 4.1
Containment / Prevention
SOLIDS HANDLING MAX FLOW MAX PRESSURE DISPLACEMENT
40 / 2.8 Flooded Suction 3 Up to 3” (75 mm) 260 GPM (984 LPM) 125 psi (8.6 bar) 1.5 gallon (5.7 liter)

20 / 1.4
Suction Lift 3
OPTIONS
Submerged
3
Porting Wet End Elastomers Air End
0 40 / 151 80 / 303 120 / 454 160 / 606 200 / 757 240 / 908 Intermittent / On-Demand
3
Duty

VARIABLE CAPACITY (GPM / LPM)


Continuous 3 3” ANSI Flange Aluminum Nitrile (Buna) EPDM Aluminum

3= Best 3= Suited ! = Limitations = Use listed pump


4” ANSI Flange Neoprene

Santoprene®
Urethane

For more detailed Performance and Specification information, please visit SANDPIPERPUMP.COM

1”
25mm
HDF1 Metallic 3-4”
75-102mm
HDF3-M / 4-M Metallic
SOLIDS HANDLING MAX FLOW MAX PRESSURE DISPLACEMENT SOLIDS HANDLING MAX FLOW MAX PRESSURE DISPLACEMENT
Up to 1” (25.4 mm) 70 GPM (265 LPM) 125 psi (8.6 bar) 0.10 gallon (.37 liter) Up to 3” (75 mm) 260 GPM (984 LPM) 125 psi (8.6 bar) 1.2 gallon (4.5 liter)

OPTIONS OPTIONS
Porting Wet End Elastomers Air End Porting Wet End Elastomers Air End

1” NPT / BSP Threaded Aluminum Nitrile (Buna) Fluorocarbon (FKM) Aluminum 3” ANSI Flange Cast Iron Nitrile (Buna) EPDM Cast Iron
Cast Iron Neoprene EPDM Cast Iron 4” ANSI Flange Neoprene Urethane
Stainless Steel Hytrel® Urethane Santoprene®
Santoprene®
® ®
Santoprene is a registered tradename of Exxon Mobil Corp. Hytrel is a registered trademark of E.I. du Pont de Nemours and Company.

6 E N G I N E E R E D P U M P I N G S O L U T I O N S W I T H M O R E WAY S T H A N O N E S A N D P I P E R P U M P. C O M 7
FEATURES & BENEFITS - NON-METALLIC
Lightweight & Durable Stainless Steel Hanging Brackets
The non-metallic, lightweight design makes Stainless steel hanging points located on the
it easily portable at 53 lbs (24 kg) manifold allow for multiple mounting options

Robust Diaphragm Connecting Rod Dynamic Manifold Connections


Guaranteed not to bend or break; assures reliable Allow suction and discharge manifolds to be
and consistent diaphragm operation positioned in various directions

Stainless Steel Seats Ergonomic Handle


Provide long-lasting abrasion resistance Lifting handles come standard, allowing for easy
and solid handling durability pump transport; handles can be rotated 90 degrees
for proper ergonomics, depending on desired use

Easy Access To Flap Valves All Bolted Construction


Check Valve Flaps can be quickly cleaned Ensures sealing forces are applied evenly
or replaced without removing the pump across the pump for leak-free operation
from service

Diaphragm Wear Pads Versatile Design


Extend the life of the diaphragm by reducing This pump will function in most positions,
the frictional stresses associated with the outer including uneven surfaces
diaphragm plate during operation

Externally Serviceable Air Distribution System Purpose Built Base


Allows for quick and easy access to the main air drive The threaded port version features stainless steel
components without disassembly of the entire pump mounting feet and the flanged port version features
and / or removing it from service Polypropylene mounting feet

8 E N G I N E E R E D P U M P I N G S O L U T I O N S W I T H M O R E WAY S T H A N O N E S A N D P I P E R P U M P. C O M 9
HEAVY DUTY FLAP VALVE PUMPS - NON-METALLIC PARTS & ACCESSORIES
P ERFORMANCE & S P E CIF ICA TIO NS EVERYT H I N G YOU N EED T O C OM P LET E YOUR P UM P S YS T EM

SPECIFICATIONS PUMP CHARACTERISTICS Non-Metallic SANDPIPER GENUINE PARTS SERVICE KITS


WET END KITS / A IR END KITS
Water 3 SANDPIPER is pleased to offer you the trusted Genuine Parts you need, sold in convenient
SIZES MAX FLOW
2" 150 GPM
Suspended Solids 3 kits or individual parts. Whatever you need to make pump repairs, we have you covered.
50mm 568 LPM Non-Suspended Solids 3
Wet End Kits
3

Fluid Characteristics
SOLIDS HANDLING Line Size Solids
DISPLACEMENT
1.8” ●● Diaphragms
0.50 gallon
46mm 1.9 liter
Sludge / Slurry 3 ●● Flaps
High Viscosity (Flowable Fluids) 3 ●● Seats
High 3 Air End Kits
Erosion /
COMPOSITE PERFORMANCE CURVE Abrasive Fluids
Moderate 3 ●● Gaskets
Low 3 ●● O-Rings
100 PSI
6.9 BAR
Corrosion 3 ●● Seals
●● Retaining Rings
Permanent 3
VARIABLE HEAD (PSI / BAR)

80 / 5.5
●● Air Valve Sleeve and Spool
Portable 3 ●● Pilot Valve Assembly
!
Installation

60 / 4.1
Containment / Prevention ●● Lubricant

40 / 2.8 Flooded Suction 3


Suction Lift 3 AIR FILTER / REGULATORS
RELIA BLE FILTER / REGU LA TORS S P ECIFICA LLY D EVELOP ED FOR A OD D P U MPS
20 / 1.4

Submerged
3 ●● Adjust and lock to deliver constant air pressure
0 40 / 151 80 / 303 120 / 454 160 / 606 200 / 757 240 / 908 Intermittent / On-Demand
3 ●● Polyurethane bowl offers improved chemical resistance
Duty

VARIABLE CAPACITY (GPM / LPM)


Continuous 3 ●● Include a durable liquid filled pressure gauge to dampen the effects of pulsation and vibration

3= Best 3= Suited ! = Limitations = Use listed pump


●● Integral mounting slots eliminate the need for mounting brackets
●● Automatic drain removes condensate

For more detailed Performance and Specification information, please visit SANDPIPERPUMP.COM
TRANQUILIZERS®
P U LS A TION D A M P ENERS / S U RGE S U P P RES S ORS
●● Provide virtually surge-free flow
2” HD20F Non-Metallic Performance
50mm ●● Steady pressure
●● Less vibration and noise
SOLIDS HANDLING MAX FLOW MAX PRESSURE DISPLACEMENT ●● Automatically self-charging and self-venting
1.8” (46mm) 150 GPM (568 LPM) 100 psi (7.0 bar) 0.50 gallon (1.9 liter) ●● Protect other system components
●● Long-life balanced diaphragm
OPTIONS
Porting Wet End Elastomers Air End LIQUID LEVEL CONTROL
AUTOMATIC, FLOAT ACTUATED UNIT OPENS AND CLOSES AIR SUPPLY TO YOUR AODD PUMP
2” NPT / BSP Threaded Polypropylene Nitrile (Buna) Fluorocarbon (FKM) Polypropylene

2” ANSI / DIN Stainless Steel Neoprene EPDM


●● Pneumatic operation requires no electricity
Combination Flange (Seats only) ●● Adjustable operating range from a few inches to 9 feet (2.7 meters)
Hytrel® Urethane
●● Simple design is easy to install and operate, with few moving parts
Santoprene®
●● Reversible operation capable
® ®
Santoprene is a registered tradename of Exxon Mobil Corp. Hytrel is a registered trademark of E.I. du Pont de Nemours and Company.

10 E N G I N E E R E D P U M P I N G S O L U T I O N S W I T H M O R E WAY S T H A N O N E S A N D P I P E R P U M P. C O M 11
SANDPIPER’S EXTERNALLY SERVICEABLE
AIR DISTRIBUTION SYSTEM (ESADS+ PLUS)
SANDPIPER’s Externally Serviceable Air Distribution System (ESADS) allows for quick and easy access
to the pilot and spool valves without removing the pump from service, maximizing up time!

SANDPIPER COMPETITORS
VS
CLUSIVE
EX

FE
AT U R E

The Air Motor's


Pilot Valve is the
Most Often
Serviced Part on
an AODD Pump

5 55
5 MINUTES FOR MAINTENANCE / CLEANING 55 MINUTES OR LONGER FOR MAINTENANCE / CLEANING
Accomplished in minutes without removing pump The air valve components can only be accessed by removing
from service by removing only 4 bolts the pump from service and taking it entirely apart

$ $$$
Saves you money by minimizing downtime Costs you money due to extended downtime

Contact Your Local Distributor to Place Your Order:

Warren Rupp, Inc. | A Unit of IDEX Corporation


800 North Main Street, Mansfield, OH 44902 USA
Phone: 419.524.8388 | Fax: 419.522.7867
SANDPIPERPUMP.COM

©Copyright 2017 Warren Rupp, Inc. All Rights Reserved. SP_HDFSalesSheet-rev0117

You might also like