Professional Documents
Culture Documents
Up to 250 MW
The SST-900 is a steam turbine with inherent flexibility. Each turbine is built from a series of proven standard components,
each of which contributes to high reliability and availability. The combination of standard components, such as inlet
and exhaust sections, results in a very versatile turbine, covering a wide field of applications and a broad power range.
Turbine modularity
Intermediate
Inlets Exhausts
turbine sections
Back-
pressure
exhaust
Standard modules:
Turbine casing
Condensing
Exhausts casings
exhausts Exhaust
Four-flow inlet
Generator
Customized modules:
Steam path (impulse blading)
Axial
Dual-flow inlet Optional:
Double extraction
Single-flow Exhaust
inlet areas Radial
1.7–11 m2
(18.3–118 sq ft)
Technical data
Power output up to 250 MW
Speed 3,000 –3,600 rpm
Live steam conditions (non-reheat)
Pressure up to 140 bar / 2,030 psi
Temperature up to 560° C /1,040° F
Live steam conditions (reheat)
Pressure up to 165 bar / 2,393 psi
Temperature up to 585° C /1,085° F
Reheat temperature up to 580° C /1,080° F
Bleed up to 60 bar / 870 psi
Controlled extraction (single or double)
Pressure up to 55 bar / 798 psi
Temperature up to 480° C / 895° F
Exhaust steam conditions
Back pressure up to 16 bar / 230 psi
Condensing up to 0.6 bar / 8.5 psi
District heating up to 3 bar / 45 psi
(All data are approximate and project-related.)
3
10m/33ft*
2 4
5
7
f t*
m / 67
6 2 0.5
11m
/ 36
f t* SST-900 steam turbine in the workshop
in Finspong, Sweden.
* The dimensions are typical figures, they can vary from case to case.
Installation and maintenance
Our proven installation and maintenance concept lowers maintenance cost by enabling easy access to the installed
components – the turbine, generator and auxiliaries.
Reference examples
SST-900 has been sold for a rich variety of applications around the world. The following references
exemplify this versatility of application.
The Rya CHP plant in Gothenburg, Sweden, is powered by three In the Walnut Energy Center CCPP in Turlock, California, a 100 MW
SGT-800 gas turbines and one 137 MW SST-900 steam turbine. SST-900 dual-casing steam turbine in reheat configuration uses
the heat from two gas turbines.
Published by and copyright © 2009: Siemens Energy, Inc. Oil & Gas Division All rights reserved. Trademarks mentioned in
Siemens AG 10730 Telge Road Order No. E50001-W410-A109-X-4A00 this document are the property of Siemens AG,
Energy Sector Houston, Texas 77095, USA Printed in Germany its affiliates, or their respective owners.
Freyeslebenstrasse 1 Dispo 05400 c4b: 1387
For more information, contact our Subject to change without prior notice.
91058 Erlangen, Germany P WS 09093.
Customer Support Center. The information in this document contains
Siemens AG, Energy Sector Phone: +49 180/524 70 00 Printed on elementary chlorine-free general descriptions of the technical options
Oil & Gas Division Fax: +49 180/524 24 71 bleached paper. available, which may not apply in all cases.
Wolfgang-Reuter-Platz (Charges depending on provider) The required technical options should
47053 Duisburg, Germany e-mail: support.energy@siemens.com therefore be specified in the contract.
www.siemens.com / energy