Professional Documents
Culture Documents
License level 3
The box includes a wall mounting kit, straps for pole mounting and also a pair of table stands for
using the devices indoors. Penetrates some windows depending on material. For more products and
information please visit mikrotik.com!
2 3
SXTsq Lite5 SXTsq Lite5
License level 3
Wireless specifications
RATE (5 GHz) Tx (dBm) Rx (dBm)
6MBit/s 25 -96
QuickMount Pro adjustable
54MBit/s 20 -80 mount available separately.
MCS0 25 -96
MCS7 19 -75
24 V 0.38 A Power Metal ring PoE injector
adapter
4 5
LHG series LHG series
mW, and is designed to reach up to 60% longer distances. CPU nominal frequency 600 MHz
Size of RAM 64 MB
Storage 16 MB Flash
Antenna gain 24.5 +/- 0.5 dBi 24.5 +/- 0.5 dBi 27 +/- 0.5 dBi
Return loss 10 dB 12 dB 14 dB
LHG XL HP5 LHG HP5 LHG 5
VSWR 1.925:1 1.6:1 1.5:1
PoE in Yes
The LHG XL HP5 has a bigger 27 dBi antenna with 630 mW TX output power, designed to reach up to 40 km Supported input voltage 11 V - 30 V (passive PoE) 10 V - 28 V (passive PoE)
in point-to-point setups at full speed, see the graphs for more information.
Wind loading 186N @ 205 km/h
All units come with a PoE injector, power supply and pole mount, ready Operating temperature -40 to 70° C
to be deployed.
Operating humidity 5 to 95% noncondensing
Wireless specifications
Model LHG 5 LHG HP5 LHG XL HP5
24 V 0.38 A 2x metal rings
Power adapter RATE Tx (dBm) Rx (dBm) Tx (dBm) Rx (dBm) Tx (dBm) Rx (dBm)
6 7
wAP LTE kit wAP LTE kit
supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and CPU QCA9531
access the LTE network from your phone or any other wireless device. The wAP LTE also has one
CPU nominal frequency 650 MHz
10/100 Ethernet LAN port for your wired devices.
CPU core count 1
house, in the vehicle, on your porch or anywhere else where 10/100 Ethernet ports 1
you need wireless access from your phone or computer. It
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
also includes a desktop stand so you can put it inside the
building near a window. Wireless antenna gain 2 dBi
RBwAPr-2nD is shipped with without LTE card installed Included License level 4
(empty miniPCI-e slot), so you can use your own LTE card. Operating system RouterOS
3G bands 2(1900)/5(850)
8 9
RB1100AHx4 series RB1100AHx4 series
10 11
CRS317-1G-16S+RM CRS317-1G-16S+RM
CRS317-1G-16S+RM Specifications
The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it
Product code CRS317-1G-16S+RM
has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.
CPU 98DX8216B0 800 MHz
CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for
all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree CPU cores 2
Protocol (MSTP) and Link Aggregation (LACP) provide enhanced protection and true professional performance Size of RAM 1 GB
for your demanding network.
Storage type Flash
The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hot
Storage size 16 MB
environments, like outdoor communications boxes, two redundant fans will automatically keep the system cool
if needed. 16 (supports both 1.25 Gb SFP and 10 Gb SFP+ modules; modules are not
SFP+
included), DDMI support
Dimensions 443 x 224 x 44 mm
License level 6
Number of AC inputs 2
“Dual boot” feature allows you to choose which operating system you prefer to use, RouterOS or SwOS. If
you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used
to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS,
boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the
RouterBOOT loader settings.
It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port
forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some
MAC and IP header fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
12 13
CRS326-24G-2S+RM M11G
CRS326-24G-2S+RM M11G
We are announcing a special version of the CSS326-24G-2S+RM switch, with added RouterOS as a second boot option,
the new CRS326-24G-2S+RM. The M11G is a fully featured RouterBOARD device
perfect for using with your own enclosure or
This is a SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with building a custom solution. It uses the same square
several new switching features! PCB and mounting holes as it’s predecessors, you
can simply swap out the older models with the
It has an additional CPU unit that allows you to run the the RouterOS operating system on this device, for those who
prefer the RouterOS GUI interface to configure switching features. This new switch is also capable to work in routing brand new M11G.
mode for a few configurable ports.
The M11 features a new MediaTek dual core CPU
The “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you running at 880MHz, a miniPCIe slot for using
prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and with a WiFi module of your choice, or with a 3G/
would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You
can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. LTE modem (SIM slot provided). The device can
be powered by PoE through it’s Gigabit Ethernet
It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply connector or through the DC power jack.
MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
License level 4
14 15
FiberBox FiberBox
FiberBox Specifications
The FiberBox is an outdoor router with five SFP ports, ideal for locations where distance is restricting Product code FiberBox
the use of regular Ethernet cables. The device is weatherproof and comes with a hose clamp and zip
ties, ready to be installed on high masts and towers. CPU QCA8511 400 MHz
Storage size 16 MB
5x 1.25G Ethernet SFP cage (Mini-GBIC); DDMI
SFP supported.
One S-RJ01 Rj45 SFP module included.
Dimensions 125 x 178 x 48 mm
License level 5
Included
The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port,
so you can use Ethernet in one of the ports already out of the box. If not needed, remove it to have
access to all five SFP ports for using with 1.25G fiber modules.
24 V 0.8 A power 2x plastic zip ties Hose clamp Dinrail mounting S-RJ01 R45 SFP
adapter bracket set (K-27) module
16 17
PowerBox Pro PowerBox Pro
Memory size 16 MB
SFP 1
PoE in Yes
Supported input voltage 12 -57 V
Ports 2 - 5, 802.3af/at, max 1 A per port (input < 30 V), max
PoE out
450 mA per port (input > 30 V), max out total: 2 A
PCB temperature monitor Yes
License level 4
The device has a SFP port for adding optical fiber Included
connectivity. It is affordable, small and easy to use,
but at the same time comes with a very powerful
800 MHz CPU, capable of all the advanced
confgurations that RouterOS supports.
24 V 2.5 A power Mounting loop Gigabit PoE 2x Metal rings DIN mount IEC cord
adapter injector
18 19
DynaDish 6 DynaDish 6
It is a simple and completely integrated product with everything you need to quickly install a reliable Wireless Built-in 6 GHz 802.11a/n, dual-chain 24V 0.8A Power
adapter
point to point link. Frequency range 5.9 - 6.4 GHz
Ideal for long distance point-to-point links Antenna beam width Horizontal 7.5°, vertical 7.7° @6.1 GHz
License level 4
Wireless specifications
RATE Tx (dBm) Rx (dBm)
6MBit/s 30 -93
54MBit/s 27 -80
20 21
SXT 6 SXT 6
SXT 6 Specifications
The SXT 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, Product code RBSXTG-6HPnD
but this new device operates in the licensed 6 GHz frequency. This means less interference than the
CPU AR9344
often saturated 5 GHz frequencies for higher speed and more reach. By operating above the most
popular WiFi frequencies you are now able to build your wireless links from busy towers without CPU nominal frequency 600 MHz
suffering problems with noise. CPU core count 1
It is a simple and completely integrated product with everything you need to quickly install a reliable Size of RAM 64 MB
point to point link. Storage 16 MB Flash
Chains Dual-chain
PoE in Yes
License level 4
Wireless specifications
Rate Tx Rx
6MBit/s 30 -93
54MBit/s 27 -80
MCS0 29 -93
MCS7 24 -76
24 V 0.8 A Power Metal ring Gigabit PoE injector Pole mounting bracket
adapter
22 23
hAP mini hAP mini
Wireless specifications
RATE Tx (dBm) Rx (dBm)
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
The powerful 650 MHz CPU gives you
full access to the wide variety of features 54MBit/s 18 -74
provided by the versatile RouterOS MCS0 20 -93
operating system, but if all you want MCS7 16 -71
is a simple access point - it is already
configured out of the box. You simply
need to open it’s web configuration page
and set a password for it.
24 25
mUPS mUPS
mUPS Specifications
The mUPS is a PoE injector with battery backup capability with a 12 V battery connector. It works just 10/100/1000 Ethernet ports 2
like a Gigabit PoE injector, but when power is lost, it switches over to the 12 V battery. Even if your
power source is 28 V, the connected RouterBOARD will not reboot when the power source is lost, Short detection time ~50 us
it will switch over to the 12 V battery transparently. The LEDs Short protection delay ~20 ms
indicate DC line or battery usage, the charging of battery and
After short recovery time ~1 s
low battery level (<50%).
Measurement update time ~45 ms
In RouterOS it is possible to detect when running on battery PoE in 12 - 28 V
power by monitoring the input voltage with scripting, since the
Depends on power source:
voltage will change without a RouterOS reboot.
When input 12 - 24 V = 24 V
PoE out
When input > 24 V = same as input
The mUPS is a simple and compact device to make your When powered by battery = 20 V
network more reliable, or for situations where stable power
DC in 12 - 28 V
input is not available, like solar or automotive installations.
You can use the mUPS with any single 12 V battery (AGM, Gel, Battery connector Female tab terminal 6.3 x 0.8 mm
Lead Acid, regular car batteries, deep cycle marine batteries, Battery charging current 1 A max
etc.).
PoE out max current limit 700 mA
Dimensions 185 x 85 x 30 mm
Included
24 V 1.5 A Screw kit Gigabit PoE Plastic zip tie Battery DC wire Mount bracket
Power adapter injector with T2 Tab
terminal
(also fits T1)
26 27
S+RJ10 PW48V-12V150W
Product description
Product code PW48V-12V150W
• Based on Marvell 88X3310P
• Power consumption 2.4 W max (10GBASE-T, 30 m link)
• Can only be used in SFP+ ports
10GBASE-T Cat6/7 30 m 30 m
Compatible with
28 29
Woobm-USB About
Product code Woobm-USB • Millions of RouterOS powered devices currently routing the world
CPU ESP8266EX • Twenty one years of developing networking software and hardware
Supported protocols 802.11b/g/n • Over 70’000 RouterOS trained and certified network engineers
Antenna gain dBi 1.5 dBi • More than 5000 training classes in the last year
Power input 5V • Offering products that support simple CPEs to complex enterprise networks
30 31
To obtain MikroTik hardware and software, visit our distributors.
For more information and latest news go to
mikrotik.com