Professional Documents
Culture Documents
FH-240
Features
• Meets or exceeds NFPA/ANSI Standards and ADA
Accessibility Guidelines
• UL/ULC listed for wall mounting
• Screw terminal capacity up to 12 AWG
• Universal mounting plate included
• 24VDC with two field selectable settings
• Polarized with wide listed voltage ranges using
filtered DC or unfiltered FWR input voltage
• Horn field selectable tones:
- 3000 Hz interrupted or Electro-mechanical
- Temporal or Non-temporal
- High or Low dBA output
Description • All models mount to 4 inch square, single gang,
double gang or octagonal backbox
Mircom’s FH-240 Select-A-Horn Series is designed • Synchronization requires an SDM-240 Sync Module
to comply with NFPA/ANSI audible emergency
• Available in red or white housing
evacuations signal and UL 464 audible signaling
appliances. The Horn provides two different field
selectable tones, and a High/Low output setting that
can be achieved with the use of mini jumpers located Jumper Settings
on back of the unit.
These appliances are polarized for connecting to
supervised fire alarm circuits. The FH-240 can be
synchronized by using the SDM-240 Sync Module
to comply with NFPA recommendations concerning
photosensitive epilepsy when installing 2 or more visual PC3 PC2 PC1
appliances within the field of view. The strobe signals are
listed for indoor use, wall mount, under UL 1971 standard.
Back of FH-240
5210
CATALOG NUMBER
NOT TO BE USED FOR INSTALLATION PURPOSES.
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Specifications Dimensions inches (mm)
5 (127) 1-17/32(39)
PC3: Pattern Min. Sound
Max. RMS Operating Current
PC2: Tone Output (dBA @
Horn PC1: Volume
(mA)
10ft per UL464)
Current Draw Table
Regulated Regulated Regulated 24V
PC3 PC2 PC1
24V DC 24V FWR DC 5
(127)
Electro HIGH 1 1 1 57 91 83
Non-Temp
Mechanical LOW 1 1 0 42 44 74
HIGH 1 0 1 70 68 84
3000 Hz Front View Side View
LOW 1 0 0 36 38 74
Electro HIGH 0 1 1 57 91 79 3-3/8 (85.7)
Temporal
3-9/32(83.5)
3-3/8(85.7)
3-9/32
Under ULC 525/526 ULC Current @ 24VDC (mA) (83.5)
Low 15
High 42
Back View
Typical Wiring Diagrams
To Next
F.A.C.P. F.A.C.P. SDM-240 SYNC MODULE Device or
Horn Signal Strobe Signal Refer to Fig. 1
Circuit Circuit INPUT OUTPUT End-of-Line
H H Resistor
Control To Next
Panel Device or
End-of-Line
Resistor
Fig. 1
To Next
F.A.C.P. SDM-240 SYNC MODULE IN
Device or OUT
Signal Circuit INPUT Refer to Fig. 1 End-of-Line IN
OUTPUT Resistor OUT
H H
HORN
Mounting Options
Single Gang Box 4” Square Back Box Double Gang Box
4BX-1
4SP-M
Universal Universal Universal
FH-240 Mounting Plate FH-240 Mounting Plate FH-240 Mounting Plate FH-240
Ordering Information
Horn Temperature
Operating Wiring Mounting Sync
Model Number Color Input Voltage Sound Operating
Voltage Range Type Type Module
Output Range
FH-240R Red
Regulated 16 ~ 33VDC Wall or Ceiling 32°F ~ 120°F
Selectable Terminals SDM-240
FH-240W White 24V DC/FWR 16 ~ 33VFWR Mount (0°C ~ 49°C)
Distributed by:
Canada U.S.A.
25 Interchange Way 60 Industrial Parkway
Vaughan, Ontario L4K 5W3 Cheektowaga, New York 14227
Telephone: (905) 660-4655 Toll Free: (888) 660-4655
Fax: (905) 660-4113 Fax Toll Free: (888) 660-4113