Pressure Testing and Calibration Services

1- Calibration Activities
1. (Calibration for All pressure gauges (0 PSI to 30 KPSI)
2. Bourdon tube pressure gauges
3. Electrical pressure gauges
4. Pressure transmitters with electrical output
5. Calibration for silo tanks weight indicator systems.
6. Calibration for pressure recorder (Renting and repair)
7. Calibration for tong torque and tong line pull systems
8. Length measurement tools (vernier calliper- micrometer).
9. Dead weight tester.
2- Pressure Test Activities ( Hydro & Gas test )
1. Hydrostatic pressure test (15 PSI to30 KPSI)
2. Hydrostatic pressure test for choke manifold
3. Hydrostatic pressure test for BOP (manual and Hydraulic) gate valves.
4. Hydrostatic pressure test for stand pipe manifold
5. Hydrostatic pressure test for rubber hose and coflexip hoses
6. Hydrostatic pressure test for treating iron and flow lines (chiksans
,swivels, tee pieces ,pup joints and pipes)
7. Hydrostatic pressure test for air tanks
8. Hydro test pumps(repair and , rent, recertification)
9. Test for all types of safety relief valves (15 PSI to 30 K PSI) (direct
spring and pilot operated safety relive valves ) By using fully
computerized Safety valve test bench.
3- Pressure test area specs
Fully computerized and plc controlled test unit capable Of building
pressure up to 30,000 psi by using two air driven pumps , one
for quick filling and the other to build up pressure to the test value .
 A digital chart paper and report is issued for each test.
 Camera system for monitoring the test and observing any leakage.
 Remote control room to operate the test unit
 Underground 28M long test bay for hoses with hydraulic
clamping doors, Underground 6M long 3M wide 3M deep test area for
high pressure tests with electric driven motors doors

24 East Autostrad Buildings, Sakr Korish, Maadi, Cairo, Egypt

Tel:(+2)(02)27491365 Fax:(+2)(02)27491406 Mobile:01221732510
Website:www.first-env.com E-mail: info@first-env.com Customer Service:01002227145