You are on page 1of 76

IC S

UL
RA
YD

H
U R
YO
ING
ER
POW
UA LI T Y
Q

20
YEARS
G
AUST
UA E E
RANT

Make the Right Choice for YOUR Business ............

Quality Hydraulic Components & Service.


GLOBAL MANUFACTURING PARTNERS

M+S HYDRAULIC is a leading European manufacturer of hydraulic motors, steering


units, brakes and accessories. Founded in 1963, M+S has distrbutors in over 30 coun-
tries worldwide and is one of the largest manufacturers of orbital motors in the world.
Hydraulics International is proud to be M+S Hydraulic’s exclusive Australasian partner.

Caproni is a leading European manufacturer of gear pumps. Originally founded in


1926 as an airplane manufacturer, Caproni later started pump manufacture in 1961.
Caproni now supplies over 31 countries worldwide. Hydraulics International is proud
to be Caproni’s exclusive Australasian partner.

Badestnost is a leading European manufacturer of mobile valves. Founded in 1902 as


a metalworking enterprise, Badestnost later specialised in the manufacture of hydrau-
lic components from 1978. More than 80% of Badestnost products are exported out of
the country and supplied to all continents around the world. Hydraulics International
is proud to be Badestnost's exclusive Australasian partner.

DOFLUID is a premium Taiwanese manufacturer of directional control valves. Dofluid


was founded in 1976 and is the largest manufacturer of directional control valves in
Taiwan. Dofluid manufacturers all of their own parts including coils, and are consid-
ered one of the worlds highest quality valve manufacturers. Hydraulics International is
proud to be Dofluid's exclusive Australian partner.
PICTURE INDEX
MM MLHM MP HP PL MR RW

ORBITAL
MOTORS
GEROTOR GEROTOR GEROTOR GEROTOR GEROTOR ROLL GEROTOR ROLL GEROTOR

PAGE 2 PAGE 3 PAGE 4 PAGE 5 PAGE 6 PAGE 7 PAGE 8

HR RL MH HW MS MLHS MT

ORBITAL
MOTORS
ROLL GEROTOR ROLL GEROTOR ROLL GEROTOR ROLL GEROTOR DISK VALVE DISK VALVE DISK VALVE

PAGE 9 PAGE 10 PAGE 11 PAGE 12 PAGE 13 PAGE 14 PAGE 15

MLHT MTM MV KP LB HKU STEERING & SEALS

ORBITAL
MOTORS
STEERING
DIRECT STATIC STEERING
DISK VALVE DISK VALVE DISK VALVE MOUNTED VALVES
ACCESSORIES &
TORQUE BRAKE ORBITALS MOTOR SEALS
PAGE 16 PAGE 17 PAGE 18 PAGE 19 PAGE 20 PAGE 21 PAGE 22, 23

EUROPEAN EUROPEAN EUROPEAN EUROPEAN AMERICAN AMERICAN GERMAN

GEAR
PUMPS
GROUP 00 GROUP 1 GROUP 2 GROUP 3 GROUP 2 GROUP 3 GROUP 2

PAGE 26 PAGE 27 PAGE 28 PAGE 29 PAGE 30 PAGE 31 PAGE 32

GERMAN SPECIAL PRIORITY MULTIPLE MULTIPLE MULTIPLE MULTIPLE

GEAR
PUMPS
GROUP 3 GROUP 2 GROUP 2 GROUP 2 GROUP 1 GROUP 2 GROUP 3

PAGE 33 PAGE 34 PAGE 35 PAGE 36 PAGE 37 PAGE 38, 39 PAGE 40

GEAR MOTOR GEAR MOTOR GEAR MOTOR HAND PUMP ROTATION

GEAR
MOTORS
HAND PUMPS
GROUP 1 GROUP 2 GROUP 3 WORKSHOP
VANE PUMPS
PAGE 41 PAGE 42 PAGE 43 PAGE 44 PAGE 45

Hydraulics International www.hydraulicsint.com.au


PICTURE INDEX
MONOBLOCK MONOBLOCK MONOBLOCK MONOBLOCK MIXED SELECTOR

MOBILE
VALVES
LOGSPLITTER 6 PORT
35 LT 45 LT 90 LT 150 LT
DIVERTERS 50 & 90 LT
PAGE 48 PAGE 49 PAGE 50 PAGE 51 PAGE 52 PAGE 53

SOLENOID SOLENOID SOLENOID DCV MODULAR MANIFOLDS QUICK HITCHES

CETOP
RANGE
CETOP 3, 5 CETOP 3, 5, 7 CETOP 8 HANDLE, PNEU, ALLOY & STEEL PICTURE
CETOP 3 & 5 PARALLEL & SERIES
DOFLUID INTERNATIONAL INTERNATIONAL HYDRAULIC SAMPLES
PAGE 56 PAGE 57 PAGE 58 PAGE 59 PAGE 60 PAGE 61 PAGE 62

FLOW CONTROL NEEDLE VALVE RELIEF RELIEF P/O CHECK CHECK HOSE BURST

PRESSURE U1 U2

& FLOW T

P
P
P1
P
P2 P2

CONTROL (P)
T

VALVES KNOB KNOB


DIRECT ACTING DIRECT ACTING SINGLE & DUAL 0.5 & 3 BAR FEMALE/FEMALE
REVERSE CHECK CONTROLLED 2WAY
PAGE 64 PAGE 64 PAGE 64 PAGE 64 PAGE 64 PAGE 65 PAGE 65

OVERCENTRE PRESS SWITCH PRIORITY PRIORITY FLOW DIVIDER

PRESSURE V1 V2
C1 C2

& FLOW
R
A

R
C1 C2 V

CONTROL
P

T
T

VALVES SINGLE & DUAL 15 - 360 BAR


HANDLE KNOB
1/2”BSPP
30LT 50 & 90LT
PAGE 65 PAGE 65 PAGE 65 PAGE 65 PAGE 65

BOLT KITS

BOLTS

MIXED

PAGE 66

Hydraulics International www.hydraulicsint.com.au


CONTENTS
ORBITAL MOTORS, VALVES & BRAKES 03
HIGH TORQUE ORBITAL MOTORS..................................................................................................................... 2-18
DIRECT MOUNTED VALVES............................................................................................................................... 19
STATIC TORQUE BRAKES................................................................................................................................... 20
STEERING UNITS AND ACCESSORIES................................................................................................................. 21-22
M+S SEAL KITS.................................................................................................................................................. 23
MOTOR CROSS REFERENCE TABLE.................................................................................................................... 24

GEAR PUMPS & MOTORS 27


SINGLE PUMPS.................................................................................................................................................. 26-35
MULTIPLE PUMPS............................................................................................................................................. 36-40
GEAR MOTORS ................................................................................................................................................. 41-43
VANE PUMPS ................................................................................................................................................... 44
HAND PUMPS .................................................................................................................................................. 44
GEAR PUMP ROTATION..................................................................................................................................... 45

MOBILE VALVES 45
MONOBLOCK VALVES....................................................................................................................................... 48-51
LOG SPLITTER & DIVERTER VALVES................................................................................................................... 52
SELECTOR VALVES............................................................................................................................................. 52

CETOP VALVES 53
SOLENOID OPERATED VALVES........................................................................................................................... 56-58
HANDLE, PNEUMATIC & HYDRAULIC OPERATED VALVES................................................................................. 59
MODULAR VALVES............................................................................................................................................ 60
MANIFOLDS & SUBPLATES................................................................................................................................ 61
QUICK HITCH PICTURES.................................................................................................................................... 62

PRESSURE AND FLOW CONTROL VALVES 61


FLOW CONTROL VALVES................................................................................................................................... 64
RELIEF VALVES................................................................................................................................................... 64
PO CHECK VALVES............................................................................................................................................. 64
CHECK VALVES..................................................................................................................................................... 65
HOSE BURST VALVES......................................................................................................................................... 65
OVERCENTRE VALVES........................................................................................................................................ 65
PRESSURE SWITCHES........................................................................................................................................ 65
PRIORITY VALVES.............................................................................................................................................. 65
FLOW DIVIDER VALVE....................................................................................................................................... 65

BOLT KITS 65
VARIOUS BOLT KITS TO SUIT RANGE ................................................................................................................ 66

Hydraulics International www.hydraulicsint.com.au


ORBITAL MOTOR RANGE

CONTENTS
HIGH TORQUE ORBITAL MOTORS
DIRECT MOUNTED VALVES
STATIC TORQUE BRAKES
STEERING UNITS AND ACCESSORIES
M+S SEAL KITS
MOTOR CROSS REFERENCE TABLE

Hydraulics International 1 www.hydraulicsint.com.au


MM SERIES GEROTOR, EURO DESIGN

Ordering Code System


ADDITIONS MOUNTING PORTS DISPLACEMENT SHAFTS
MM SERIES 1-10
OPTION 1 OPTION 2 OPTION 3 (8cc-50cc) OPTION 4

OPTION 1 – ADDITIONS OPTION 2 – MOUNTING OPTION 3 – PORTS OPTION 4 – SHAFTS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Dual Cross Round (3 Bolt) – 16mm Straight
D $ 52 OMIT - OMIT Rear Ports – 3/8” BSPP - C -
Line Relief 31.5mm Spigot Keyed
SAE AA (2Hole) – 14mm Straight
F $ 26 S Side Ports – 3/8” BSPP $ 10 CK -
63mm Spigot Keyed

SH 16.5mm 9T Splined $ 12

SEAL KIT
Refer to page 23, MM Series

Standard: Shaft 16mm Keyed, Mount 3 Bolt, Rear Ports 3/8" BSPP Case 1/8" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont Weight Kg
Price
L1 - mm RPM LPM Bar Bar Nm
MM 8 C $ 329 8.2 3.5 1950 16 105 140 11 2
MM 12.5 C $ 334 12.9 5.5 1550 20 105 140 16 2.1
MM 20 C $ 340 20 8.5 1000 20 105 140 25 2.2
MM 32 C $ 346 31.8 13.5 630 20 105 140 40 2.3
MM 40 C $ 414 40 17 500 20 82.5 140 41 2.4
MM 50 C $ 464 50 21 400 20 70 140 45 2.6

Standard Mount - MM Series Motor F Mount - MMF Series Motor Standard Mount, M6 3 Bolt
SHShaft C Shaft CKShaft SHShaft C Shaft CKShaft

31,5
45 Dia. Pilot Dia.

F - Mount, SAE AA 2 Hole

L1 L1
80 63
Pilot Dia.

Port A Port B Port A Port B

Standard - Rear Ports S - Side Ports D - Dual Cross Line Relief, Side Ports
Port A
Port A Port B
Port A
30,4

Port B
15,2

Port B max 64

Hydraulics International 2 www.hydraulicsint.com.au


MLHM SERIES GEROTOR, SAE DESIGN

Ordering Code System


ADDITIONS MOUNTING DISPLACEMENT SHAFTS PORTS

MOTORS
MLHM SERIES A-E
OPTION 1 OPTION 2 (8cc-50cc) OPTION 3 OPTION 4

OPTION 1 – ADDITIONS OPTION 2 – MOUNTING OPTION 3 – SHAFTS OPTION 4 – PORTS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Dual Cross Round (3 Bolt) – Rear Ports
D - OMIT - C 5/8” Straight Keyed - 7 -
Line Relief 31.5mm Spigot - 9/16" UNF
SAE AA (2Hole) – Side Ports
F $ 26 G 16.5mm 9T Splined $ 12 4 $ 10
63mm Spigot - 9/16" UNF

SEAL KIT
Refer to page 23, MLHM Series

Standard: Shaft 5/8" Keyed, Mount 3 Bolt, Rear Ports 9/16" UNF, Case 3/8" UNF

Part Number & Pricing Specifications


Speed Flow Pressure Drop Inlet Pressure Torque
List Rotor Width Weight
Part. CC/Rev Max Cont Max Cont Max Cont Max Cont Max Cont
Price L1 - mm Kg
RPM LPM Bar Bar Nm
MLHM 8 C7 $ 339 8.2 3.5 1950 16 105 140 12 2

MLHM 12.5 C7 $ 344 12.9 5.5 1550 20 105 140 17 2.1


MLHM 20 C7 $ 350 20 8.5 1000 20 105 140 26 2.2
MLHM 32 C7 $ 356 31.8 13.5 630 20 105 140 42 2.3
MLHM 40 C7 $ 424 40 17 500 20 82.5 140 42 2.4
MLHM 50 C7 $ 474 50 21 400 20 70 140 45 2.6

Standard Mount - MLHM Series Motor F Mount - MLHMF Series Motor Standard Mount, M6 3 Bolt
G Shaft C Shaft G Shaft C Shaft

31,5
Pilot Dia.
45 Dia.

F - Mount, SAE AA 2 Hole

L1 L1
80 63
Pilot Dia.

Port A Port B Port A Port B

7 - Rear Ports 4 - Side Ports D - Dual Cross Line Relief, Side Ports
Port A
Port A Port B
Port A

Port B
30,4
15,2

Port B max 64

Hydraulics International 3 www.hydraulicsint.com.au


MP SERIES GEROTOR, EURO DESIGN

Ordering Code System

MOUNTING ADDITIONS DISPLACEMENT SHAFTS SHAFT SEALS & OPTIONS


MP SERIES 1-10
OPTION 1 OPTION 2 (25cc-630cc) OPTION 3 OPTION 4

OPTION 1 – MOUNTING OPTION 2 – ADDITIONS OPTION 3 – SHAFTS OPTION 4 – SHAFT SEALS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
SAE A (2Hole) Needle CO 1” Straight Keyed - D # 150 Bar Shaft Seal -
OMIT - N $ 42
82.5mm Spigot Bearings
C 25mm Straight Keyed - U # 200 Bar Shaft Seal $ 24
Square (4Bolt) Rear Ports
Q $ 30 E $ 32 CB 32mm Straight Keyed $ 41 V # 150 Bar Viton Shaft Seal $ 73
44.4mm Spigot - ½" BSPP
Magneto Oval 1" Straight Cross Hole - SPEED SENSOR
* $ 10
F (4Hole) $ 12 10.3mm Hole * Contact Office RS For correct coding, add RS $250
82.5mm Spigot after above seal options
SH 1” 6B Splined $ 10
Wheel Mount SA 24.5mm 14T Splined $ 20 # Refer to specifications for performance
W $ 77
80mm Spigot data. CB HB KB options have lower seal
HB 1.1/4” 14T Splined $ 48 ratings
K 28.56mm 1:10 Tapered $ 22
KB 35mm 1:10 Tapered $ 30 SEAL KIT
Refer to page 23, MP Series
Standard: Shaft 1" Straight Keyed, Mount SAE A 2 Bolt, Ports 1/2" BSPP, Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MP 25 COD $ 416 25 5.2 1600 40 100 175 33 6.1
MP 32 COD $ 416 32 6.3 1560 50 100 175 43 6.1
MP 40 COD $ 416 40 7.4 1500 60 120 175 62 6.2
MP 50 COD $ 416 49.5 6.67 1210 60 140 175 94 6.3
MP 60 COD $ 421 59.5 8.25 1333 60 140 175 110 6.3
MP 80 COD $ 424 79.2 10.67 755 60 140 175 151 6.4
MP 100 COD $ 432 99 13.33 605 60 140 175 193 6.6
MP 125 COD $ 446 123.8 16.67 486 60 140 175 237 6.7
MP 160 COD $ 460 158.4 21.33 378 60 140 175 313 6.9
MP 200 COD $ 478 198 26.67 303 60 140 175 366 7.1
MP 250 COD $ 485 247.5 33.33 242 60 110 175 470 7.3
MP 315 COD $ 510 316.8 42.67 190 60 90 175 480 7.6
MP 400 COD $ 525 396 53.33 150 60 70 175 500 8.2
MP 500 COD $ 642 495 66.63 120 60 60 140 390 9.4
MP 630 COD $ 748 623.6 84 95 60 55 140 440 10.1

Standard Mount - MP Series Motor Q Mount - MPQ Series Motor Standard Mount, SAE A 2 Hole
SA Shaft SH Shaft K Shaft C Shaft CO Shaft SA Shaft SH Shaft K Shaft C Shaft CO Shaft
ø 106,4

ø 82,55

Por
Portt A Por t A

Por t B Por t B
Q - Mount, M10 4 Bolt
ø 82,55
L1
L1

ø 4 4,4

max ø91

max ø91

Hydraulics International 4 www.hydraulicsint.com.au


HP SERIES GEROTOR, SAE DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS PORTS SHAFT SEALS
HP SERIES A-E
OPTION 1 (25cc-400cc) OPTION 2 OPTION 3 OPTION 4

MOTORS
OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – PORTS OPTION 4 – SHAFT SEALS
List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
SAE A (2Hole) Side Ports
OMIT - C 1" Straight Woodruff Keyed - 4 - U # 200 Bar Shaft Seal -
– 82.5mm Spigot - 7/8" UNF
Square (4Bolt) Manifold
Q $ 30 G 1" SAE 6B Splined $ 10 1 $ 16 UE #* 200 Bar Shaft Seal -
– 44.4mm Spigot Ports
25mm Staight Woodruff Keyed # Refer to specifications for full
* -
*Contact Office "C4U-06C" performance data

S 7/8" 13T Splined $ 15 * New body - Design 16mm shorter

1" Straight Cross Hole


H $ 10
(8mm Hole)

TE 1" 1:8 Tapered $ 27 SEAL KIT


Refer to page 23, HP Series

Standard: Shaft 1" Woodruff Keyed, Mount SAE A 2 Hole, Ports 7/8" UNF Case 7/16" UNF

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
HP 25 C4UC $ 416 25 5.2 1200 30 100 140 33 5.5
HP 32 C4UC $ 416 32 6.3 1250 40 125 140 52 5.5
HP 40 C4UC $ 416 40 7.4 1000 40 125 140 65 5.6
HP 50 C4UC $ 416 49.5 6.67 1212 45 125 140 81 5.7
HP 60 C4UC $ 421 59.5 8.25 983 50 125 140 89 5.7
HP 80 C4UC $ 424 79.2 10.67 758 60 125 140 129 5.8
HP 100 C4UC $ 432 99 13.33 606 60 125 140 162 6
HP 125 C4UC $ 446 123.8 16.67 485 60 125 140 202 6.1
HP 160 C4UC $ 460 158.4 21.33 379 60 115 140 238 6.3
HP 200 C4UC $ 478 198 26.67 303 60 105 140 271 6.5
HP 250 C4UC $ 494 247.5 33.33 242 60 100 140 323 6.7
HP 315 C4UC $ 510 316.8 42.67 189 60 90 140 372 7
HP 400 C4UC $ 525 396 53.33 152 60 80 140 414 7.5

Standard Mount - HP Series Motor Q Mount - HPQ Series Motor Standard Mount, SAE A 2 Hole
H Shaft T Shaft G Shaft T Shaft G Shaft
H Shaft
C Shaft S Shaft C Shaft S Shaft

106.4 82,55
Dia. Pilot Dia.

Port A Port A
Port B Port B

Q - Mount, 3/8 UNC 4 Bolt


82,55 Dia.

L1 L1
44,44
Pilot Dia.

90 Dia. 90 Dia.

Hydraulics International 5 www.hydraulicsint.com.au


PL SERIES GEROTOR, HEAVY DUTY BEARING DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL
PL SERIES 1-10
OPTION 1 (40cc-400cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEALS


List List List
Code Description Code Description Code Description
Price Price Price
SAE A (4Hole)
OMIT - CO 1” Straight Keyed - U # 200 Bar Shaft Seal -
– 82.5mm Spigot
Magneto Oval (4Hole)
F $ 32 C 25mm Straight Keyed - OMIT # 100 Bar Shaft Seal -
– 82.5mm Spigot
# Refer to specifications for
CB 32mm Straight Keyed $ 41
full performance data.

HB 1.1/4" 14T Splined $ 45

SEAL KIT
Refer to page 23, PL Series

Standard: Shaft 1" Straight Keyed, Mount SAE A 4 Hole, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
PL 40 COU $ 528 40 7.4 1500 60 120 175 62 7
PL 50 COU $ 528 49.5 6.67 1210 60 140 175 94 7
PL 80 COU $ 534 79.2 10.67 755 60 140 175 151 7.1
PL 100 COU $ 543 99 13.33 605 60 140 175 193 7.2
PL 125 COU $ 562 123.8 16.67 485 60 140 175 237 7.4
PL 160 COU $ 575 158.4 21.33 378 60 140 175 313 7.6
PL 200 COU $ 604 198 26.67 303 60 140 175 366 7.8
PL 250 COU $ 625 247.5 33.33 242 60 110 175 380 8
PL 315 COU $ 646 316.8 42.67 190 60 90 175 380 8.3
PL 400 COU $ 666 396 53.33 150 60 70 175 360 8.6

Standard Mount - PL Series Motor Standard Mount, SAE A 4 Holes


HB Shaft CB Shaft
C Shaft CO Shaft
ø 8 2 , 55

ø 106,4

F - Magneto Mount, Oval 4 Hole

Port B ø 106,4
Port A
ø 8 2 , 55
L1

ø 91

Hydraulics International 6 www.hydraulicsint.com.au


MR SERIES ROLL-GEROTOR, EURO DESIGN

Ordering Code System


MOUNTING ADDITIONS DISPLACEMENT SHAFTS SHAFT SEALS & OPTIONS

MOTORS
MR SERIES 1-10
OPTION 1 OPTION 2 (50cc-400cc) OPTION 3 OPTION 4

OPTION 1 – MOUNTING OPTION 2 – ADDITIONS OPTION 3 – SHAFTS OPTION 4 – SHAFT SEALS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
SAE A (2Hole) Needle CO 1” Straight Keyed - D # 150 Bar Shaft Seal -
OMIT - N $ 42
- 82.5mm Spigot Bearings
C 25mm Straight Keyed - U # 200 Bar Shaft Seal $ 24
Square (4Bolt) Rear Ports
Q $ 30 E $ 32 CB 32mm Straight Keyed $ 41 V # 150 Bar Viton Shaft Seal $ 73
- 44.4mm Spigot - 1/2” BSPP
Magneto (4Hole) 1.1/4" Straight Keyed SPEED SENSOR
F $ 12 * $ 41
- 82.5mm Spigot * Contact Office RS For correct coding, add RS $250
after above seal options
1" Straight Cross Hole
* $ 10
10.3mm Hole * Contact Office TACHO
T For correct coding, add T $180
SH 1” 6B Splined $ 10 after above seal options
SA 24.5mm 14T Splined $ 17 # Refer to specifications for full
HB 1.1/4” 14T Splined $ 48 performance data. CB, HB, KB
options have lower shaft seal ratings
K 28.56mm 1:10 Tapered $ 23
KB 35mm 1:10 Tapered $ 30

SEAL KIT
Refer to page 23, MR Series

Standard: Shaft 1" Straight Keyed, Mount SAE A 2 Hole, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MR 50 COD $ 493 51.5 9 775 40 140 175 100 7.2
MR 80 COD $ 510 80.3 14 750 60 175 175 200 7.4
MR 100 COD $ 521 99.8 17.4 600 60 175 175 240 7.6
MR 125 COD $ 538 125.7 21.8 475 60 175 175 300 7.9
MR 160 COD $ 553 159.6 27.8 375 60 175 175 390 8.3
MR 200 COD $ 576 199.8 34.8 300 60 140 175 385 8.6
MR 250 COD $ 596 250.1 43.5 240 60 110 175 390 9
MR 315 COD $ 614 315.7 54.8 190 60 85 175 360 9.5
MR 400 COD $ 642 397 69.4 150 60 65 175 380 10.3

Standard Mount - MR Series Motor Q Mount - MRQ Series Motor Standard Mount, SAE A 2 Hole
SA Shaft SH Shaft K Shaft C Shaft CO Shaft SA Shaft SH Shaft K Shaft C Shaft CO Shaft
ø 106,4

ø 82,55

Port A Port A

Por t B Por t B Q - Mount, M10 4 Bolt


ø 82,55
L1

L1

ø 44,4

ø 105 ø105

Hydraulics International 7 www.hydraulicsint.com.au


RW SERIES ROLL-GEROTOR, WHEEL MOTOR DESIGN

Ordering Code System


DISPLACEMENT SHAFTS PORTS SHAFT SEALS
RW SERIES 1-10
(50cc-400cc) OPTION 1 OPTION 2 OPTION 3

OPTION 1 – SHAFTS OPTION 2 – PORTS OPTION 3 – SHAFT SEALS


List List List
Code Description Code Description Code Description
Price Price Price

KB 35mm 1:10 Tapered - OMIT Side Ports - 1/2" BSPP - OMIT # 100 Bar Shaft Seal -

Side Ports - 7/8" UNF


OB 1.1/4" 1:8 Tapered - * - U # 200 Bar Shaft Seal -
Contact Office

CB 32mm Straight Keyed - # Refer to Specifications for full performance data

SEAL KIT
Refer to page 23, RW Series

Standard: Shaft 35mm 1:10 Taper, Mount Wheel 4 Bolt, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
RW 50 KB $ 681 51.5 9 775 40 140 175 100 9.6
RW 80 KB $ 698 80.3 14 750 60 175 175 200 9.7
RW 100 KB $ 709 99.8 17.4 600 60 175 175 240 9.8
RW 125 KB $ 726 125.7 21.8 475 60 175 175 300 10
RW 160 KB $ 741 159.6 27.8 375 60 175 175 390 10.3
RW 200 KB $ 764 199.8 34.8 300 60 175 175 450 10.8
RW 250 KB $ 784 250.1 43.5 300 75 175 175 540 11.3
RW 315 KB $ 802 315.7 54.8 240 75 135 175 550 11.8
RW 400 KB $ 830 397 69.4 190 75 110 175 610 12.5

Standard Mount - RW Series Motor


KB Shaft CB Shaft
ø 82,55

Port A Port B ø 147


L1

ø 100

Hydraulics International 8 www.hydraulicsint.com.au


HR SERIES ROLL-GEROTOR, SAE DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS PORTS SHAFT SEALS

MOTORS
HR SERIES A-E
OPTION 1 (50cc-400cc) OPTION 2 OPTION 3 OPTION 4

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – PORTS OPTION 4 – SHAFT SEAL


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
SAE A (2Hole) Side Ports # 200 Bar Shaft
OMIT - C 1" Straight Woodruff Keyed - 4 - U -
– 82.5mm Spigot - 7/8" UNF Seal
Square (4Bolt) Manifold #* 200 Bar Shaft
Q $ 30 G 1" SAE 6B Splined $ 10 1 $ 16 UE -
– 44.4mm Spigot Mount Seal
25mm Staight Woodruff Keyed # Refer to specifications for
* -
*Contact Office "C4U-06C" performance data

S 7/8" 13T Splined $ 15 * New body - design 16mm shorter

1” Straight Cross Hole


H $ 10
(8mm Hole)

TE 1" 1:8 Tapered $ 27


SEAL KIT
Refer to page 23, HR Series

Standard: Shaft 1" Woodruff Keyed, Mount SAE A 2 Hole, Ports 7/8" UNF Case 7/16" UNF

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont Weight Kg
Price
L1 - mm RPM LPM Bar Bar Nm
HR 50 C4UC $ 498 51.5 9 777 40 140 140 98 6.6
HR 80 C4UC $ 515 80.3 14 747 60 140 140 152 6.7
HR 100 C4UC $ 526 99.8 17.4 601 60 140 140 189 7
HR 125 C4UC $ 544 122.5 21.8 490 60 140 140 232 7.1
HR 160 C4UC $ 558 153.6 27.8 391 60 140 140 291 7.3
HR 200 C4UC $ 580 195.8 34.8 306 60 125 140 331 7.8
HR 250 C4UC $ 602 245 43.5 245 60 105 140 348 8.2
HR 315 C4UC $ 620 306 54.8 196 60 100 140 414 8.9
HR 400 C4UC $ 646 386 69.4 155 60 85 140 444 9.6

Standard Mount - HR Series Motor Q Mount - HRQ Series Motor Standard Mount, SAE A 2 Hole
T Shaft H Shaft T Shaft
H Shaft
C Shaft G Shaft S Shaft C Shaft G Shaft S Shaft

106,4 82,55
Dia. Pilot Dia.

Port A Port A
Port B Port B

Q - Mount, 3/8 UNC 4 Bolt

82,55 Dia.

L1 L1 44,44
Pilot Dia.

100 Dia. 100 Dia.

Hydraulics International 9 www.hydraulicsint.com.au


RL SERIES ROLL-GEROTOR, HEAVY DUTY BEARING DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL
RL SERIES 1-10
OPTION 1 (50cc-400cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEAL


List List List
Code Description Code Description Code Description
Price Price Price
SAE A (4Hole)
OMIT - CO 1” Straight Keyed - U # 200 Bar Shaft Seal -
– 82.5mm Spigot
Magneto Oval (4Hole)
F $ 32 C 25mm Straight Keyed - OMIT # 100 Bar Shaft Seal -
– 82.5mmSpigot
# Refer to specifications for full
CB 32mm Straight Keyed $ 40
performance data

HB 1.1/4” 14T Splined $ 45

SEAL KIT
Refer to page 23, RL Series

Standard: Shaft 1" Straight Keyed, Mount SAE A 4 Hole, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
RL 50 COU $ 631 51.5 9 775 40 140 175 100 8.5
RL 80 COU $ 637 80.3 14 750 60 175 175 200 8.6
RL 100 COU $ 649 99.8 17.4 600 60 175 175 240 8.9
RL 125 COU $ 671 125.7 21.8 475 60 175 175 300 9
RL 160 COU $ 692 159.7 27.8 375 60 175 175 390 9.2
RL 200 COU $719 199.8 34.8 300 60 140 175 385 9.6
RL 250 COU $745 250.1 43.5 240 60 110 175 390 10.1
RL 315 COU $ 767 315.7 54.8 190 60 85 175 360 10.8
RL 400 COU $ 781 397 69.4 150 60 65 175 380 11.5

Standard Mount - RL Series Motor Standard Mount, SAE A 4 Hole

CB Shaft HB Shaft C Shaft CO Shaft ø 106,4


ø 8 2 , 55

F - Magneto Mount, Oval 4 Hole


ø 106,4
Port A Port B
ø 8 2 ,5 5
L1

ø 102

Hydraulics International 10 www.hydraulicsint.com.au


MH SERIES ROLL-GEROTOR, HEAVY DUTY DESIGN

Ordering Code System

DISPLACEMENT SHAFTS PORTS SHAFT SEAL

MOTORS
MH SERIES A-E
(200cc-500cc) OPTION 1 OPTION 2 OPTION 3

OPTION 1 – SHAFTS OPTION 2 – PORTS OPTION 3 – SHAFT SEALS


List List List
Code Description Code Description Code Description
Price Price Price

C 32mm Straight Keyed - OMIT Side Ports - 1/2" BSPP - U # 150 Bar Shaft Seal -

Side Ports - 7/8" UNF


* 1.1/4" Straight Keyed *Contact Office - * - # Refer to specifications for performance
Contact Office

CB 35mm Straight Keyed $ 20

SH 1.1/4" 14T Splined $ 18

SEAL KIT
K 35mm 1:10 Tapered $ 23
Refer to page 23, MH Series

Standard: Shaft 32mm Keyed, Mount Magneto Oval 4 Hole, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MH 200 CU $ 760 201.3 27.8 370 75 175 200 510 10.5
MH 250 CU $ 778 252 34.8 295 75 175 200 610 11
MH 315 CU $ 797 314.9 43.5 235 75 175 200 740 11.5
MH 400 CU $ 826 396.80 54.8 185 75 155 200 840 12.3
MH 500 CU $ 916 502.4 69.4 150 75 125 200 820 13

Standard Mount - MH Series Motor


SH Shaft K Shaft CB Shaft C Shaft
ø 82,55

ø 106,4

Port A

Port B
L1

ø 118

Hydraulics International 11 www.hydraulicsint.com.au


HW SERIES ROLL-GEROTOR, WHEEL/MAGNETO DESIGN
Ordering Code System

MOUNTING DISPLACEMENT SHAFTS PORTS SHAFT SEAL


HW SERIES 1-10
OPTION 1 (125cc-550cc) OPTION 2 OPTION 3 OPTION 4

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – PORTS OPTION 4 – SHAFT SEAL


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Special Design similar Side Ports
S - R 1.1/4” 1:8 Tapered - 4 - V # 150 Bar Shaft Seal Viton -
to Dingo/Parker - 7/8” UNF
HW Wheel Mount
OMIT - T 1.1/2” 1:8 Tapered $ 13 # Refer to specifications for performance data
- 82.55mm Spigot
Magneto Oval (6Hole)
F - L 1.1/4" 14T Splined $ 18
- 82.55mm Spigot

K 1.1/4” Straight Keyed -


SEAL KIT
RG 1.3/8” 1:8 Tapered $ 10 Refer to page 23, HW Series

Standard: Shaft 1.1/4" 1:8 Tapered, Mount Wheel 4 Hole, Ports 7/8" UNF Case 7/16" UNF

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
HWS 125 R4V $ 910 126 17.4 357 45 205 210 350 14.5
HWS 160 R4V $ 920 157.8 21.8 380 60 205 210 440 15
HWS 200 R4V $ 927 201.3 27.8 373 75 205 210 550 15.5
HWS 235 R4V $ 942 235.3 32.5 319 75 205 210 645 16
HWS 250 R4V $ 948 252 34.8 298 75 205 210 690 16
HWS 300 R4V $ 975 300 41.4 250 75 205 210 810 16.5
HWS 315 R4V $ 984 314.9 43.5 238 75 205 210 850 16.5
HWS 350 R4V $ 996 347.8 48 216 75 205 210 940 17
HWS 370 R4V $ 1004 369.2 51 203 75 205 210 960 17
HWS 400 R4V $ 1037 396.8 54.8 189 75 185 210 960 17.5
HWS 470 R4V $ 1107 470.6 65 159 75 150 210 920 18.3
HWS 500 R4V $ 1137 502.4 69.4 149 75 140 210 910 18.6
HWS 535 R4V $ 1158 535 74.1 140 75 130 210 900 19
HWS 550 R4V $ 1180 550 76 136 75 125 210 890 19.1

HWS Series Motor HW Series Motor HWF Series Motor HW & HWS Wheel Mount, 4 Holes
ø 147,6
ø 82,55 ø 82,55 ø 82,55
36,8

51,4

F - Magneto Mount, Oval 6 Hole


25,4 25,4 23 23
Port A

Port B

ø 106,4
Port A

Port B

23 23
Port B
Port A
L1

L1

L1

ø 127 ø 127 ø 125

Hydraulics International 12 www.hydraulicsint.com.au


MS SERIES DISK VALVE, EURO DESIGN
Ordering Code System
Y MOUNTING ADDITIONS DISPLACEMENT SHAFTS SHAFT SEAL & OPTIONS SERIES
MS
200-475cc ONLY OPTION1 OPTION 2 (80cc-565cc) OPTION 3 OPTION 4 1-10

MOTORS
OPTION 1 – MOUNTING OPTION 2 – ADDITIONS OPTION 3 – SHAFTS OPTION 4 – SHAFT SEALS
List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Rear Ports 1.1/4” Straight
OMIT SAE A (4Hole) – 82.5mm Spigot - E $ 45 CO - U # 150 Bar Shaft Seal -
- 1/2"BSPP Keyed
32mm Straight
A SAE A (2Hole) – 82.5mm Spigot - C - OMIT # 100 Bar Shaft Seal -
Keyed
Square (4Bolt) – 82.5mm 1.1/4” 14T SPEED SENSOR
Q $ 24 SH $ 18
Spigot Splined RS For correct coding, add RS $250
after above U seal option
Magneto Oval (4Hole) 34.85mm 6T
F $ 45 SL $ 45
– 82.5mm Spigot Splined (PTO) TACHO
T For correct coding, add T $180
35mm 1:10 after above U seal option
W Wheel Mount – 125mm Spigot $ 42 K $ 32
Tapered
# Refer to specifications for
S Short Motor - 100mm Spigot # 160 performance data

# For short motors minus


$160 list off Standard motor price.
SEAL KIT
Refer to page 23, MS Series

Standard: Shaft 1.1/4" Straight Keyed, Mount SAE A 4 Hole, Ports 1/2" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MS 80 COU $ 836 80.5 14 810 65 210 230 240 10.4
MS 100 COU $ 848 100 17.4 750 75 210 230 305 10.6
MS 125 COU $ 870 125.7 21.8 600 75 210 230 375 10.9
MS 160 COU $ 899 159.7 27.8 470 75 210 230 490 11.3
MSY 200 COU $ 912 200 34.8 375 75 210 230 610 11.7
MSY 250 COU $ 935 250 43.5 300 75 200 230 720 12.2
MSY 315 COU $ 994 314.9 54.8 240 75 200 230 825 12.9
MSY 400 COU $ 1055 397 69.4 190 75 160 230 865 13.8
MSY 475 COU $ 1376 474.6 82.6 160 75 130 230 850 14.9
MS 525 COU $ 1406 522.7 74.5 145 75 115 230 850 15.1
MS 565 COU $ 1438 564.9 80.2 130 75 105 230 850 15.5

Standard Mount - MS Series S Short Motor - MSS Series W Wheel Mount - MSW Series Standard Mount, SAE A 4 Hole
SL Shaft
ø125 ø 106,4

K Shaft C Shaft K Shaft C Shaft


SH Shaft SH Shaft
CO Shaft CO Shaft
ø 82,55

W - Wheel Mount, 4 Hole

ø 160
L1

L1
L1

ø 125

Port A Port A
Port A
Port B Port B
Port B

Hydraulics International 13 www.hydraulicsint.com.au


MLHS SERIES DISK VALVE, SAE DESIGN

Ordering Code System


Y MOUNTING DISPLACEMENT SHAFTS PORTS SHAFT SEALS SERIES
MLHS
200-475cc ONLY OPTION1 (80cc-565cc) OPTION 2 OPTION 3 OPTION 4 1-10

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – PORTS OPTION 4 – SHAFT SEALS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Side Ports # 150 Bar
OMIT SAE A (4Hole) - 82.5mm Spigot - C 1.1/4” Straight Keyed - 4 - U -
- 7/8" UNF Shaft Seal
Side Ports # 100 Bar
A SAE A (2Hole) - 82.5mm Spigot - D 1” Straight Keyed - 2 - OMIT -
- 1/2" BSPP Shaft Seal
# Refer to specifications for
F Magneto Oval (6Hole) - 82.5mm Spigot $ 45 SR 7/8” 13T Splined $ 25
performance data

B SAE B (2Hole) - 101.6mm Spigot $ 45 M 32mm Straight Keyed -

E Wheel Mount - 107.95mm Spigot $ 43 S 1" 6B Splined $ 18

SEAL KIT
G 1.1/4" 14T Splined $ 33
Refer to page 23, MLHS Series

T 1.1/4” 1:8 Tapered $ 33

Standard: Shaft 1.1/4" Straight Keyed, Mount SAE A 4 Hole, Ports 7/8" UNF Case 7/16" UNF

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
Weight
Part. List Price CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Kg
L1 - mm RPM LPM Bar Bar Nm
MLHS 80 C4U $ 836 80.5 14 810 65 210 230 240 10.4
MLHS 100 C4U $ 848 100 17.4 750 75 210 230 305 10.6
MLHS 125 C4U $ 870 125.7 21.8 600 75 210 230 375 10.9
MLHS 160 C4U $ 899 159.7 27.8 470 75 210 230 490 11.3
MLHSY 200 C4U $ 912 200 34.8 375 75 210 230 610 11.7
MLHSY 250 C4U $ 935 250 43.5 300 75 200 230 720 12.2
MLHSY 315 C4U $ 994 314.9 54.8 240 75 200 230 825 12.9
MLHSY 400 C4U $ 1055 397 69.4 190 75 160 230 865 13.8
MLHSY 475 C4U $ 1376 474.6 82.6 160 75 130 230 850 14.9
MLHS 525 C4U $ 1406 522.7 74.5 145 75 115 230 850 15.1
MLHS 565 C4U $ 1438 564.9 80.2 130 75 105 230 850 15.5

Standard Mount - MLHS Series Motor E Wheel Mount - MLHSE Series Motor Standard Mount, SAE A 4 Hole
M Shaft M Shaft ø 106,4

C Shaft T Shaft C Shaft


G Shaft SWShaft T Shaft
G Shaft
S Shaft D Shaft
S Shaft
ø 8 2,55

E - Wheel Mount, 4 Hole


ø 147,8

L1 L1

107,95 / 107,82
Port A Port A Pilot Dia.

Port B Port B

Hydraulics International 14 www.hydraulicsint.com.au


MT SERIES DISK VALVE, EURO DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL

MOTORS
MT SERIES 1-10
OPTION 1 (160cc-725cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEAL


List List List
Code Description Code Description Code Description
Price Price Price

OMIT Square (4Hole) - 125mm Spigot - C 40mm Straight Keyed - U # 100 Bar Shaft Seal -

W Wheel Mount - 160mm Spigot $ 130 CO 1.1/2" Straight Keyed - OMIT # 75 Bar Shaft Seal

# Refer to specifications for


S Short Motor - 125mm Spigot # 240 SH 1.1/2" 17T Splined $ 35
performance data
# For short motors minus
SH-06 1.1/4" 14T Splined $ 35
$240 list off Standard motor price.

SL 34.85mm 6T Splined (P.T.O) $ 95

SEAL KIT
K 45mm 1:10 Tapered $ 40 Refer to page 23, MT Series

Standard: Shaft 40mm Straight Keyed, Mount 4 Hole, Ports 3/4" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MT 160 CU $ 1582 161.1 16.5 622 100 200 210 470 21
MT 200 CU $ 1620 201.4 21.5 620 125 200 210 590 21.5
MT 250 CU $ 1663 251.8 27.8 496 125 200 210 730 22
MT 315 CU $ 1728 326.3 37 382 125 200 210 950 23
MT 400 CU $ 1783 410.9 47.5 304 125 180 210 1080 24
MT 500 CU $ 1880 523.6 61.5 238 125 160 210 1220 25
MT 630 CU $ 2184 631.2 57.5 197 125 140 210 1300 25.5
MT 725 CU $ 2294 724.3 66.5 172 125 120 210 1270 26

Standard Mount - MT Series Short Motor- MTS Series W Wheel Mount - MTW Series Standard Mount, 4 Holes
SL Shaft ø160 C, CO Shaft
K Shaft C, CO Shaft K Shaft ø 160
SH Shaft SH Shaft
ø 125

114
max

W - Wheel Mount, 4 Hole

ø200
L1

L1

L1

ø 160

Port A
Port A Port A
Port B Port B
Port B

Hydraulics International 15 www.hydraulicsint.com.au


MLHT SERIES DISK VALVE, SAE DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL
MLHT SERIES 1-10
OPTION 1 (160cc-725cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEAL


List List List
Code Description Code Description Code Description
Price Price Price
SAE C (4Hole)
OMIT - C 1.1/2" Straight Keyed - U # 100 Bar Shaft Seal -
- 127 mm Spigot
Wheel Mount # Refer to specifications for
W $ 130 M 40mm Straight Keyed -
- 160mm Spigot performance data

G 1.1/2" 17T Splined $ 35

T 45mm 1:8 Tapered $ 40


SEAL KIT
Refer to page 23, MLHT Series

Standard: Shaft 1.1/2" Straight Keyed, Mount SAE C 4 Hole, Ports 1.1/16" UNF Case 9/16" UNF

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MLHT 160 C4U $ 1582 161.1 16.5 622 100 200 210 470 21
MLHT 200 C4U $ 1620 201.4 21.5 620 125 200 210 590 21.5
MLHT 250 C4U $ 1663 251.8 27.8 496 125 200 210 730 22
MLHT 315 C4U $ 1728 326.3 37 382 125 200 210 950 23
MLHT 400 C4U $ 1783 410.9 47.5 304 125 180 210 1080 24
MLHT 1500 C4U $ 1880 523.6 61.5 238 125 160 210 1220 25
MLHT 630 C4U $ 2184 631.2 57.5 197 125 140 210 1300 25.5
MLHT 725 C4U $ 2294 724.3 66.5 172 125 120 210 1270 26

Standard Mount - MLHT Series Motor W Wheel Mount - MLHTW Series Motor Standard Mount, SAE C 4 Holes

C, M Shaft T Shaft C, M Shaft 162,3/161,5 Dia.


T Shaft
G Shaft G Shaft

127
Pilot Dia.

114
max

W - Wheel Mount, 4 Hole

200,4 / 199,6 Dia.

L1 L1

Port A Port A
160
Pilot Dia.
Port B Port B

Hydraulics International 16 www.hydraulicsint.com.au


MTM SERIES DISK VALVE, HEAVY DUTY

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL

MOTORS
MTM SERIES 1-10
OPTION 1 (200cc-725cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEAL


List List List
Code Description Code Description Code Description
Price Price Price
OMIT Square (4Hole) – 160mm Spigot - C 40mm Straight Keyed - OMIT # 75 Bar Shaft Seal -
C Square (4Hole) – 125mm Spigot $ 30 SH 1.1/2” 17T Splined $ 35 # Refer to specifications for performance data
W Wheel Mount – 160mm Spigot $ 132 K 50mm 1:10 Tapered $ 41
V Very Short Motor – 9 Mounting Bolts # 240
# For short motors minus $240 list off Standard motor price SEAL KIT
Refer to page 23, MTM Series

Standard: Shaft 40mm Straight Keyed, Mount Standard 4 Hole, Ports 3/4" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MTM 200 C $ 1978 201.4 25 625 125 250 270 720 27.9
MTM 250 C $ 2032 251.8 31.3 500 125 250 270 900 28.3
MTM 315 C $ 2110 326.3 40.5 380 125 250 270 1160 29.1
MTM 400 C $ 2180 410.9 51 305 125 250 270 1470 30
MTM 470 C $ 2250 475 59 260 125 250 270 1710 30.7
MTM 500 C $ 2298 523.6 65 240 125 230 270 1720 31.2
MTM 630 C $ 2670 631.2 61 190 125 200 270 1830 30.7
MTM 725 C $ 2806 724.3 70 170 125 160 270 1600 32

Standard Mount - MTM Series Motor C Mount - MTMC Series Motor W Wheel Mount - MTMW Series Motor
K Shaft C,CO Shaft SH Shaft K Shaft C,CO Shaft SH Shaft K Shaft C, CO Shaft SH Shaft
L1
L1

L1

Port A Port A

Port B Port B
Port A

Port B

Standard Mount, 4 Holes C - Mount, 4 Holes W - Wheel Mount, 4 Holes


ø 160 ø 200
ø 200
ø 125

ø 160
ø 160

Hydraulics International 17 www.hydraulicsint.com.au


MV SERIES DISK VALVE, EURO DESIGN

Ordering Code System


MOUNTING DISPLACEMENT SHAFTS SHAFT SEAL
MV SERIES 1-10
OPTION 1 (315cc-800cc) OPTION 2 OPTION 3

OPTION 1 – MOUNTING OPTION 2 – SHAFTS OPTION 3 – SHAFT SEAL


List List List
Code Description Code Description Code Description
Price Price Price
OMIT Square (4Hole) – 160mm Spigot - C 50mm Straight Keyed - OMIT # 60 Bar Shaft Seal -
C SAE C (4Hole) – 127mm Spigot - CO 2.1/4” Straight Keyed - HD Reinforced Shaft Seal $ 68
W Wheel Mount – 180mm Spigot $ 300 SH 2.1/8” 16T Splined $ 72 # Refer to specifications for performance data
S Short Motor – 140mm Spigot # 290 K 60mm 1:10 Tapered $ 90
# For short motor minus $290 list off Standard
motor price
SEAL KIT
Refer to page 23, MV Series

Standard: Shaft 50mm Straight Keyed, Mount 4 Hole, Ports 1" BSPP Case 1/4" BSPP

Part Number & Pricing Specifications


Rotor Speed Flow Pressure Drop Inlet Pressure Torque
List Weight
Part. CC/Rev Width Max Cont Max Cont Max Cont Max Cont Max Cont
Price Kg
L1 - mm RPM LPM Bar Bar Nm
MV 315 C $ 2250 314.5 21.5 510 160 200 210 920 32.8
MV 400 C $ 2335 400.9 28.5 500 200 200 210 1180 33.6
MV 500 C $ 2490 499.6 36.5 400 200 200 210 1460 34.5
MV 630 C $ 2900 629.1 47 320 200 180 210 1660 35.9
MV 800 C $ 3056 801.8 61 250 200 160 210 1880 37.5

Standard Mount - MV Series Motor C Mount - MVC Series Motor W Wheel Mount - MVW Series Motor
K Shaft K Shaft K Shaft
SH Shaft SH Shaft SH Shaft
C Shaft CO Shaft C Shaft CO Shaft C Shaft CO Shaft
L1
L1

L1

Port A Port A
Port A
Port B Port B
Port B

W - Wheel Mount, 4 Holes


Standard Mount, 4 Holes C - Mount, 4 Holes
ø 224
ø 127
ø 160

ø 180

ø 162
ø 200

Hydraulics International 18 www.hydraulicsint.com.au


KP SERIES DIRECT MOUNTED MOTOR VALVES

MOTOR VALVES
Overcentre Valves with Break Release Port
Part Number & Pricing Specifications
A1 B1
Ports Flow Pressure
List BSPP Pilot Ratio Weight
Motor Type Cartridge Max Cont Range
Price Kg
A C B A B C LPM Bar
KPBR 250/1/E $ 317 MP MR MH Single 1/2" 1/4" 60 60-280 4.25:1 3.1
KPBR 250/1/D $ 398 MP MR MH Dual 1/2" 1/4" 60 60-280 4.25:1 3.1
KPBW 250/1/D $ 688 RW HW Dual 1/2" 1/4" 60 60-280 4.25:1 3.3
KPBS 250/1/E $ 317 MS Single 1/2" 1/4" 60 60-280 4.25:1 2.9
KPBS 250/1/D $ 398 MS Dual 1/2" 1/4" 60 60-280 4.25:1 3
KPBS 250/2/D $ 408 MS Dual 1/2" 1/4" 60 60-280 8:1 3
KPBT 250/1/E $ 352 MT Single 3/4" 1/4" 100 70-250 4.25:1 5.4
KPBT 250/1/D $ 435 MT Dual 3/4" 1/4" 100 70-250 4.25:1 5.8
KPBV 250/1/D $ 903 MV Dual 1" 1/4" 200 70-250 4.25:1 9.8

Cross Line Relief Valves


Part Number & Pricing Specifications
A1 B1
Ports Flow Pressure
List BSPP Weight
Motor Type Cartridge Max Cont Range
Price Kg
A B A B LPM Bar
KPER 210 $ 164 MP MR MH Single 1/2" 60 50-210 1.6
KPDR 210 $ 213 MP MR MH Dual 1/2" 60 50-210 1.6
KPDW 250 $ 495 RW HW Dual 1/2" 60 80-250 2.9
KPES 210 $ 164 MS Single 1/2" 60 50-210 1.5
KPDS 210 $ 213 MS Dual 1/2" 60 50-210 1.5
KPET 210 $ 304 MT Single 3/4" 120 80-210 5.1
KPDT 210 $ 400 MT Dual 3/4" 120 80-210 5.6
KPDV 250 $ 946 MV Dual 1" 200 20-250 8

Overcentre and Crossline Relief Valves Combined


Part Number & Pricing Specifications
B1 A1
Ports Flow Pressure
List BSPP Weight
Motor Type Cartridge Max Cont Range Pilot Ratio
Price Kg
B A A B LPM Bar
BVR 1209/25A $ 520 MP MR MH Dual 1/2" 50 30-250 4.25:1 1.6

Shuttle Valves
Part Number & Pricing Specifications
A1 B1
Ports Flow Pressure
List BSPP Weight
Motor Type Max Cont Max Cont
Price Kg
A C B A B C LPM Bar
KPWR $ 130 MP MR MH 1/2" 1/4" 60 250 0.9
KPWS $ 130 MS 1/2" 1/4" 60 250 0.7
KPWT $ 270 MT 3/4" 1/4" 100 250 1.8
KPWV $ 440 MV 1" 1/4" 200 250 3.2

Handle Operated Direction Control Valve


Part Number & Pricing Specifications
A B
Ports Flow Pressure Drop
List BSPP Weight
Motor Type Max Cont Max Cont
Price Kg
A B LPM Bar
P T

BDR 1205/25A $ 295 MP MR MH 1/2" 50 30-250 1.1

BDS 1205/25A $ 295 MS 1/2" 50 30-250 1.1

Hydraulics International 19 www.hydraulicsint.com.au


LB SERIES STATIC TORQUE DISK BRAKES
Brakes to Suit Motors MP, MR, MH and MS
Part Number & Pricing Specifications
Brake Input Brake Output Static Opening Pressure Min Oil Pressure
List Weight
Part. Motor Series Shaft Shaft Torque Min / Max Release Drain
Price Kg
Page Ref Mount Mount Nm Bar cm3 Bar
MP, MR 1" Keyed 1" Keyed
LB/288CO-CO $ 752 610 - 640 23 / 300 7-8 0.5 10
Pages 4, 7 SAE A 2 Bolt SAE A 2/4 Bolt
MP, MR 1" 6B Splined 1" Keyed
LB/288SH-CO $ 752 610 - 640 23 / 300 7-8 0.5 10
Pages 4, 7 SAE A 2 Bolt SAE A 2/4 Bolt
MP, MR, MH, MS 32mm Straight 32mm Straight
LB/288CB-CB $ 796 610 - 640 23 / 300 7-8 0.5 10
Pages 4, 7, 11, 13 SAE A 2/4 Bolt SAE A 2/4 Bolt

LB 288 Series - Input, Side & Output Views Example - MR Motor + LB/288 Brake
C D C : Brake Release Port
ø106
D : Drainage Tap

82.55
Pilot Dia

106.4 Dia

82.55 Pilot Dia

Brakes to Suit Motors MSS, MTS and MVS


Part Number & Pricing Specifications

Brake Input Brake Output Static Opening Pressure MIn Oil Pressure
List Weight
Part. Motor Series Shaft Torque Min - Max Release Drain
Price Kg
Page Ref Mount Nm Bar Cm3 Bar
MSS Short Motor 32mm Straight
LBS/289-CB $ 1132 610 - 640 23 - 300 7-8 5 9
Page 13 SAE A 2/4 Bolt
MSS Short Motor 35mm 1:10 Tapered
LBS/290-KB $ 1228 610 - 640 23 - 300 7-8 5 9
Page 13 Wheel
MTS Short Motor 40mm Straight Keyed
LBS/314-C $ 1628 1260 - 1360 29 - 300 8- 9 5 24
Page 15 4 Bolt Mount
MTS Short Motor 45mm 1:10 Tapered
LBS/315-K $ 1658 1260 - 1360 29 - 300 8-9 5 25
Page 15 Wheel
MVS Short Motor 50mm Straight Keyed
LBS/316-C $ 2150 1270 - 1370 29 - 300 8-9 5 25
Page 18 4 Bolt
MVS Short Motor 60mm 1:10 Tapered
LBS/316-K $ 2150 1270 - 1370 29 - 300 8-9 5 25
Page 18 Wheel

LBS 289 C - Side & Output View LBS 290 KB - Side & Output View
D C C : Brake release Port C C : Brake Release Port
ø106 D
D : Drainage tap D : Drainage Tap

60
ø1
ø 82,55

ø 125

LBS 314 C - Side & Output View LBS 315 K - Side & Output View
C C : Brake Release Port C C : Brake Release Port
D
D D : Drainage Tap D : Drainage Tap

60
ø1
ø 125

160
ø

ø2
00

LB 316 K - Side & Output Views Example - MSS Motor + LBS 289 Brake
C C : Brake Release Port
D
D : Drainage Tap

ø224
180
ø

Hydraulics International 20 www.hydraulicsint.com.au


HKU SERIES STEERING ORBITALS

BRAKES & STEERING


Ordering Code System
RELIEF (PART A) DISPLACEMENT CONFIGURATION RELIEF (PART B) ADDITIONS
HKU SERIES 1-10
OPTION 1 (40cc-1000cc) OPTION 2 OPTION 3 OPTION 4

OPTION 1 – RELIEF OPTION 2 – CONFIGURATION OPTION 3 – RELIEF OPTION 4 – ADDITIONS


List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
# Built in Relief and Open Centre 150 Bar Relief, 200
S $ 110 4 - 150 - A 3/4” UNF Ports $ 20
Shock Valves Non Load Reaction Bar Shock Valves
# To complete "S" option you must Open Centre 175 Bar Relief, 240
3 $ 22 175 - PB # Power Beyond $ 73
select "150" or "175" in OPTION 3. Load Reaction Bar Shock Valves

7 Closed Centre $ 22 # Available for Displacements


40 - 125cc Only
Load Sense Static use
5 $ 140
with PRD/80 valve

5T Load Sense – Static $ 140


SEAL KIT
5DT Load Sense – Dynamic $ 150 Refer to page 23, HKU Series

Standard: Configuration Open Centre, Non Load Reaction Ports 1/2" BSPP

Part Number & Pricing Specifications


Flow Pressure Pressure
List Rotor Width Weight
Part. CC/Rev Max Cont Max Cont Tank
Price L1 - mm Kg
LPM Bar Bar
HKU 40/4 $ 626 39.6 6.5 4 140 25 5.3
HKU 50/4 $ 632 49.5 6.5 5 140 25 5.4
HKU 63/4 $ 634 65.6 8.2 6 170 25 5.5
HKU 80/4 $ 643 79.2 10.6 8 170 25 5.6
HKU 100/4 $ 653 99 13.2 10 170 25 5.7
HKU 125/4 $ 665 123.8 16.6 13 170 25 5.8
HKU 160/4 $ 688 158.4 20.8 16 170 25 6
HKU 200/4 $ 710 198 26.6 20 170 25 6.3
HKU 250/4 $ 755 247.5 32.9 25 170 25 6.5
HKU 320/4 $ 808 316.8 42.7 32 170 25 7
HKU 400/4 $ 844 396 52.9 40 170 25 7.4
HKU 500/4 $ 1252 495 61.2 50 170 25 8
HKU 630/4 $ 1312 623.6 83.6 63 140 25 8.7
HKU 800/4 $ 1381 793 110.7 70 140 25 9.6
HKU 1000/4 $ 1985 990 133.2 70 100 25 10.6

Standard HKU.../3../4../7 - Side View Top View Open Centre Open Centre Open Centre Closed Centre
Load Reaction Non Load Reaction Non Load Reaction Non Load Reaction
44
L1 Power Beyond
L R L R L R

L R
60

44

T P

P T P T P T

HKU.../3 HKU.../4 HKU.../4PB HKU.../7


ø 82

Open Centre Open Centre Closed Centre Closed Centre


Load Sense HKUS.../5T... - Side View Top View Load Reaction Non Load Reaction Load Sense Load Sense using
44 Relief/Shock Valves Relief/Shock Valves Relief/Shock Valves PRD/80 Valve
L1 L R L R L R
LS
LS

L R
60

44

T P

LS
P T P T
L P T LS R
P T
ø 82 HKUS.../3 HKUS.../4 HKUS.../5T HKUS.../5

Hydraulics International 21 www.hydraulicsint.com.au


HKU SERIES ACCESSORIES TO SUIT STEERING ORBITALS
Steering Columns and Shaft Journals
Standard KK Series Column fitted to HKU Steering Orbital
Part Number & Pricing Specifications

List Length (L) Weight


Part.
Price mm Kg

KK75-I $ 122 78 0.75


KK150-I $ 144 168.2 1.1
KK275-I $ 166 278 1.5
KK390-I $ 176 393 1.9
KK465-I $ 232 465 2.5
KK750-I $ 254 777.8 3.3
SJ-HKU $ 40 Shaft Journal - to suit HKU Series Orbital

Standard KK Series Column - 1:20 Taper Shaft


Code List
Steering Column Options
Option Price ø 82

ø 23,2
A
Woodruff key 5
5 x 6,5
E $ 46 Electric Signal Connection DIN 6888

14 - 02
ø 44,5
F $ 16 Mounting Flange with Tabs

M18 x 1,5
A
Taper 1:20
32
48
L
Steering Wheels
360 Steering Wheel (400 Dia Available)
Part Number & Pricing Specifications

List Wheel Dia. Column Shaft


Part.
Price mm Input

360 Wheel $ 130 362 1:20 Tapered

400 Wheel $ 150 400 1:20 Tapered

400S Wheel $ 150 400 36T Splined

360-S.KNOB $ 25 Wheel Spinner, for "360 Wheel" only

Relief Valves - BKH Series


Part Number & Pricing Specifications
Flow Pressure Relief Shock Valves
List Valve Weight
Part. Max Cont Max Cont Setting Setting
Price Description Kg
LPM Bar Bar Bar
BKH1-125 $ 172 Direct Mount 80 160 125 180 1.9
BKH1-150 $ 172 Direct Mount 80 160 150 200 1.9
BKHR-125 $ 185 Inline 80 160 125 180 2.4

Priority Valves with Load Sense - PR Series


Part Number & Pricing Specifications
Flow Pressure Pressure Pressure Pressure
List Valve Weight
Part. Max Cont P, EF CF, LS , # R, L Tank
Price Description Kg
LPM Bar Bar Bar Bar
Direct Mount -
PRD 80/7 $ 275 80 250 210 280 20 2.3
HKUS../5 only
PRTA 80/7 $ 304 Inline 80 250 210 - - 1.4
PRT 160/10 $ 548 Inline 160 350 # PP & CF - 210 - 15 4.5

Torque Amplifiers - UVM Series


Part Number & Pricing Specifications
Flow Pressure Pressure
List Displacement Weight
Part. Max Cont Max Cont Tank
Price CC/Rev Kg
LPM Bar Bar
UVM 100 $ 684 100 10 70 20 6
UVM 160 $ 706 160 16 70 20 6.4

Hydraulics International 22 www.hydraulicsint.com.au


MOTOR, STEERING AND BRAKE SEAL KITS

MOTOR SEALS
SEAL KIT SHAFT SEALS DUST SEALS
Pressure
List Page List Dimensions List Dimensions
Part. Part. Rating Without Part.
Price No. Price mm Price mm
Drain Line
MM-SK $ 78 2 MM-SS $ 40 17x28x5.5 140 Bar ≤100rpm MM-DS $ 11 23.5x17x3.4
MM-SKV $ 116 2 MM-SSV $ 78 17x28x5.5 140 Bar ≤100rpm MM-DS $ 11 23.5x17x3.4
MLHM-SK $ 78 3 MLHM-SS $ 40 17x28x5.5 140 Bar ≤100rpm MLHM-DS $ 11 23.5x17x3.4
MP-SKD $ 74 4 MP-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MP-DS $ 11 28.5x35x2
MPQ-SKD $ 76 4 MPQ-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MPQ-DS $ 11 28.5x35x2
MP-SKU $ 94 4 MP-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MP-DS $ 11 28.5x35x2
MP-SKV $ 114 4 MP-SSV $ 73 28.56x42x5.5 150 Bar ≤100rpm MP-DS $ 11 28.5x35x2
MPQ-SKU $ 96 4 MPQ-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MPQ-DS $ 11 28.5x35x2
MP-SKB $ 86 4 MP-SSB $ 40 35x48x5.5 100 Bar ≤100rpm MP-DSB $ 15 35x42x2
MLHP-SKD $ 74 TBA MLHP-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MLHP-DS $ 11 28.5x35x2
MLHP-SKU $ 94 TBA MLHP-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MLHP-DS $ 11 28.5x35x2
HP-SKU $ 94 5 HP-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm HP-DS $ 11 35x28.5x2
HP-SKUE $ 94 5 HP-SSUE $ 52 28.56x38x4.8 200 Bar ≤200rpm HP-DS $ 11 35x28.5x2
PL-SK $ 86 6 PL-SS $ 42 35x48x5.5 100 Bar ≤100rpm PL-DS $ 15 35x42x2
MR-SKD $ 74 7 MR-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MR-DS $ 11 28.5x35x2
MRQ-SKD $ 76 7 MRQ-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MRQ-DS $ 11 28.5x35x2
MR-SKU $ 94 7 MR-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MR-DS $ 11 28.5x35x2
MR-SKV $ 114 7 MR-SSV $ 73 28.56x42x5.5 150 Bar ≤100rpm MR-DS $ 11 25.5x35x2
MRQ-SKU $ 96 7 MRQ-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MRQ-DS $ 11 28.5x35x2
MR-SKB $ 94 7 MR-SSB $ 40 35x48x5.5 100 Bar ≤100rpm MR-DSB $ 15 35x42x2
RW-SKU $ 94 8 RW-SSU $ 40 35x48x5.5 200 Bar ≤150rpm RW-DS $ 15 35x42x2
MLHR-SKD $ 74 TBA MLHR-SS $ 33 28.56x42x5.5 150 Bar ≤100rpm MLHR-DS $ 11 28.5x35x2
MLHR-SKU $ 94 TBA MLHR-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm MLHR-DS $ 11 28.5x35x2
MLHRW-SKB $ 94 TBA MLHRW-SSB $ 40 35x48x5.5 100 Bar ≤100rpm MLHRW-DS $ 15 35x42x2
HR-SKU $ 94 9 HR-SSU $ 52 28.56x42x5.5 200 Bar ≤200rpm HR-DS $ 11 35x28.5x2
HR-SKUE $ 94 9 HR-SSUE $ 52 28.56x38x4.8 200 Bar ≤200rpm HR-DS $ 11 35x28.5x2
RL-SK $ 97 10 RL-SS $ 40 35x48x5.5 100 Bar ≤100rpm RL-DS $ 15 35x42x2
MH-SKU $ 120 11 MH-SSU $ 68 35x48x5.5 150 Bar ≤200rpm MH-DS $ 15 35x42x2
HW-SKU $ 140 12 HW-SSU $ 88 38.1x50x5.5 150 Bar ≤70rpm HW-DS $ 15 38.1x48x2
MS-SK $ 94 13 MS-SS $ 42 35x48x5.5 100 Bar ≤100rpm MS-DS $ 15 35x42x2
MS-SKU $ 120 13 MS-SSU $ 68 35x48x5.5 150 Bar ≤200rpm MS-DS $ 15 35x42x2
MSS-SK $ 42 13 - - - - - - -
MLHS-SKU $ 120 14 MLHS-SSU $ 88 35x48x5.5 150 bar ≤200rpm MLHS-DS $ 15 35x42x2
MT-SK $ 112 15 MT-SS $ 55 45x65x7 75 Bar ≤150rpm MT-DS $ 17 45x52x4
MT-SKU $ 218 15 MT-SSU $ 160 45x65x4.8 100 Bar ≤300rpm MT-DS $ 17 45x52x3
MTS-SK $ 60 15 - - - - - - -
MLHT-SKU $ 218 16 MLHT-SSU $ 160 45x65x5.5 100 Bar ≤300rpm MLHT-DS $ 17 45x52x3
MTM-SK $ 162 17 MTM-SS $ 110 50x70x7 75 Bar ≤100rpm MTM-DS $ 17 50x58x4
MTMV-SK $ 112 17 MTMV-SS $ 110 50x70x7 75 Bar ≤100rpm MTM-DS $ 17 50x58x4
MV-SK $ 220 18 MV-SS $ 132 60X80X7/6 60 Bar ≤100rpm MV-DS $ 22 60x72x3
MVS-SK $ 110 18 - - - - - - -
HKU-SK $ 59 21 - - - - - - -
LB 288-SK $ 101 20 - - - - - - -
LBS 289/290-SK $ 117 20 - - - - - - -
LBS 314/315-SK $ 139 20 - - - - - - -
LBS 316-SK $ 170 20 - - - - - - -

Hydraulics International 23 www.hydraulicsint.com.au


MOTOR CROSS REFERENCE TABLE
ORBITAL MOTORS

M+S EATON
CHAR LYNN
DANFOSS
ROSS
TRW
WHITE
CROSS
PARKER
SAM
BREVINI
BOSCH
REXROTH
CHINESE

MM OMM MGX BMM

MLHM J SERIES - - - BGM

MP OMP MF WP TC BG MGP, GMP BMP, MAP

TE

HP H SERIES DH MG RS TB SMPS

MR OMR MB WR BR MGR, GMR BMR, MAR

HR S, T SERIES DS RE TF

MLHRW, RW W SERIES OMEW SMRS

MH OMH BMH, SMH

MLHH ME

HW, HWF RE TG

MS, MSY OMS TG MGS, GMS BMS, MAS

HPR

MLHS 2000 SERIES ME RE TG

MT OMT MGT, GMT BMT

MLHT 6000 SERIES MJ HT

MTM TMT

MV OMV MGV, GMV BMV

MLHV 10000 SERIES

HKU 3, 6, 12 SERIES OSPB LAGC

HKUS 3, 6, 12 SERIES OSPC -

(Steering)

Information in this table is a guide only. Technical


specifications could vary between brands. Please call our
office for technical support.

Hydraulics International 24 www.hydraulicsint.com.au


HYDRAULIC GEAR PUMPS &
MOTORS

CONTENTS
SINGLE GEAR PUMPS
MULTIPLE GEAR PUMPS
GEAR MOTORS
VANE PUMPS
HAND PUMPS
GEAR PUMP ROTATION

Hydraulics International 25 www.hydraulicsint.com.au


EUROPEAN STANDARD GROUP 00
Standard: Shaft M6 Keyed with Lock Nut, Mount 2 Bolt 22mm Spigot, R/H Rotation, Ports BSPP Threaded

Part Number & Pricing Specifications

Ports Speed Pressure


List Weight
Part. CC/Rev Max Cont Max Cont
Price Suction Pressure Kg
RPM Bar
00C0.25X032G $ 218 0.25 1/4" 1/4" 3500 200 0.4
00C0.3X032G $ 218 0.3 1/4" 1/4" 3500 200 0.4
00C0.5X032G $ 218 0.5 1/4" 1/4" 3500 200 0.4
00C0.75X032G $ 218 0.75 1/4" 1/4" 3500 200 0.4
00C1X032G $ 223 1 1/4" 1/4" 3500 200 0.4
00C1.25X032G $ 223 1.25 1/4" 1/4" 3000 200 0.4
00C1.5X032G $ 227 1.5 1/4" 1/4" 2500 175 0.4
00C1.75X032G $ 227 1.75 1/4" 1/4" 2500 160 0.4
00C2X032G $ 227 2 1/4" 1/4" 2000 160 0.4

Seal Kits and Options

Part. List Price Description

GR00-SK $ 30 Seal Kit - Includes all seals for group 00 pumps


GR00-SS $7 Shaft Seal - Shaft seal only, suitable for group 00 pumps
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - 2 Bolt, M6 Keyed Side View - 2 Bolt, M6 Keyed, BSPP


032G Series 032G Series

5 8 8
22
M6
66

50

Hydraulics International 26 www.hydraulicsint.com.au


EUROPEAN STANDARD GROUP 1

Standard: Shaft 1:8 Tapered, Mount 4 Bolt 25.4mm Spigot, R/H Rotation, Ports BSPP Threaded/Flanged

BSPP Threaded Ports Flanged Ports Specifications

Ports Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
10C1X053G $ 218 10C1X026 $ 218 1 3/8" 3/8" 3500 250 1

PUMPS
10C1.25X053G $ 218 10C1.25X026 $ 218 1.25 3/8" 3/8" 3500 250 1
10C1.6X053G $ 218 10C1.6X026 $ 218 1.6 3/8" 3/8" 3500 250 1
10C2X053G $ 218 10C2X026 $ 218 2 3/8" 3/8" 3500 250 1
10C2.5X053G $ 223 10C2.5X026 $ 223 2.5 3/8" 3/8" 3500 250 1.1
10C3.15X053G $ 223 10C3.15X026 $ 223 3.15 1/2" 3/8" 3500 250 1.1
10C3.65X053G $ 227 10C3.65X026 $ 227 3.65 1/2" 3/8" 3500 250 1.2
10C4.2X053G $ 227 10C4.2X026 $ 227 4.2 1/2" 3/8" 3500 250 1.2
10C5X053G $ 227 10C5X026 $ 227 5 1/2" 3/8" 3000 250 1.2
10C5.7X053G $ 233 10C5.7X026 $ 233 5.7 1/2" 3/8" 3000 200 1.3
10C6.1X053G $ 233 10C6.1X026 $ 233 6.1 1/2" 3/8" 2500 200 1.3
10C7.4X053G $ 238 10C7.4X026 $ 238 7.4 1/2" 3/8" 2500 180 1.4
10C8.5X053G $ 238 10C8.5X026 $ 238 8.5 1/2" 3/8" 2000 150 1.5
10C9.8X053G $ 243 10C9.8X026 $ 243 9.8 1/2" 3/8" 2000 120 1.6

Seal Kits, Port Adaptors and Options

Part. List Price Description

GR105-SK $ 30 Seal Kit - Includes all seals for group 1 pumps


GR105-SS $7 Shaft Seal - Shaft seal only, suitable for group 1 pumps
G3/8 $ 32 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 30mm, Female 3/8" BSPP
G1/2 $ 32 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 30mm, Female 1/2" BSPP
A2A1 $ 138 Internal Relief - Positioned in the rear plate, Range 70-180 Bar
SP1 $ 280 Bearing Support - 1:8 Tapered input, 18mm Straight Keyed output
Shafts or Flanges $ 50 Spare Parts - A range of shafts and front flanges available
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Side View - Euro 4 Bolt, 1:8 Tapered, Flanged
053G Series 026 Series
29
52.4
20.3
2.4 9.4
4
25.4
72

9.35

1:8

Hydraulics International 27 www.hydraulicsint.com.au


EUROPEAN STANDARD GROUP 2

Standard: Shaft 1:8 Tapered, Mount 4 Bolt 36.5mm Spigot, R/H Rotation, Ports BSPP Threaded/Flanged

BSPP Threaded Ports Flanged Ports Specifications

Ports Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
20C4.5X687G $ 294 20C4.5X006 $ 294 4.5 1/2" 1/2" 3500 250 3.3
20C6.3X687G $ 294 20C6.3X006 $ 294 6.3 1/2" 1/2" 3500 250 3.4
20C8.2X687G $ 294 20C8.2X006 $ 294 8.2 1/2" 1/2" 3500 250 3.4
20C11X016G $ 303 20C11X006 $ 303 11.3 3/4" 1/2" 3500 250 3.6
20C14X016G $ 312 20C14X006 $ 312 14 3/4" 1/2" 3500 250 3.7
20C16X016G $ 312 20C16X006 $ 312 16 3/4" 1/2" 2500 250 3.8
20C19X016G $ 321 20C19X006 $ 321 19 3/4" 1/2" 2500 200 3.9
20C22X016G $ 321 20C22X006 $ 321 22 3/4" 1/2" 2000 180 4.1
20C25X016HG $ 339 20C25X006H $ 339 25 3/4" 1/2" 2500 160 4.5
20C28X016HG $ 365 20C28X006H $ 365 28 1" 3/4" 2500 130 4.6
20C32X016HG $ 380 20C32X006H $ 380 32 1" 3/4" 2000 120 4.9
20C36X016HG $ 399 20C36X006H $ 399 36 1" 3/4" 2000 100 5

Seal Kits, Port Adaptors and Options

Part. List Price Description

GR205-SK $ 48 Seal Kit - Includes all seals for group 2 pumps


GR205-SKV $ 99 Seal Kit Viton - Includes all seals for group 2 pumps
GR205-SS $9 Shaft Seal - Shaft seal only, suitable for group 2 pumps
GR205-SSV $ 18 Shaft Seal Viton- Shaft seal only, suitable for group 2 pumps
G1/2 $ 32 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 30mm, Female 1/2" BSPP
G3/4 $ 38 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 40mm, Female 3/4" BSPP
G1 $ 55 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 50.8mm, Female 1" BSPP
A2A1 or A2A3 $ 140 Internal Relief - Position in the rear cover, A2A1 Range 70-180 Bar, A2A3 Range 100-250 Bar
SP2 $ 350 Bearing Support - 1:8 Tapered input , 22mm Straight Keyed output
Shafts or Flanges $ 80 Spare Parts - A range of shafts and front flanges available
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Side View - Euro 4 Bolt, 1:8 Tapered, Flanged
016G Series 006 Series
27.4
3.2 12
17.4

36.5
96

16.65

1:8

4.8
71.4 39.5

Hydraulics International 28 www.hydraulicsint.com.au


EUROPEAN STANDARD GROUP 3

Standard: Shaft 1:8 Tapered, Mount 4 Bolt 50.8mm Spigot, R/H Rotation, Ports BSPP Threaded/Flanged

BSPP Threaded Ports Flanged Ports Specifications

Ports Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
30C20X163HG $ 506 30C20X146H $506 20 3/4" 3/4" 3000 250 8

PUMPS
30C25X163HG $ 516 30C25X146H $ 516 25 3/4" 3/4" 3000 250 8.2
30C32X163HG $ 540 30C32X146H $ 540 32 1" 3/4" 3000 250 8.8
30C36X163HG $ 552 30C36X146H $ 552 36 1" 3/4" 2800 250 9.1
30C42X163HG $ 565 30C42X146H $ 565 42 1" 3/4" 2500 230 9.3
30C46X163HG $ 571 30C46X146H $ 571 46 1" 3/4" 2300 230 9.6
30C50X163HG $ 577 30C50X146H $ 577 50 1" 3/4" 2100 200 9.8
30C55X163HG $ 589 30C55X146H $ 589 55 1" 3/4" 1750 200 9.9
30C60X163HG $ 603 30C60X146H $ 603 60 1" 3/4" 1750 180 10

Seal Kits, Port Adaptors and Options

Part. List Price Description

GR305-SK $ 70 Seal Kit - Includes all seals for group 3 pumps


GR305-SKH $ 79 Seal Kit - Includes all seals for group 3 pumps - H series
GR305-SKHV $ 94 Seal Kit with Viton Shaft Seal- Includes all seals for group 3 pumps - H series
GR305-SS $ 11 Shaft Seal - Shaft seal only, suitable for group 3 pumps
GR305-SSH $ 20 Shaft Seal - Shaft seal only, suitable for group 3 pumps - H series
GR305-SSHV $ 35 Shaft Seal Viton - Shaft seal only, suitable for group 3 pumps - H Series
G3/4 $ 38 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 40mm, Female 3/4" BSPP
G1 $ 55 Port Adaptor - Alloy Elbow 2 Bolt - Mount PCD 50.8mm, Female 1" BSPP
Shafts or Flanges $ 90 Spare Parts - A range of shafts and front flanges available
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Side View - Euro 4 Bolt, 1:8 Tapered, Flanged
163G Series 146 Series

4 21.6
50.8
128.1

1:8

4.8
98.4 47

Hydraulics International 29 www.hydraulicsint.com.au


AMERICAN/SAE STANDARD GROUP 2

Standard: Shaft 5/8" Keyed or Splined, Mount SAE A 2 Bolt 82.55mm Spigot, R/H Rotation, Ports BSPP Threaded

5/8" Keyed Shaft 5/8" 9T Splined Shaft Specifications

Ports - BSPP Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
20C4.5X030G $ 350 20C4.5X085G $ 350 4.5 1/2" 1/2" 3500 250 3.4
20C6.3X030G $ 350 20C6.3X085G $ 350 6.3 1/2" 1/2" 3500 250 3.5
20C8.2X030G $ 350 20C8.2X085G $ 350 8.2 1/2" 1/2" 3500 250 3.5
20C11X030G $ 350 20C11X085G $ 350 11.3 3/4" 1/2" 3500 250 3.7
20C14X030G $ 370 20C14X085G $ 370 14 3/4" 1/2" 3500 250 3.8
20C16X030G $ 370 20C16X085G $ 370 16 3/4" 1/2" 2500 250 3.9
20C19X030G $ 370 20C19X085G $ 370 19 3/4" 1/2" 2500 200 4
20C22X030G $ 370 20C22X085G $ 370 22 3/4" 1/2" 2000 180 4.2
20C25X030HG $ 394 20C25X085HG $ 394 25 3/4" 1/2" 2500 160 4.6
20C28X030HG $ 418 20C28X085HG $ 418 28 1" 3/4" 2500 130 4.7
20C32X030HG $ 445 20C32X085HG $ 445 32 1" 3/4" 2000 120 5
20C36X030HG $ 467 20C36X085HG $ 467 36 1" 3/4" 2000 100 5.1

Seal Kits and Options

Part. List Price Description

GR205-SK $ 48 Seal Kit - Includes all seals for group 2 pumps


GR205-SKV $ 99 Seal Kit Viton - Includes all seals for group 2 pumps
GR205-SS $9 Shaft Seal - Shaft seal only, suitable for group 2 pumps
GR205-SSV $ 18 Shaft Seal Viton- Shaft seal only, suitable for group 2 pumps
A2A1 or A2A3 $ 140 Internal Relief - Positioned in the rear cover - A2A1 Range 70-180 Bar, A2A3 Range 100-250 Bar
Shafts or Flanges $ 80 Spare Parts - A range of shafts and front flanges available
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - SAE A 2 Bolt Side View - SAE A 2 Bolt, 5/8” Keyed Side View - SAE A 2 Bolt, 5/8” 9T Splined
030G Series 085G Series
9T 16/32 DP-SAE

3.97
15.85

15.85

24 23.8
82.55

82.55

6.4 6.4

106.4 32.5 32.5

Hydraulics International 30 www.hydraulicsint.com.au


AMERICAN/SAE STANDARD GROUP 3

Standard: Shaft 7/8" Keyed or Splined, Mount SAE B 2 Bolt 101.6mm Spigot, R/H Rotation, Ports BSPP Threaded

7/8" Keyed Shaft 7/8" 13T Splined Shaft Specifications

Ports - BSPP Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
30C20X237HG $ 632 30C20X236HG $ 632 20 3/4" 3/4" 3000 250 8.5

PUMPS
30C25X237HG $ 645 30C25X236HG $ 645 25 3/4" 3/4" 3000 250 8.7
30C32X237HG $ 674 30C32X236HG $ 674 32 1" 3/4" 3000 250 9.3
30C36X237HG $ 691 30C36X236HG $ 691 36 1" 3/4" 2800 250 9.6
30C42X237HG $ 705 30C42X236HG $ 705 42 1" 3/4" 2500 230 9.8
30C46X237HG $ 711 30C46X236HG $ 711 46 1" 3/4" 2300 230 10.1
30C50X237HG $ 722 30C50X236HG $ 722 50 1" 3/4" 2100 200 10.3
30C55X237HG $ 732 30C55X236HG $ 732 55 1" 3/4" 1750 200 10.4
30C60X237HG $ 753 30C60X236HG $ 753 60 1" 3/4" 1750 180 10.6

Seal Kits and Options

Part. List Price Description

GR305-SK $ 70 Seal Kit - Includes all seals for group 3 pumps


GR305-SKH $ 79 Seal Kit - Includes all seals for group 3 pumps - H series
GR305-SS $ 11 Shaft Seal - Shaft seal only, suitable for group 3 pumps
GR305-SSH $ 20 Shaft Seal - Shaft seal only, suitable for group 3 pumps - H series
GR305-SSHV $ 35 Shaft Seal Viton - Shaft seal only, suitable for group 3 pumps - H series
Shafts or Flanges $ 90 Spare Parts - A range of shafts and front mounts available
Rotation $ 10 Rotation - Rotation change from standard
Modification $ 40 Modification - Special design charges may vary

Front View - SAE B 2 Bolt Side View - SAE B 2 Bolt, 7/8” Keyed, BSPP Side View - SAE B 2 Bolt, 7/8” 13T Splined, BSPP
237G Series 236G Series

6.35
101.6

101.6
22.2

21.8
SAE-B 7/8 13T 16/32 DP

9.5 9.5

146 41.2 41

Hydraulics International 31 www.hydraulicsint.com.au


GERMAN STANDARD GROUP 2
Standard: Combinations

4 Bolt 80mm Spigot 2 Bolt KHD 50mm Spigot 2 Bolt IHC 50mm Spigot
Specifications
1:5 Taper, Flange Ports, L/H 1:5 Taper, Flange Ports, L/H 1:5 Taper, Flange Ports, L/H

Ports-Flanged Speed Pressure


List List List CC/
Part. Part. Part. Max Cont Max Cont
Price Price Price Rev Inlet Outlet RPM Bar
20A4.5X086 $ 397 20A4.5X007 $ 440 20A4.5X008 $ 440 4.5 G206 G205 3500 250
20A6.3X086 $ 397 20A6.3X007 $ 440 20A6.3X008 $ 440 6.3 G206 G205 3500 250
20A8.2X086 $ 410 20A8.2X007 $ 452 20A8.2X008 $ 452 8.2 G206 G205 3500 250
20A11X086 $ 410 20A11X007 $ 452 20A11X008 $ 452 11 G206 G205 3500 250
20A14X086 $ 433 20A14X007 $ 464 20A14X008 $ 464 14 G206 G205 3500 250
20A16X086 $ 433 20A16X007 $ 464 20A16X008 $ 464 16 G206 G205 2500 250
20A19X086 $ 444 20A19X007 $ 477 20A19X008 $ 477 19 G206 G205 2500 200
20A22X086 $ 444 20A22X007 $ 477 20A22X008 $ 477 22 G206 G205 2000 180
20A25X086H $ 455 20A25X007H $ 483 20A25X008H $ 483 25 G206 G205 2500 160

4 Bolt 80mm Spigot, L/H 2 Bolt KHD 50mm Spigot, L/H 2 Bolt SAE A 82.55mm Spig, R/H
Specifications
16.5mm 9T Splined , Flange Ports 16.5mm 9T Splined, Flanged Ports 5/8" 9T Splined, Flanged Ports

Speed Pressure
List List List CC/ Ports-Flanged
Part. Part. Part. Max Cont Max Cont
Price Price Price Rev Inlet Outlet
RPM Bar
20A4.5X021 $ 433 20A4.5X205 $ 433 20C4.5X104 $ 350 4.5 G206 G205 3500 250
20A6.3X021 $ 433 20A6.3X205 $ 433 20C6.3X104 $ 350 6.3 G206 G205 3500 250
20A8.2X021 $ 446 20A8.2X205 $ 446 20C8.2X104 $ 350 8.2 G206 G205 3500 250
20A11X021 $ 446 20A11X205 $ 446 20C11X104 $ 350 11 G206 G205 3500 250
20A14X021 $ 469 20A14X205 $ 469 20C14X104 $ 370 14 G206 G205 3500 250
20A16X021 $ 469 20A16X205 $ 469 20C16X104 $ 370 16 G206 G205 2500 250
20A19X021 $ 480 20A19X205 $ 480 20C19X104 $ 370 19 G206 G205 2500 200
20A22X021 $ 480 20A22X205 $ 480 20C22X104 $ 370 22 G206 G205 2000 180
20A25X021H $ 491 20A25X205H $ 491 20C25X104H $ 394 25 G206 G205 2500 160

Seal Kits Port Adaptors and Options

Part. List Description Part. List Description


GR205-SK $ 48 Seal Kit G205 $ 45 Port Adaptor - Alloy Elbow 4 Bolt - Mount PCD 35mm, Female 1/2" BSPP
GR205-SKV $ 99 Seal Kit Viton G206 $ 49 Port Adaptor - Alloy Elbow 4 Bolt - Mount PCD 40mm, Female 3/4" BSPP
GR205-SS $9 Shaft Seal Rotation $ 10 Rotation - Rotation change from standard
GR205-SSV $ 18 Shaft Seal Viton Modification $ 40 Modification - Special design charges may vary

Front/Side View - German 4 Bolt, 1:5 Taper Front/Side View - German KHD or IHC 2 Bolt, 1:5 Taper
086 Series 007 Series - KHD 008 Series - IHC
24.8
72 10.8 3 3

3
dia 16.397

dia 50
dia 80

60

60

1:5
100

dia 16.397

1:5

7.2 60 60 7.2
38
40.2
Front/Side View - German 4 Bolt, 16.5mm 9T Spline Front/Side View - SAE A 2 Bolt, 5/8 9T Spline
021 Series 104 Series
23.5
72

Spline B17x14-9T 9T 16/32 DP-SAE


DIN5482 23.8
dia 15.85
dia 82.55
dia 16.5
dia 80
100

18

6.4
32

7.2 106.4

Hydraulics International 32 www.hydraulicsint.com.au


GERMAN STANDARD GROUP 3
Standard: Shaft 1:5 Tapered, Mount 4 Bolt 105mm Spigot, L/H Rotation, Ports Flanged "German Design"

Part Number & Pricing Specifications

List Ports - UNF Speed Pressure Weight


Part. CC/Rev
Price Suction Pressure Max Cont - RPM Max Cont - Bar Kg
30A25X337H $ 722 25 G206 G206 3000 250 9.4
30A32X337H $ 732 32 G207 G207 3000 250 10
30A36X337H $ 748 36 G207 G207 2800 250 10.3
30A42X337H $ 755 42 G207 G207 2500 230 10.5

PUMPS
30A46X337H $ 762 46 G207 G207 2300 230 10.8
30A50X337H $ 768 50 G207 G207 2100 200 11

Front View - German 4 Bolt, 1:5 Tapered Side View - German 4 Bolt, 1:5 Tapered, Flanged
337 Series 337 Series

25

105
1:5
145

51
102

SPECIAL DESIGN GROUP 3, "SAE A" MOUNTING


Standard: Shaft 7/8" 13T Splined, Mount SAE A 2 Bolt 82.55mm Spigot, R/H Rotation, Ports BSPP Threaded

Part Number & Pricing Specifications

List Ports - BSPP Speed Pressure Weight


Part. CC/Rev
Price Suction Pressure Max Cont - RPM Max Cont - Bar Kg
30C32X263W $ 740 32 1" 3/4" 2500 200 5.9
30C36X263W $ 750 36 1" 3/4" 2500 190 6.1
30C42X263W $ 765 42 1" 3/4" 2300 190 6.5
30C46X263WH $ 785 46 1" 3/4" 2300 175 6.7
30C50X263WH $ 795 50 1" 3/4" 2100 175 6.9
30C55X263WH $ 815 55 1" 3/4" 1750 175 7

Rear View - SAE A 2 Bolt, 7/8” 13T Splined, BSPP Side View - SAE A 2 Bolt, 7/8” 13T Splined
263W Series 263W Series
106.4
22.2

82.55

33.3

44
3.96 SAE B 7/8 13T 16/32 DP

39.9

Hydraulics International 33 www.hydraulicsint.com.au


SPECIAL DESIGN GROUP 2, 3/4" SPLINED/KEYED SHAFT

Standard: Shaft 3/4" 11T Splined, Mount SAE A 2 Bolt 82.55mm Spigot, R/H Rotation, Ports UNF Threaded

Part Number & Pricing Specifications

List Ports - UNF Speed Pressure Weight


Part. CC/Rev
Price Suction Pressure Max Cont - RPM Max Cont - Bar Kg
20C16X550HU $ 456 16 1.1/16" 7/8" 3500 250 4.2
20C19X550HU $ 466 19 1.1/16" 7/8" 3500 230 4.3
20C22X550HU $ 472 22 1.1/16" 7/8" 3500 200 4.5
20C25X550HU $ 482 25 1.1/16" 7/8" 3500 200 4.9
20C28X550HU $ 514 28 1.5/16" 1.1/16" 2500 170 5
20C32X550HU $ 524 32 1.5/16" 1.1/16" 2500 150 5.3
20C36X550HU $ 534 36 1.5/16" 1.1/16" 2500 120 5.4

Top View - SAE A 2 Bolt, 3/4” 11T Splined Side View - SAE A 2 Bolt, 3/4” 11T Splined, UNF OPTIONS
550HU Series 550HU Series
List
Code Description
Price
11T 16/32 DP-SAE J498
40 3/4"(19.03)
853HDU -
31 Keyed Shaft
GR205HU $ 59 Seal Kit

82.55
19
6.4

38

SPECIAL DESIGN GROUP 2, 17MM 10T SPLINED SHAFT


Standard: Shaft 17mm 10T Splined, Mount SAE A 2 Bolt 82.55mm Spigot, R/H Rotation, Ports BSPP Threaded

Part Number & Pricing Specifications

List Ports - BSPP Speed Pressure Weight


Part. CC/Rev
Price Suction Pressure Max Cont - RPM Max Cont - Bar Kg
20C8.2X554G $ 440 8.2 1/2" 1/2" 3500 250 3.5
20C11X554G $ 448 11.3 3/4" 1/2" 3500 250 3.7
20C14X554G $ 456 14 3/4" 1/2" 3500 250 3.8
20C16X554G $ 456 16 3/4" 1/2" 2500 250 3.9
20C19X554G $ 466 19 3/4" 1/2" 2500 200 4
20C22X554G $ 472 22 3/4" 1/2" 2000 180 4.2
20C25X554HG $ 482 25 3/4" 1/2" 2500 160 4.6
20C28X554HG $ 514 28 1" 3/4" 2500 130 4.7
20C32X554HG $ 524 32 1" 3/4" 2000 120 5

Top View - SAE A 2 Bolt, 17mm 10T Splined Side View - SAE A 2 Bolt, 17mm 10T Splined, BSPP Option - SAE Ports avail in limited sizes
554G Series 554G Series 464 Series Add $64 List

10T 16/32 DP-SAE

31
17

82.55

22

6.4

34.5
106
Seal Kit Part Number - GR205-SK - List $48

Hydraulics International 34 www.hydraulicsint.com.au


PUMPS WITH PRIORITY GROUP 2 "JOHN DEER"

Standard: Shaft Extened 1:5 Tapered, Mount SAE A 2 Bolt 82.55mm Spigot, L/H Rotation, Rear Ports BSPP/UNF Threaded

Part Number & Pricing Specifications

Ports Speed Priority Set


List Weight
Part. CC/Rev S1 - Suction P1 - Priority P2 - Rest Max Cont Flow Pressure
Price Kg
BSPP UNF UNF RPM LPM Bar

20CA16X410N $ 670 16 3/4" 3/4" 7/8" 2500 12 100 5.5

PUMPS
Side View - SAE A 2 Bolt, 1:5 Taper Rear View - Priority SAE A 2 Bolt Schematic
410 Series 410 Series
53
36.5
4.8
P2 P1
2 1

P1
1.9

Side View - SAE A 2 Bolt, 1:5 Taper Rear View - Priority SAE A 2 Bolt Schematic
410 Series 410 Series P2
Ø88

53
Ø17.4
Ø16.397

S1
36.5 +0.2 S1

4.8
1:5 P2 P1
2 1
1.9-0.1

P1

S1
-0.01
-0.05

P2
Ø88

PUMPS WITH PRIORITY


Ø16.397

Ø17.4 -0.025

S1

1:5
GROUP 2 "NISSAN"
Standard: Shaft 17mm 10T Splined, Mount SAE 2 Bolt A 82.55mm Spigot, R/H Rotation, Rear Ports BSPP/UNF Threaded

Part Number & Pricing Specifications

Ports Speed Priority Set


List Weight
Part. CC/Rev S1 - Suction P1 - Priority P2 - Rest Max Cont Flow Pressure
Price Kg
BSPP UNF UNF RPM LPM Bar

20C25X512N $ 690 25 3/4" 3/4" 7/8" 2500 12 125 5.9

Side View - SAE A 2 Bolt, 17mm 10T Rear View - Priority SAE A 2 Bolt Schematic
512 Series 512 Series
P2 P1
2 1
Ø 82.55 -0.05
Ø 17mm

22
S1
29

P2 S1

P1

Hydraulics International 35 www.hydraulicsint.com.au


SPECIAL MULTIPLE PUMPS "MASSEY FERGUSON"
300 SERIES DOUBLE PUMP
Standard: Shaft 1:8 Tapered, Mount 2 Bolt 52.34mm Spigot, L/H Rotation, Ports METRIC Thread

Part Number & Pricing Specifications

Ports - BSPP/UNO
Speed Pressure
List Weight
Part. CC/Rev # Front Pump Suction uses Flange 37.9 BC Max Cont Max Cont
Price Kg
RPM Bar
Suction Pressure
22A11/8.2X349 $ 898 11/8.2 M18 M18 4000 200 8

119 185 max


60 59 131.6
50.52 49.48 44.5 11.75
27.4
3 15.8

9.45
31.1

Ø10.3

15.7
RETURN
26.9

14.3

IN
31.4

3/8"-16UNC

Ø16.6
-2B FLOW
98

M18x1.5-6H M18x1.5-6H
ISO 6149 ISO 6149

19 14.7
42.4 43.6 31.5 4.5
10
48.5

2 x M8x1.25-6H
M18x1.5-6H
ISO 6149
39.7

20
15.7

52.34
12
42.5
131.6

SPECIAL MULTIPLE PUMPS "LOG SPLITTER" HIGH LOW DESIGN


Standard: Shaft 1:8 Tapered, Mount 4 Bolt 36.5mm Spigot, R/H Rotation, Ports BSPP/Flanged

Part Number & Pricing Specifications

CC/Rev CC/Rev Ports - BSPP/Flanged


Pressure Pressure Flow
List Low High
Part. Suction Suction Pressure (U) Unload Max (RV) Max (KR)
Price Pressure Pressure
Top Pump Bottom Pump Tank (T) Bar Bar LPM
Combined Single
Flanged Flanged BSPP
22C4.5X067F/8.2X066 $ 880 12.7 4.5 1/2" 1/2" 1/2" 35 320 35

22C4.5X067F/11X066 $ 920 15.5 4.5 1/2" 3/4" 1/2" 35 320 35

22C6.3X067F/19X066 $ 980 25.3 6.3 1/2" 3/4" 1/2" 35 320 35

4X 71.4
Ø9 U
110 max

RV 200 Bar
T
M1
165 max

35 Bar
M2 KR
M2
96

P1 P2 T
Ø36.5f7

M1
35 bar
200 bar
U

50 39.5
141

Hydraulics International 36 www.hydraulicsint.com.au


MULTIPLE GEAR PUMPS GROUP 1

GROUP ROTATION DISPLACEMENT CC DESIGN CODE


X
OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 – GROUP OPTION 2 – ROTATION OPTION 3 – DISPLACEMENT OPTION 4 – DESIGN CODE

Code Description Code Description Code SEE OPTION 4 - BELOW

11 GROUP 1+1 C CLOCKWISE 1 2.5 5 IMPORTANT - REPEAT OPTIONS 3 & 4


FOR 2ND & 3RD STAGE PUMP COMBO'S

PUMPS
111 GROUP 1+1+1 A ANTI-CLOCKWISE 1.25 3.15 5.7 EXAMPLE 11C4.2X181G/3.15X182G
1.6 3.65 6.1
2 4.2

Base Pricing Table - Priced to suit 1:8 Tapered, Euro 4 Bolt

Displacement Front Pump Middle Pump Rear Pump


GP1 List Price List Price List Price
1 $ 335 $ 335 $ 247
1.25 $ 335 $ 335 $ 247
1.6 $ 346 $ 346 $ 247
2 $ 350 $ 350 $ 250
2.5 $ 356 $ 356 $ 252
3.15 $ 366 $ 366 $ 252
3.65 $ 376 $ 376 $ 252
4.2 $ 387 $ 387 $ 252
5 $ 397 $ 397 $ 252
5.7 $ 408 $ 408 $ 264
6.1 $ 418 $ 418 $ 264

Option 4 - Design Coding System

Design Codes for - Group 1 + Group 1 + Group 1 Front Middle Rear


Shafts Mounting Ports Code Code Code
1:8 Tapered 4 Bolt Euro BSPP Threaded ports 181G 303G 182G
1:8 Tapered 4 Bolt Euro Flanged ports - Square pattern 174 303 175

Seal Kit and Options

Part. List Price Description


GR105-SK $ 30 Seal Kit - Includes all seals for a single group 1 section of a multiple pump, one kit per section required
Rotation $ 10 Rotation - Rotation change from standard, per pump
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Taper Side View - Euro 4 Bolt, 1:8 Taper, BSPP Flanged Port Option
181G / 182G Series 174 / 175 Series
52.4 29
20.3
2.4

4
182G 181G
25.4
72

9.35

1:8

Hydraulics International 37 www.hydraulicsint.com.au


MULTIPLE GEAR PUMPS GROUP 2

GROUP ROTATION DISPLACEMENT CC DESIGN CODE


X
OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 – GROUP OPTION 2 – ROTATION OPTION 3 – DISPLACEMENT OPTION 4 – DESIGN CODE


Code Description Code Description Code SEE OPTION 4 - BELOW
21 GROUP 2+1 C CLOCKWISE 4.5 16 IMPORTANT - REPEAT OPTIONS 3 & 4
FOR 2ND & 3RD STAGE PUMP COMBO'S
22 GROUP 2+2 A ANTI-CLOCKWISE 6.3 19 EXAMPLE 22C16X111G/8.2X110G
211 GROUP 2+1+1 8.2 22
221 GROUP 2+2+1 11.3 25
222 GROUP 2+2+2 14

Base Pricing Table - Priced to suit 1:8 Tapered, Euro 4 Bolt, Additional options available below

Displacement Front Pump Middle Pump Rear Pump


GP2 GP1 GP2 - List GP2- List GP1 - List GP2- List GP1 - List
4.5 1 $ 399 $ 399 $ 335 $ 348 $ 247
6.3 1.25 $ 420 $ 420 $ 335 $ 348 $ 247
8.2 1.6 $ 441 $ 441 $ 346 $ 348 $ 247
11 2 $ 461 $ 461 $ 350 $ 348 $ 250
14 2.5 $482 $ 482 $ 356 $ 358 $ 252
16 3.15 $ 503 $ 503 $ 366 $ 358 $ 252
19 3.65 $ 513 $ 513 $ 376 $ 368 $ 252
22 4.2 $ 524 $ 524 $ 387 $ 368 $ 252
25 5 $ 546 $ 546 $ 397 $ 380 $ 252
5.7 $ 408 $ 264
6.1 $ 418 $ 264

Option 4 - Design Coding System

Design Codes for - Group 2 + Group 1 Front List Middle Rear


Shafts Mounting Flanges Ports Code Add Code Code
1:8 Tapered 4 Bolt Euro BSPP Threaded ports 141G - - 142G
1:8 Tapered 4 Bolt Euro Flanged ports - Diamond pattern 168 - - 179

Design Codes for - Group 2 + Group 2 + Group 2 Front List Middle Rear
Shafts Mounting Flanges Ports Code Add Code Code
1:8 Tapered 4 Bolt Euro BSPP Threaded ports 111G - 156G 110G
1:8 Tapered 4 Bolt Euro Flanged ports - Diamond pattern 067 - 156 066
1:8 Tapered 4 Bolt Euro Single suction in second pump, 3/4" BSPP Threaded - - - 723GF
1:8 Tapered 4 Bolt Euro Single suction in first pump, 3/4" BSPP Threaded 638G2F - - 639G2
1:8 Tapered 4 Bolt Euro Single suction in first pump, 1" BSPP Threaded 638G112F - - 639G2
1:5 Tapered 4 Bolt German Flanged German ports - Square pattern 158 $ 90 156B 161
1:5 Tapered 2 Bolt German KHD Flanged German ports - Square pattern 095 $ 100 156B 097
1:5 Tapered 4 Bolt German Single suction in first pump, German flanged ports - $ 90 - 280S
16.5mm 9T Splined 4 Bolt German Flanged German ports - Square pattern 124 $ 100 156B 077
16.5mm 9T Splined 2 Bolt German KHD Flanged German ports - Square pattern 096 $ 110 156B 097
5/8" Keyed 2 Bolt SAE A BSPP Threaded ports 457G $ 86 156G 110G
5/8" 9T Splined 2 Bolt SAE A BSPP Threaded ports 167G $ 86 156G 110G
5/8" 9T Splined 2 Bolt SAE A Flanged German ports - Square pattern 468 $ 86 156B 077
17mm 10T Splined 2 Bolt SAE A BSPP Threaded ports 574G $ 96 156G 110G
17mm 15T Splined 4 Bolt German Flanged German ports - Square pattern 259 $ 110 156B 097
3/4" 11T Splined 2 Bolt SAE A UNO Threaded ports 656DU $ 130 - 110U

Seal Kits and Options


Part. List Price Description
GR205F-SK $ 57 Seal Kit - Includes all seals for a group 2 front pump
GR205M-SK $ 48 Seal Kit - Includes all seals for a group 2 middle pump that is being used in a group 2+2+2 arrangement
GR205R-SK $ 42 Seal Kit - Includes all seals for a group 2 rear pump that is being used in a group 2+2 or 2+2+2 arrangement
GR205FHU-SK $ 68 Seal Kit - Series '656DU' only, Includes all seals for the front pump section, the rear pump will require kit GR205R-SK listed above
GR105-SK $ 30 Seal Kit - Includes all seals for a group 1 rear section that is being used in a group 2+1 arrangement
Rotation $ 10 Rotation - Rotation change from standard, per pump
Modification $ 40 Modification - Special design charges may vary

Hydraulics International 38 www.hydraulicsint.com.au


MULTIPLE GEAR PUMPS GROUP 2

Front View - Euro 4 Bolt, Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Flange Port Option
111G / 110G Series 067 / 066 Series
27.4
3.2 12
110G 111G

17.4

36.5
96

25.4
1:8

4.8

PUMPS
39.5

71.4

Front View - German 4 Bolt, Tapered Side View - German 4 Bolt, 1:5 Tapered, Flanged Option - KHD 2 Bolt
158 / 161 Series 24.8 16.5mm 9T Splined
72 10.8 096 Series
3
161 158
Spline B17x14 9T

16.39
DIN5482

16.5

50.7
80
1:5 18
100

7.2
7.2
38 26

Front View - German 4 Bolt, Splined Side View - German 4 Bolt, 17mm 15T Splined, Flanged
259 / 097 Series
72

15Teeth
097 259 JIS D2001
16.8

80
100

7.2
40.2

Front View - SAE A 2 Bolt, Splined Side View - SAE A 2 Bolt, 5/8” 9T Splined, BSPP Option - 5/8” Keyed
167G / 110G Series 457G Series
82.55

82.55
15.85

110G 167G
15.85

23.8 24
17.62
9T 16/32 DP-SAE

6.4 6.4
32 32.5

106.4

Front View - SAE A 2 Bolt, Splined Side View - SAE A 2 Bolt, 17mm 10T Splined, BSPP Option - 3/4” 11T Splined
574G / 110G Series 656U Series

40
110G 574G
23.8 31
17.04

82.55
82.55

19
11T 16/32 DP
10T 16/32 DP
SAE J498

SAE J498

6.4 6.4

34.5 38

106.4

Hydraulics International 39 www.hydraulicsint.com.au


MULTIPLE GEAR PUMPS GROUP 3

GROUP ROTATION DISPLACEMENT CC DESIGN CODE


X
OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 – COMBINATIONS OPTION 2 – ROTATION OPTION 3 – DISPLACEMENT OPTION 4 – DESIGN CODE


Code Description Code Description Code SEE OPTION 4 - BELOW
32 GROUP 3+2 C CLOCKWISE 20 46 IMPORTANT - REPEAT OPTIONS 3 & 4
FOR 2ND & 3RD STAGE PUMP COMBO'S
33 GROUP 3+3 A ANTI-CLOCKWISE 25 50 EXAMPLE 33C55X241HG/32X242HG
322 GROUP 3+2+2 32 55
333 GROUP 3+3+3 36 60
42

Base Pricing Table - Priced to suit 1:8 Tapered, Euro 4 Bolt

Displacement Front Pump Middle Pump Rear Pump


GP3 GP2 GP3 - List GP3- List GP2 - List GP3- List GP2 - List
20 4.5 $ 805 $ 805 $ 399 $ 562 $ 348
25 6.3 $ 836 $ 836 $ 420 $ 573 $ 348
32 8.2 $ 857 $ 857 $ 441 $ 600 $ 348
36 11 $ 888 $ 888 $ 461 $ 613 $ 348
42 14 $ 929 $ 929 $ 482 $ 627 $ 358
46 16 $ 960 $ 960 $ 503 $ 634 $ 358
50 19 $ 1002 $ 1002 $ 513 $ 641 $ 368
55 22 $ 1033 $ 1033 $ 524 $ 654 $ 368
60 25 $ 1073 $ 1073 $ 546 $ 673 $ 380

Option 4 - Design Coding System

Design Codes for - Group 3 + Group 2 Front List Middle Rear


Shafts Mounting Flanges Ports Code Add Code Code
1:8 Tapered 4 Bolt Euro BSPP Threaded ports 198G - - 201G
7/8" 13T Splined 2 Bolt SAE B BSPP Threaded ports 245HG - - 201G

Design Codes for - Group 3 + Group 3 + Group 3 Front List Middle Rear
Shafts Mounting Flanges Ports Code Add Code Code
1:8 Tapered 4 Bolt Euro BSPP Threaded ports 241HG - 324HG 242HG
1:8 Tapered 4 Bolt Euro Flanged ports - Diamond pattern 241H - 324H 242H
7/8" Keyed 2 Bolt SAE B BSPP Threaded ports 345HG $ 150 324HG 242HG
7/8" Keyed 2 Bolt SAE B Flanged ports - Diamond pattern 345H $ 150 324H 242H
7/8" 13T Splined 2 Bolt SAE B BSPP Threaded ports 309HG $ 150 324HG 242HG
7/8" 13T Splined 2 Bolt SAE B Flanged ports - Diamond pattern 309H $ 150 324H 242H

Seal Kits and Options


Part. List Price Description
GR305F-SKH $ 99 Seal Kit - Includes all seals for a group 3 front pump
GR305MR-SKH $ 70 Seal Kit - Includes all seals for a group 3 middle or rear pump
GR205R-SK $ 40 Seal Kit - Includes all seals for a group 2 rear pump that is being used in a group 3+2 arrangement
Rotation $ 10 Rotation - Rotation change from standard, per pump

Option - SAE B 2 Bolt


Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP
7/8” 13T Splined
241HG / 242HG Series
11.3 309HG Series

4 242HG 241HG
21.6

SAE-B 7/8 13T 16/32 DP


50.8

101.6
21.8
128.1

33.3
1:8

4.8

9.5
47 41

98.4

Hydraulics International 40 www.hydraulicsint.com.au


GEAR MOTORS GROUP 1

Standard: Bi-Rotational Shaft 1:8 Tapered, Mount 4 Bolt 25.4mm Spigot, Ports BSPP Threaded

Part Number & Pricing Specifications

Ports - BSPP Speed Pressure


List Weight
Part. CC/Rev Max Cont Max Cont
Price Suction Pressure Kg
RPM Bar

GEAR MOTORS
10MR1.6X563G $ 290 1.6 3/8" 3/8" 3500 210 1

10MR2X563G $ 290 2 3/8" 3/8" 3500 210 1

10MR2.5X563G $ 296 2.5 3/8" 3/8" 3500 210 1.1

10MR3.15X563G $ 296 3.15 1/2" 1/2" 3500 210 1.1

10MR3.65X563G $ 302 3.65 1/2" 1/2" 3500 210 1.2

10MR4.2X563G $ 302 4.2 1/2" 1/2" 3500 210 1.2

10MR5X563G $ 302 5 1/2" 1/2" 3500 210 1.2

10MR5.7X563G $ 309 5.7 1/2" 1/2" 3000 200 1.3

10MR6.1X563G $ 309 6.1 1/2" 1/2" 3000 200 1.3

10MR7.4X563G $ 316 7.4 1/2" 1/2" 2500 180 1.4

10MR8.5X563G $ 316 8.5 1/2" 1/2" 2500 150 1.5

10MR9.8X563G $ 330 9.8 1/2" 1/2" 2000 120 1.5

Seal Kits and Options

Part. List Price Description


GM1-SKV $ 40 Seal Kit Viton - Includes all seals for group 1 motors
GM1-SKT $ 55 Seal Kit High Pressure - Includes all seals for group 1 motors, 30 Bar shaft seal rating
GM1-SSV $ 16 Shaft Seal Viton - Shaft seal only, suitable for group 1 motors
GM1-SST $ 19 Shaft Seal High Pressure - Shaft seal only, suitable for group 1 motors, 30 Bar shaft seal rating
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Rear View - With Case Drain
563G Series 563G Series
29
52.4
20.3
2.4
9.4
4
25.4

G1/4
72

9.35

1:8

Drain Connection ( Pdrain 0.5 bar )


Always connect directly to tank

Hydraulics International 41 www.hydraulicsint.com.au


GEAR MOTORS GROUP 2

Standard: Bi-Rotational, Ports BSPP Threaded

1:8 Taper, 4 Bolt Euro 5/8" Keyed, SAE A 2 Bolt Specifications

Ports - BSPP Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar
20MR6.3X543G $ 412 20MR6.3X553G $ 412 6.3 1/2" 1/2" 3500 200 3.4
20MR8.2X543G $ 422 20MR8.2X553G $ 422 8.2 1/2" 1/2" 3500 200 3.5
20MR11X543G $ 422 20MR11X553G $ 422 11.3 3/4" 3/4" 3500 200 3.6
20MR14X543G $ 432 20MR14X553G $ 432 14 3/4" 3/4" 3500 200 3.7
20MR16X543G $ 432 20MR16X553G $ 432 16 3/4" 3/4" 3500 200 3.8
20MR19X543G $ 444 20MR19X553G $ 444 19 3/4" 3/4" 2500 180 4
20MR22X543G $ 444 20MR22X553G $ 444 22 3/4" 3/4" 2500 180 4.1
20MR25X543HG $ 475 20MR25X553GH $ 475 25 3/4" 3/4" 2000 160 4.5
20MR28X543HG $ 495 20MR28X553GH $ 495 28 3/4" 3/4" 2000 130 4.6

Seal Kits and Options

Options List Price Description

GM2-SKV $ 55 Seal Kit Viton - Includes all seals for group 2 motors

GM2-SKT $ 75 Seal Kit High Pressure - Includes all seals for group 2 motors, 30 Bar shaft seal rating

GM2-SSV $ 18 Shaft Seal Viton - Shaft seal only, suitable for group 2 motors

GM2-SST $ 22 Shaft Seal High Pressure - Shaft seal only, suitable for group 2 motors, 30 Bar shaft seal rating

1:5 Tapered Shaft $ 40 Shaft Option - Call office for part number and availability
Seal Kits
16.5mm 9T Splined Shaft $ 40 Shaft Option - Call office for part number and availability
5/8" 9T Splined Shaft $ 40 Shaft Option - Call office for part number and availability
4 Bolt Mount - 80mm Spigot $ 50 Mount Option - Call office for part number and availability
2 Bolt Mount KHD - 50mm Spigot $ 50 Mount Option - Call office for part number and availabilty
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Rear View - With Drain Connection
543G Series 543G Series Represents all Group 2 Motors
27.4
3.2 12
17.4

36.5

G1/4
96

16.65

1:8

4.8
39.5
71.4 # Drain Connection ( Pdrain 0.5 bar )
Always connect directly to tank

Front View - SAE A 2 Bolt, 5/8 Keyed Side View - SAE A 2 Bolt, 5/8 Keyed, BSPP Option - 5/8” 9T Splined
553G Series 553G Series 553G/9T Series

3.97
24 23.8
9T 16/32 DP-SAE
82.55
15.85

15.85

82.55

6.4 6.4

32.5 32
106.4

Hydraulics International 42 www.hydraulicsint.com.au


GEAR MOTORS GROUP 3

Standard: Bi-Rotational, Ports BSPP Threaded

1:8 Taper, 4 Bolt Euro 7/8" Keyed, SAE B 2 Bolt Specifications

Ports - BSPP Speed Pressure


List List Weight
Part. Part. CC/Rev Max Cont Max Cont
Price Price Suction Pressure Kg
RPM Bar

GEAR MOTORS
30MR20X568G $ 674 30MR20X237G $ 754 20 3/4" 3/4" 2500 200 8.3
30MR25X568G $ 687 30MR25X237G $ 767 25 3/4" 3/4" 2500 200 8.5
30MR32X568G $ 720 30MR32X237G $ 800 32 1" 1" 2500 200 9
30MR36X568G $ 735 30MR36X237G $ 815 36 1" 1" 2300 200 9.3
30MR42X568G $ 752 30MR42X237G $ 832 42 1" 1" 2300 200 9.6
30MR46X568G $ 760 30MR46X237G $ 840 46 1" 1" 2100 200 9.8
30MR50X568G $ 769 30MR50X237G $ 849 50 1" 1" 2100 200 9.9
30MR55X568G $ 784 30MR55X237G $ 864 55 1" 1" 1750 200 10.1
30MR60X568HG $ 804 30MR60X237HG $ 884 60 1" 1" 1750 180 10.3

Seal Kits and Options

Part. List Price Description


GM3-SKV $ 94 Seal Kit with Viton Shaft Seal - Includes all seals for group 3 motors
GM3-SKT $ 122 Seal Kit High Pressure - Includes all seals for group 3 motors, 30 Bar shaft seal rating
GM3-SSV $ 35 Shaft Seal Viton - Shaft seal only, suitable for group 3 motors
GM3-SST $ 45 Shaft Seal High Pressure - Shaft seal only, suitable for group 3 motors, 30 Bar shaft seal rating
7/8" 13T Splined Shaft $ 40 Shaft Option - Call office for part number and availability
Modification $ 40 Modification - Special design charges may vary

Front View - Euro 4 Bolt, 1:8 Tapered Side View - Euro 4 Bolt, 1:8 Tapered, BSPP Rear View - With Drain Connection
568G Series 568G Series Represents all Group 3 Motors

21.6
50.8
128.1

G1/4
1:8

Drain Connection ( Pdrain 0.5 bar )


4.8
Always connect directly to tank
98.4 47

Front View - SAE B 2 Bolt, 7/8” Keyed Side View - SAE B 2 Bolt, 7/8” Keyed, BSPP Option - 7/8” 13T Splined
237G Series 237G Series 237G/13T Series
SAE B 7/8 13T 16/32 DP
101.6

101.6
22.2

21.8

9.5 9.5

146 41.2 41

Hydraulics International 43 www.hydraulicsint.com.au


VANE PUMPS VARIABLE DISPLACEMENT, PRESSURE COMP
Standard: Mount Flange or Subplate Mounted

Flange Mounted Subplate Mounted Specifications

Ports - Flange Mount Only Shaft Speed Pressure


List List
Part. Part. CC/Rev Keyed Range Max Cont
Price Price Suction Pressure mm RPM Bar
PV2V3-30/
$ 1968 - 12 1/2" 3/8" 18 100
12RA01MC100A1 -
PV2V3-30/ PV6V3-30/
$ 2368 $2460 25 3/4" 1/2" 19 100
25RA01MC100A1 25RA08MC100A1
1000 -1800
PV2V3-20/ PV6V3-20/
$ 3544 $3668 40 1.1/8" 3/4" 28 100
40RA01MC100A1 40RA08MC100A1
PV2V3-20/ PV6V3-20/
$ 4262 $4388 63 1.1/4" 1" 32 100
63RA01MC100A1 63RA08MC100A1

Flange Mounting Subplate Mounting


Seal Kits

List
Part. Description
Price
PV-12 $ 108 Seal Kit - To suit PV2V3-30/12
PV-25 $ 138 Seal Kit - To suit PV2..-30/25
PV-40 $ 170 Seal Kit - To suit PV2..-20/40
PV-63 $ 187 Seal Kit - To suit PV2..-20/63

HAND PUMPS 12-25CC, SINGLE/DOUBLE ACTING, 3 & 5 LT TANKS


Standard: Pump Valve Ports 3/8" BSPP

Part Number & Pricing Specifications

Outlet Ports Pressure Weight


Part. List Price CC/Rev Handle Function
BSPP - 3/8" Bar Kg
PRP 12 $ 344 12 Single Acting Single Outlet 300 4.6
PRB 12 $ 344 12 Double Acting Single Outlet 320 4
PRBD 12 $ 354 12 Double Acting Double Outlet 320 4
PRP 25 $ 344 25 Single Acting Single Outlet 160 4.6
PRB 25 $ 344 25 Double Acting Single Outlet 250 4.2
PRBD 25 $354 25 Double Acting Double Outlet 250 4.2

PRP SERIES PRB SERIES PRBD SERIES


OPTIONS - TANK
List
Part. Litres
Price
T3 $ 90 3
T5 $ 125 5

Hydraulics International 44 www.hydraulicsint.com.au


GEAR PUMP ROTATION RH TO LH ROTATION CHANGE
STEP 1 STEP 2

HAND PUMPS
STEP 3 STEP 4

STEP 5 STEP 6

STEP 7 STEP 8

NOTE - BASIC GUIDE ONLY, PLEASE CONTACT OFFICE


FOR MORE INFORMATION

Hydraulics International 45 www.hydraulicsint.com.au


NOTES

Hydraulics International 46 www.hydraulicsint.com.au


MOBILE VALVES

CONTENTS
MONOBLOCK VALVES
LOG SPLITTER VALVES
DIVERTER VALVES
SELECTOR VALVES

Hydraulics International 47 www.hydraulicsint.com.au


P35 SERIES MONOBLOCK 35LT

Ordering Code System

SPOOL TYPE SPOOL OPERATION


1P35R1 GKZ1
OPTION 1 OPTION 2

OPTION 1 OPTION 2
SPOOL TYPE SPOOL OPERATION

Code Description List Price Code Description List Price

Cylinder 1 Spring Return - 3 Position -


A -
3 Position
Motor
D - 8 Detent - 3 Position $ 32
3 Position
Single Acting
B -
2 Position

Standard: Spool Cylinder, Spring Return, Ports 3/8" BSPP

Part Number & Pricing Specifications

Flow Pressure - Max Cont


List Mounting Weight
Part. Handles Max P T A&B
Price 2 Holes mm Kg
LPM Bar Bar Bar

1P35R1A1GKZ1 $ 155 1 35 250 50 300 9 1.9

55 46
38

P P T
90

78

A
1
51

0
2

86

Hydraulics International 48 www.hydraulicsint.com.au


P40 SERIES MONOBLOCK 45LT

Ordering Code System

HANDLES SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS


P40R1 GKZ1
1 -7 Avail OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 OPTION 2 OPTION 3 OPTION 4


SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS
List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price

MOBILE VALVES
Cylinder 1 Spring Return - 3 Position - Micro Carry
A - E $ 48 C2 $ 13
3 Position Switch Kit Beyond
2 Spring Out / Detent In - 3 Position $ 44
Motor Pneumatic Closed
D - 4 Spring Return (Out) - 2 Position $ 13 P $ 128 C $9
3 Position Kit Centre
Single Acting 5 Spring Return (In) - 2 Position $ 13 Joy Stick - 2
B - JS $ 102
2 Position Spools
8 Detent - 3 Position $ 32
Float Spool -
L $ 114 9 Detent (Out) - 2 Position $ 30
4 Position
10 Detent (In) - 2 Position $ 30

Standard: Spool Cylinder, Spring Return, Ports P, T, N, 1/2" BSPP A, B, 3/8" BSPP

Part Number & Pricing Specifications

Pressure - Max Cont Mounting Dimensions for Drawing


List Flow Max Weight
Part. Handles P T A&B 2 Hole
Price LPM Kg C D
Bar Bar Bar mm
1P40R1A1GKZ1 $ 192 1 45 250 50 300 9 2.5 85 60
2P40R1A1GKZ1 $ 306 2 45 250 50 300 9 4.4 129 97
3P40R1A1GKZ1 $ 436 3 45 250 50 300 9 5.8 164 132
4P40R1A1GKZ1 $ 552 4 45 250 50 300 9 7 199 167
5P40R1A1GKZ1 $ 687 5 45 250 50 300 9 8.4 234 202
6P40R1A1GKZ1 $ 830 6 45 250 50 300 9 9.9 269 237
7P40R1A1GKZ1 $ 963 7 45 250 50 300 9 11.5 304 272

60 C
35
40

N
P1 P2 P1
B2 B1
100

80
194

T1 T2

A2 A1
1
0
2

55

60 D

Hydraulics International 49 www.hydraulicsint.com.au


P80 SERIES MONOBLOCK 90LT

Ordering Code System

HANDLES SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS


P80R1 GKZ1
1 -6 Avail OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 OPTION 2 OPTION 3 OPTION 4


SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS
List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price
Cylinder 1 Spring Return - 3 Position - Micro Carry
A - E $ 52 C2 $ 22
3 Position Switch Kit Beyond
2 Spring Out / Detent In - 3 Position $ 48
Motor Pneumatic Closed
D - P $ 132 C $ 15
3 Position 4 Spring Return (Out) - 2 Position $ 15 Kit Centre
Single Acting 5 Spring Return (In) - 2 Position $ 15 Joy Stick -
B - JS $ 102
2 Position 2 Spools
8 Detent - 3 Position $ 36
Float Spool
L $114
4 Position 9 Detent (Out) - 2 Position $ 30

10 Detent (In) - 2 Position $ 30

Standard: Spool Cylinder, Spring Return, Ports P, A, B, 1/2" BSPP T, N, 3/4" BSPP

Part Number & Pricing Specifications

Flow Pressure - Max Cont Mounting Dimensions for Drawing


List Weight
Part. Handles Max P T A&B 3 Hole
Price Kg A B C D
LPM Bar Bar Bar mm
1P80R1A1GKZ1 $ 301 1 90 250 50 300 9 3.8 65 79 107 65
2P80R1A1GKZ1 $ 461 2 90 250 50 300 9 7.3 80 94 160 103
3P80R1A1GKZ1 $ 621 3 90 250 50 300 9 9.5 80 94 198 141
4P80R1A1GKZ1 $ 813 4 90 250 50 300 9 11.6 80 94 242 179
5P80R1A1GKZ1 $ 1014 5 90 250 50 300 9 14.2 80 94 280 217
6P80R1A1GKZ1 $ 1160 6 90 250 50 300 9 16.4 80 94 318 255

A D
40

P1 P2 P1
234

105

B2 B1
T1 T2

A2 A1
1

53
0

55
2

B C

Hydraulics International 50 www.hydraulicsint.com.au


P120 SERIES MONOBLOCK 150LT

Ordering Code System

HANDLES SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS


P120R1 GKZ1
1 - 4 Avail OPTION 1 OPTION 2 OPTION 3 OPTION 4

OPTION 1 OPTION 2 OPTION 3 OPTION 4


SPOOL TYPE SPOOL OPERATION VALVE CONTROL PLUGS
List List List List
Code Description Code Description Code Description Code Description
Price Price Price Price

MOBILE VALVES
Cylinder 1 Spring Return - 3 Position - Micro Carry
A - E $ 85 C2 $ 25
3 Position Switch Kit Beyond
4 Spring Return (Out) - 2 Position $ 18
Motor Pneumatic Closed
D - 5 Spring Return (In) - 2 Position $ 18 P $ 140 C $ 21
3 Position Kit Centre
Single Acting 8 Detent - 3 Position $ 45
B -
2 Position
9 Detent (Out) - 2 Position $ 38

10 Detent (In) - 2 Position $ 38

Standard: Spool Cylinder, Spring Return, Ports P, T, A, B, N, 1" BSPP

Part Number & Pricing Specifications

Pressure - Max Cont Mounting Dimensions for Drawing


List Flow Max Weight
Part. Handles P T A&B 3 Hole
Price LPM Kg C D
Bar Bar Bar mm
1P120R1A1GKZ1 $ 470 1 150 250 50 300 10 13.5 160 129
2P120R1A1GKZ1 $ 640 2 150 250 50 300 10 19.2 213 182
3P120R1A1GKZ1 $ 850 3 150 250 50 300 10 24.9 266 235
4P120R1A1GKZ1 $ 1060 4 150 250 50 300 10 30.6 319 288

92 C

D
65

B1

T1 T2 T1

P1 P2 A1
182

152

N N
1

77
0

75
2

110

Hydraulics International 51 www.hydraulicsint.com.au


LOG SPLITTER VALVES P81 SERIES, AUTO KICK OUT

Part Number & Pricing Specifications

Ports Pressure - Max Cont Mounting


Flow Weight
Part. List Price P&T A&B P T A&B 3 Hole
LPM Kg
BSPP BSPP Bar Bar Bar mm
P81A2G $ 234 3/4" 1/2" 80 250 50 300 9 4.8

Side & Top Views - P81 Series Scematic

SELECTOR VALVES SV SERIES, MANUAL OPERATED

Part Number & Pricing Specifications

Pressure Mounting
Ports Flow
Part. List Price Max Cont 2 Hole Weight Kg
BSPP LPM
Bar mm
SV80AG12K $ 128 1/2" 75 210 9 1.4

SV120AG34K $ 198 3/4" 113 210 9 2.4

Top & Side Views - SV Series Scematic - Crossover

DIVERTER VALVES 3WAY & 4WAY, HANDLE OPERATED

Part Number & Pricing Specifications

Pressure Mounting
Ports Flow
Part. List Price Function Max Cont 2 Hole Weight Kg
BSPP LPM
Bar mm
358-30-12 $ 114 1/2" 3 Way - Closed Centre 90 250 10.5 1.5

358-31-12 $ 114 1/2" 3 Way - Open Centre 90 250 10.5 1.5

303-40-12 $ 119 1/2" 4 Way - Closed Centre 60 320 10.5 2.1

303-43-12 $ 119 1/2" 4 Way - Open Centre 60 320 10.5 2.1

Side & Top Views - 3 Way, 358 Series Side & Top Views - 4 Way, 303 Series
150

70
85 30

53 43

Hydraulics International 52 www.hydraulicsint.com.au


SELECTOR VALVES 6 PORT SELECTOR, STACKABLE, 50LT
Standard: Handle or Solenoid Operated, Ports 3/8" BSPP

Part Number & Pricing Specifications

Pressure
No. Handle / Voltage Flow Mounting(Top) Weight
Part. List Price With Drain Without Drain
Valves Solenoid DC LPM 2 Holes mm Kg
Bar Bar
1DVS6-6/2-L-12DC-G38-02 $ 260 1 Solenoid 12 50 315 210 6.5 2.7
1DVS6-6/2-L-24DC-G38-02 $ 260 1 Solenoid 24 50 315 210 6.5 2.7
DVH-6/2-A11-GKZ1R $ 260 1 Handle - 50 315 210 6.5 2.6

SELECTOR VALVES
Side & Top View - Solenoid Operated Side & Top View - Handle Operated Single Valve - Schematic
61

61

173.4 156.2
Dual Valve - Schematic

73
64

64

SELECTOR VALVES 6 PORT SELECTOR, STACKABLE, 90LT


Standard: Solenoid Operated, Ports 1/2" BSPP

Part Number & Pricing Specifications

Mounting(Top)
No. Voltage Flow Pressure Weight
Part. List Price 2 Hole
Valves DC LPM Bar Kg
mm
1SVV6/2-12DC-G-12 $ 348 1 12 90 250 8.5 4.4
1SVV6/2-24DC-G-12 $ 348 1 24 90 250 8.5 4.4

Side & Top Views - Solenoid Operated Single Valve - Schematic

C2 B1 B2
C1
69.5

69 A1 A2
235.2

Hydraulics International 53 www.hydraulicsint.com.au


NOTES

Hydraulics International 54 www.hydraulicsint.com.au


CETOP VALVES

CONTENTS
SOLENOID OPERATED VALVES
HANDLE, PNEU & HYD OPERATED VALVES
MODULAR VALVES
MANIFOLDS & SUBPLATES
QUICK HITCH PICTURES

Hydraulics International 55 www.hydraulicsint.com.au


CETOP SOLENOID VALVES DOFLUID
Cetop 3: Flow 80 LPM, Pressure 350 Bar
Front & Side View - 12 / 24 Volt DC End View - DC & AC
Part Number & Pricing Specifications
DFA-02-...-DC...-L-35 Series
Voltage Options List Weight
Schematic
DC12, DC24, AC110, AC240 Price Kg
DFA 02-3C2- Voltage -L-35 $ 195 2
DFA 02-3C4- Voltage -L-35 $ 195 2
DFA 02-3C60- Voltage -L-35 $ 210 2
DFA 02-3C3- Voltage -L-35 $ 195 2
DFA 02-2B2- Voltage -L-35 $ 160 1.5
DFA 02-2B2B- Voltage -L-35 $ 160 1.5 Front & Side View - 110 / 240 Volt AC
DFA 02-2B4B- Voltage -L-35 $ 160 1.5 DFA-02-...-AC...-L-35 Series
DFA 02-2B60BL- Voltage -L-35 $ 170 1.5
DFA 02-2B3B- Voltage -L-35 $ 160 1.5

Parts

List
Part. Description
Price
DC3 - Coil (Voltage) Coil Only $ 52
DC3 - Armiture Armiture Only $ 52
Z4L Electrical Plug with LED $ 15

Cetop 5: Flow 160 LPM, Pressure 350 Bar


Side View - 12 / 24 Volt DC End View - DC & AC
Part Number & Pricing Specifications
DFA-03-...-DC...-L-35 Series
Voltage Opions List Weight
Schematic
DC12, DC24, AC110, AC240 Price Kg
DFA 03-3C2- Voltage -L-35 $ 294 5.1
DFA 03-3C4- Voltage -L-35 $ 294 5.1
DFA 03-3C60- Voltage -L-35 $ 315 5.1
DFA 03-3C3- Voltage -L-35 $ 294 5.1
DFA 03-2B2- Voltage -L-35 $ 240 4
DFA 03-2B2B- Voltage -L-35 $ 240 4
Side View - 110 / 240 Volt AC
DFA 03-2B4B- Voltage -L-35 $ 240 4
DFA-03-...-AC...-L-35 Series
DFA 03-2B60BL- Voltage -L-35 $ 255 4
DFA 03-2B3B- Voltage -L-35 $ 240 4

Parts

List
Part. Description
Price
DC5 - Coil (Voltage) Coil Only $ 68
DC5 - Armiture Armiture Only $ 68
Z4L Electrical Plug with LED $ 15

Hydraulics International 56 www.hydraulicsint.com.au


INTERNATIONAL
CETOP SOLENOID VALVES INTERNATIONAL
Cetop 3: Flow 80 LPM, Pressure 320 Bar
Front & Side View - 12 / 24 Volt DC
Part Number & Pricing Specifications
4WE6...75/DC...NZ4 Series
Voltage Options List Weight
Schematic
G12, G24, AG110, AG240 Price Kg
4WE6E75/ Voltage NZ4 $ 175 2.1
4WE6J75/ Voltage NZ4 $ 175 2.1
4WE6G75/ Voltage NZ4 $ 185 2.1
4WE6H75/ Voltage NZ4 $ 175 2.1
4WE6D75/ Voltage NZ4 $ 135 1.6
4WE6EA75/ Voltage NZ4 $ 135 1.6
4WE6JA75/ Voltage NZ4 $ 135 1.6 Front & Side View - 110 / 240 Volt AC
4WE6GA75/ Voltage NZ4 $ 140 1.6 4WE6...75/AC...NZ4 Series
4WE6HA75/ Voltage NZ4 $ 135 1.6

Parts
List
Part. Description
Price
IC3 - Coil (Voltage) Coil Only $ 52
IC3 - Armiture Armiture Only $ 52

CETOP VALVES
Z4L Electrical Plug with LED $ 15

Cetop 5: Flow 160 LPM, Pressure 320 Bar


Front & Side View - 12 / 24 Volt DC
Part Number & Pricing Specifications
4WE10...23/DC...NZ4 Series
Voltage Options List Weight
Schematic
G12, G24, AG110, AG240 Price Kg
4WE10E23/ Voltage NZ4 $ 265 5.5
4WE10J23/ Voltage NZ4 $ 265 5.5
4WE10G23/ Voltage NZ4 $ 284 5.5
4WE10H23/ Voltage NZ4 $ 265 5.5
4WE10D23/ Voltage NZ4 $ 211 4.5
4WE10EA23/ Voltage NZ4 $ 211 4.5
4WE10JA23/ Voltage NZ4 $ 211 4.5
4WE10GA23/ Voltage NZ4 $ 226 4.5 Front & Side View - 110 / 240 Volt AC
4WE10HA23/ Voltage NZ4 $ 211 4.5
4WE10...23/AC...NZ4 Series

Parts
List
Part. Description
Price
IC5 - Coil (Voltage) Coil Only $ 68
IC5 - Armiture Armiture Only $ 68
Z4L Electrical Plug with LED $ 15

Cetop 7: Flow 300 LPM, Pressure 320 Bar


Front & Side View - Mainstage and Pilot
Part Number & Pricing Specifications
4WE16...53/......NZ4
Voltage Options List Weight
Schematic
G12, G24, AG110, AG240 Price Kg
4WE16E53/ Voltage NZ4 $ 675 9.7
4WE16J53/ Voltage NZ4 $ 675 9.7
4WE16G53/ Voltage NZ4 $ 729 9.7
4WE16H53/ Voltage NZ4 $ 675 9.7
4WE16D53/ Voltage NZ4 $ 639 8.7

Parts
List
Part. Description
Price
C7-P4.5 P Port Check - 4.5 Bar $ 130

Hydraulics International 57 www.hydraulicsint.com.au


INTERNATIONAL
CETOP SOLENOID VALVES INTERNATIONAL
Cetop 8: Flow 450 LPM, Pressure 320 Bar
Front & Side View - Mainstage and Pilot
Part Number & Pricing Specification
4WE22...53/......NZ4
Voltage Options List Weight
Scheme
G12, G24, AG110, AG240 Price Kg
4WE22E53/ Voltage NZ4 $ 909 14.6
4WE22J53/ Voltage NZ4 $ 909 14.6
4WE22G53/ Voltage NZ4 $ 954 14.6
4WE22H53/ Voltage NZ4 $ 909 14.6
4WE22D53/ Voltage NZ4 $ 850 13.2

Parts

List
Part. Description
Price
C8-P4.5 P Port Insert Check - 4.5bar $ 145
Pilot oil feed (plug: M6x8L)
external: plugged
internal: open
Pilot oil drain(plug: M6x8L)
external: plugged
internal: open

SPOOL IDENTIFICATION TABLE







 





 


     
          
   
     







     
     

           
             
           
  

  

  

  

  

  

  

  

  

  

  

  

  

  


 Hydraulics
International
  58 www.hydraulicsint.com.au
  
INTERNATIONAL
CETOP VALVES HANDLE, PNEUMATIC & HYDRAULIC

Handle Operated Valves: Cetop 3, Flow 60 LPM, Pressure 320 Bar


Part Number & Pricing Specifications
List Weight
Spring Return Schematic
Price Kg
4WMM6E51 $ 286 1.6
4WMM6J51 $ 286 1.6
4WMM6G51 $ 286 1.6
4WMM6H51 $ 286 1.6

136
4WMM6D51 $ 286 1.6

46
Part Number & Pricing Specifications
List Weight
Detent Schematic 148.5
Price Kg
4WMM6E51F $ 286 1.6

46
4WMM6J51F $ 286 1.6
4WMM6G51F $ 286 1.6
4WMM6H51F $ 286 1.6
4WMM6D51F $ 286 1.6

CETOP VALVES
Pneumatic Operated Valves: Cetop 3, Flow 60 LPM, Pressure 320 Bar
Part Number & Pricing Specifications
List Weight

1/4 BSPP
Cetop 3 Schematic
50

Price Kg
RH06016F $ 350 1.9
179
RH06046F $ 350 1.9
RH06026F $ 350 1.9
RH06006F $ 350 1.9
46

RH06116F $ 300 1.5

Pneumatic Operated Valves: Cetop 5, Flow 140 LPM, Pressure 320 Bar
Part Number & Pricing Specifications
List Weight
Cetop 5 Schematic
1/4 BSPP

Price Kg
83

RH10016FNM $ 525 4.3


T A P B T
RH10026FNM $ 525 4.3
167

T T
70

A B

Hydraulic Operated Valves: Cetop 3, Flow 60 LPM, Pressure 320 Bar


Part Number & Pricing Specifications
List Weight
1/4 BSPP

Cetop 3 Schematic
50

Price Kg
RH06012F $ 420 2.2 166

RH06042F $ 420 2.2


RH06022F $ 420 2.2
RH06002F $ 420 2.2
46

RH06112F $ 350 1.6

Hydraulics International 59 www.hydraulicsint.com.au


INTERNATIONAL
CETOP MODULAR VALVES SANDWICH DESIGN

Flow Control Valves: Pressure 320 Bar


DROK6M/32AB
Part Number & Pricing Specifications
P

List Weight

45
A B
Part. Size Function Schematic
Price Kg T

140 26
Meter P' A' B' T'

DROK6M/32AB $ 190 Cetop 3 In/Out 0.8


(Universal) P A B T
DROK10M/32AB

Meter P' A' B' T'

DROK10M/32AB $ 240 Cetop 5 In/Out 2.6 T T

70
(Universal) P A B T A B

Relief Valves: Pressure 320 Bar


195 36

Part Number & Pricing Specifications


List Weight
Part. Size Function Schematic
Price Kg
P
P' A' B' T'

45
A B

KP6M/32P $ 160 Cetop 3 P to T 1.1 T

P A B T
215 43
P' A' B' T'

KP6M/32AB $ 260 Cetop 3 A+B to T 1.3 KP10M/...P


P A B T

P' A' B' T' T T

70
KP6M/32AB2 $ 260 Cetop 3 Crossline 1.3 A B

P A B T P

P' A' B' T' 150 50

KP10M/32P $ 190 Cetop 5 P to T 2.9


P A B T

Reducing Valves: Pressure 320 Bar


Part Number & Pricing Specifications
List Weight MPR02-P
Part. Size Function Schematic
Price Kg P

BSPP 1/4”

46
A B
Pressure Gauge
MPR02-P-2-2 $ 160 Cetop 3 70-8 bar 1.2 T

P T B A
149.3 40

Rotate clockwise to increase pressure in port


MPR02-P-2-4 $ 160 Cetop 3 250-70 bar 1.2
P T B A

P/O Check Valves: Pressure 320 Bar


MPC-02-W-50
Part Number & Pricing Specifications
P

List Weight
46

A B
Part. Size Function Schematic
Price Kg T

121 40

MPC-02-W-50 $ 150 Cetop 3 Dual A & B 1.1


P T B A
MPC-03-W-50

MPC-03-W-50 $ 170 Cetop 5 Dual A & B 2 T T


70

P T B A A B

55
Overcentre Valves: Pressure 250 Bar
142

Part Number & Pricing Specifications


List Weight
Part. Size Function Schematic
Price Kg
P' B' A' T'

OWC6M/25A $ 190 Cetop 3 Single A OWC6M25A


0.6 P

A B
45

P B A T
T
P' B' A' T'
214 55
OWC6M/25AB $ 330 Cetop 3 Dual 0.9
P B A T

Hydraulics International 60 www.hydraulicsint.com.au


INTERNATIONAL
CETOP BAR MANIFOLDS
Cetop 3: Steel Manifolds
Parallel Design - Relief Option & Gauge Port Series Design - Relief Option & Gauge Port

Part Number & Pricing Specifications Part Number & Pricing Specifications
Ports - BSPP
Total Dim "A" Ports - BSPP
Total Dim "A"
List No. Weight List No. Weight
Part. Length PCD Part. Length PCD
Price Stations P & T A & B Kg Price Stations P & T A & B Kg
mm mm mm mm
HIC3P2SC $ 130 2 Station 1/2" 3/8" 120 108 4.5 HIC3S2SC $ 160 2 Station 1/2" 3/8" 120 108 4.5
HIC3P3SC $ 180 3 Station 1/2" 3/8" 170 158 6.2 HIC3S3SC $ 220 3 Station 1/2" 3/8" 170 158 6.2
HIC3P4SC $ 230 4 Station 1/2" 3/8" 220 208 8.2 HIC3S4SC $ 280 4 Station 1/2" 3/8" 220 208 8.2

MODULAR VALVES & MANIFOLDS


HIC3P5SC $ 280 5 Station 1/2" 3/8" 270 258 10
HIC3P6SC $ 330 6 Station 1/2" 3/8" 320 308 12
HIC3P7SC $ 382 7 Station 1/2" 3/8" 370 358 14

Cetop 3: Alloy Manifolds


Parallel Design - Relief Option & Gauge Port Series Design - Relief Option & Gauge Port

Part Number & Pricing Specifications Part Number & Pricing Specifications
Ports - BSPP
Total Dim "A" Ports - BSPP
Total Dim "A"
List No. Weight List No. Weight
Part. Length PCD Part. Length PCD
Price Stations P & T A & B Kg Price Stations P & T A & B Kg
mm mm mm mm
HIC3P2AC $ 150 2 Station 1/2" 3/8" 120 108 1.5 HIC3S2AC $ 150 2 Station 1/2" 3/8" 120 108 1.5
HIC3P3AC $ 210 3 Station 1/2" 3/8" 170 158 2.2 HIC3S3AC $ 210 3 Station 1/2" 3/8" 170 158 2.2
HIC3P4AC $ 270 4 Station 1/2" 3/8" 220 208 2.9 HIC3S4AC $ 270 4 Station 1/2" 3/8" 220 208 2.9
HIC3P5AC $ 330 5 Station 1/2" 3/8" 270 258 3.6 A

HIC3P6AC $ 400 6 Station 1/2" 3/8" 320 308 4.3

Manifold Options

Part. Description List Price


R250 Relief Cartridge - Up to 250 bar $ 80
C3BP-P Blanking Plate Parallel - All Ports Blocked $ 35

70
CETOP SUBPLATES
Cetop 3: Steel Subplates
Top & Side Views - G342/01 Top & Side Views - G342/01-SE
Part Number & Pricing Specifications
66.5 77
Part. List Price Description Weight Kg
T
G341/01 $ 60 1/4" BSPP Bottom Entry 0.6
T
G342/01 $ 60 3/8" BSPP Bottom Entry 1.1 A B
50

A B
80

G342/01-SE $ 60 3/8" BSPP Side Entry 0.7 B


P
C03/1-RV1 $ 210 3/8" BSPP Side + Relief, Alloy 1.2 8 P
85 25.5
90 30

Cetop 5: Steel Subplates 108

Top & Side Views - G67/01 Top & Side Views - G67/01-SE
Part Number & Pricing Specifications
79.4 79.4
Part. List Price Description Weight Kg
G67/01 $ 115 1/2" BSPP Bottom Entry 2 P

G67/01-SE $ 115 1/2" BSPP Side Entry 2.1


P P
A B T A B B B
Cetop 7: Steel Subplates
115

115
92

92

T T

Part Number & Pricing Specifications A

Part. List Price Description Weight Kg 102 32 102 37

G172/01 $ 198 3/4" BSPP Bottom Entry 2.8


G174/01 $ 275 1" BSPP Bottm Entry 9

Hydraulics International 61 www.hydraulicsint.com.au


QUICK HITCH KITS
QHD-VOLTAGE-REAR QHD-VOLTAGE-SE

2 Position Quick Hitch 2 Position Quick Hitch


Rear Entry Subplate Side Entry Subplate

QHD-VOLTAGE-TILT-REAR QHD-VOLTAGE-TILT-SE

3 Position Tilt 3 Position Tilt


Rear Entry Subplate Side Entry Subplate

QHD-VOLTAGE-REAR QHD-VOLTAGE-SE
MPR02-P-2-2 MPR02-P-2-2

2 Position Quick Hitch 2 Position Quick Hitch


Pressure Reducing Valve Pressure Reducing Valve
Rear Entry Subplate Side Entry Subplate

Hydraulics International 62 www.hydraulicsint.com.au


INTERNATIONAL

PRESSURE & FLOW


CONTROL VALVES

CONTENTS
FLOW CONTROL VALVES
RELIEF VALVES
P/O CHECK VALVES
CHECK VALVES
HOSE BURST VALVES
OVERCENTRE VALVES
PRESSURE SWITCHES
PRIORITY VALVES
FLOW DIVIDER VALVES

Hydraulics International 63 www.hydraulicsint.com.au


IN-LINE VALVES PRESSURE & FLOW CONTROL

Flow Control Valves - Reverse Flow Check


Part Number & Pricing Specifications
Ports Flow Pressure Weight
Part. List Price
BSPP Max LPM Max Bar Kg
DRV6-1-10 $ 45 1/8" 14 350 0.4
DRV8-1-10 $ 48 1/4" 20 350 0.4
DRV10-1-10 $ 55 3/8" 40 350 0.5
DRV12-1-10 $ 70 1/2" 60 350 0.7
DRV16-1-10 $ 88 3/4" 100 350 1

Needle Valves - Controlled Flow Both Ways


Part Number & Pricing Specifications
Ports Flow Pressure Weight
Part. List Price
BSPP Max LPM Max Bar Kg
DV6-1-10 $ 38 1/8" 14 350 0.4
DV8-1-10 $ 42 1/4" 20 350 0.4
DV10-1-10 $ 52 3/8" 40 350 0.5
DV12-1-10 $ 64 1/2" 60 350 0.7
DV16-1-10 $ 86 3/4" 100 350 1

Relief Valves - Steel


Part Number & Pricing Specifications
Ports Flow # Pressure Weight
Part. List Price Description
BSPP Max LPM Options Bar Kg
DBDs6G13 # $ 182 1/4" Valve 35 100/200/315 1.6
P
DBDs10G13 # $ 230 1/2" Valve 80 100/200/315 3.7
KPP10/32TGB $ 260 3/4" Call Office 160 320 3.7
T T
DBDs20G13 # $ 294 1" Valve 140 100/200/315 6.9
T P P
DBDs6K13 # $ 126 1/4" Cartridge - 100/200/315 0.4
DBDs10K13 # $ 150 1/2" Cartridge - 100/200/315 0.6 (P) (P)

DBDs20K13 # $ 205 1" Cartridge - 100/200/315 0.9

Relief Valves - Alloy


Part Number & Pricing Specifications
Ports Flow Pressure Weight P
Part. List Price
BSPP Max LPM Max Bar Kg
CPL40/38 $ 105 3/8" 40 250 0.3
P
P
T

P/O Check Valves - Steel T

Part Number & Pricing Specifications


Ports Flow Pressure Weight
Part. List Price Description U1 U2
BSPP Max LPM Max Bar Kg
KOHU1/4-S $ 78 1/4" SINGLE 15 320 0.6 P1 P2

KOHU3/8-S $ 80 3/8" SINGLE 30 320 0.6 U1 U2

KOHU1/2-S $ 106 1/2" SINGLE 45 320 1.4


KOHU1/4 $ 98 1/4" DUAL 15 320 0.7 P1 P2 P2

KOHU3/8 $ 100 3/8" DUAL 30 320 0.7


KOHU1/2 $ 120 1/2" DUAL 45 320 1.7

Hydraulics International 64 www.hydraulicsint.com.au


IN-LINE VALVES PRESSURE & FLOW CONTROL
Check Valves
Part Number & Pricing Specifications
List Ports Flow Cracking Pressure Weight
Part.
Price BSPP Max LPM Bar Max Bar Kg
SO6A1 $ 22 1/4" 25 0.5 350 0.1
SO6A3 $ 22 1/4" 25 3 350 0.1
SO8A1 $ 26 3/8" 40 0.5 350 0.2
SO8A3 $ 26 3/8" 40 3 350 0.2
SO10A1 $ 32 1/2" 60 0.5 350 0.4
SO10A3 $ 32 1/2" 60 3 350 0.4
SO15A1 $ 40 3/4" 100 0.5 350 0.5
SO15A3 $ 40 3/4" 100 3 350 0.5
SO20A1 $ 62 1" 150 0.5 350 0.7
SO20A3 $ 62 1" 150 3 350 0.7

Hose Burst Valves


Part Number & Pricing Specifications
List Ports Flow Pressure Weight
Part. Descrption
Price BSPP Max LPM Max Bar Kg
A B

HC870-1/4-TMB $ 35 1/4" Female Female 25 350 0.1


HC870-3/8-TMB $ 35 3/8" Female Female 50 350 0.2
HC870-1/2-TMB $ 45 1/2" Female Female 80 350 0.2
HC870-3/4-TMB $ 50 3/4" Female Female 150 350 0.5

IN-LINE VALVES
Overcentre Valves - Alloy
Part Number & Pricing Specifications
V1 V2
List Ports Flow Pressure Weight V1 V2
Part. Descrption
Price BSPP Max LPM Max Bar Kg
OWC-SE/L38 $ 145 3/8" Single 40 250 0.6
C1 C2 C1 C2
OWC-SE/L12 $ 168 1/2" Single 60 250 0.8
OWC-SE/L34 $ 238 3/4" Single 120 250 1.3
OWC-DE/L38 $ 225 3/8" Dual 40 250 0.8
OWC-DE/L12 $ 245 1/2" Dual 60 250 1.1
OWC-DE/L34 $ 348 3/4" Dual 120 250 2.6

Pressure Switches
Part Number & Pricing Specifications
List Ports Pressure Weight 2
3
Part.
Price BSPP Range Bar Kg
DNA-100K-22B $ 180 1/4" 15-100 1.1 1
DNA-250K-22B $ 180 1/4" 40-250 1.1
DNA-360K-22B $ 180 1/4" 50-360 1.1

Priority - 3 Way Handle Operated


Part Number & Pricing Specifications
R

List Ports Priority Pressure E R R


Part. Weight Kg
Price BSPP Max LPM Max Bar E
T
RD10/3T $ 340 3/8" 30 210 1.2
T

Priority - 3 way Knob Operated


Part Number & Pricing Specifications P

List Ports Flow Priority Pressure Weight P A


Part.
Price BSPP Max LPM Max LPM Max Bar Kg T

RD10/3T
VRFC3/V/VS12 360
$ 340 1/2" 90 50 250 2.3
T
VRFC3/V/VS34 $ 460 3/4" 150 90 250 4.1 A

Flow Divider
Part Number & Pricing Specifications C1 C2 C1 C2

List Ports Ports Outlet Flow Pressure Weight


Part.
Price BSPP BSPP Max LPM Max Bar Kg V
FDC10-12-40 $ 215 1/2" 3/8" 40 210 0.9 V

Hydraulics International 65 www.hydraulicsint.com.au


BOLTS
CETOP BOLT KITS

Part Number & Pricing Specifications

Part. List Price Qty Description

M5 # 45 $8 4 CETOP 3 [ DOFLUID AND INTERNATIONAL ]


M5 # 75 $ 12 4 CETOP 3 + FLOW CONTROL
M5 # 85 $ 12 4 CETOP 3 + RELIEF VALVE
M5 # 85 $ 12 4 CETOP 3 + P/O CHECK
M5 # 85 $ 12 4 CETOP 3 + PRESSURE REDUCING VALVE
M5 # 100 $ 20 4 CETOP 3 + P/O OVERCENTRE VALVE
M6 # 40 $9 4 CETOP 5 [ INTERNATIONAL ]
M6 # 80 $ 15 4 CETOP 5 + FLOW CONTROL
M6 # 90 $ 15 4 CETOP 5 + RELIEF VALVE
M6 # 90 $ 15 4 CETOP 5 + P/O CHECK
M6 # 35 $9 4 CETOP 5 [ DOFLUID ]
M6 # 75 $ 15 4 CETOP 5 + FLOW CONTROL
M6 # 85 $ 15 4 CETOP 5 + RELIEF VALVE
M6 # 85 $ 15 4 CETOP 5 + P/O CHECK
M6 # 60 + M10 # 60 $ 19 2+4 CETOP 7 [ INTERNATIONAL ]

M + S BOLT KITS

MOTORS

Part Number & Pricing Specifications

Part. List Price Qty Description

M8 # 35 $ 14 4 KPWR - SWITCH VALVE


M10 # 40 $ 16 2&4 KPWS & KPWT - SWITCH VALVE
M12 # 45 $ 16 4 KPWV - SWITCH VALVE
M8 # 50 $ 14 4 KPBR - OVERCENTRE VALVE
M10 # 50 $ 16 2&4 KPBS & KPBT - OVERCENTRE VALVE
M12 # 70 $ 18 4 KPBV - OVERCENTRE VALVE
M8 # 40 $ 14 4 KPDR ( KPER ) - RELIEF VALVE
M10 # 35 $ 14 2 KPDS - RELIEF VALVE
M10 # 70 $ 16 4 KPDT - RELIEF VALVE
M12 # 75 $ 18 4 KPDV - RELIEF VALVE

BRAKES

Part Number & Pricing Specifications

Part. List Price Qty Description

M12 # 30 $ 14 2-4 LB 288 - MOTOR INPUT


M10 # 35 $ 14 4 LB 289 / 290 - MOTOT INPUT
M14 # 8.8 $ 18 4 LBS 314 / 315 - MOTOR INPUT

STEERING UNITS

Part Number & Pricing Specifications

Part. List Price Qty Description

M10 # 1 # 40 $ 34 2 HKU - DIRECT MOUNTED BLOCK [ 1mm PITCH ]

Hydraulics International 66 www.hydraulicsint.com.au


NOTES

Hydraulics International 67 www.hydraulicsint.com.au


TERMS AND CONDITIONS
Goods are sold by the vendor to the purchaser subject to the following terms and conditions:

1. AVAILABILITY

Any statement or agreement by the vendor is contingent on its ability to obtain, supply or deliver the goods.

2. PRICE

All prices in the price list are in Australian dollars, “plus sales tax” if applicable and subject to change without notice
Cost of cartage and insurance to the purchasers required destination will be to the purchasers account.
Insurance, haulage, freight and other charges incurred once the goods have left the vendors works are not included in
the sales price.

3. TERMS OF PAYMENT & RETENTION OF TITLE

Payment shall be made by the purchaser paying to the vendor the amount shown on the invoice within 30 days of the
dispatch from the vendors works. We reserve the right to suspend accounts, and take orders on a COD basis, if the ac-
counts are not finalized within a standard period of time. Property of the goods supplied by Hydraulics International P/L
does not pass to the purchaser until the payment is received in full.

4. DELIVERY

The vendor shall not be liable in respect of any delay in delivery arising from any industrial dispute or causes outside his
control. Liability for the proven Loss due to delay arising from causes within the vendor control shall not extend to conse-
quential loss and shall be limited to the amount of the contract Price for the delayed goods.

5. RETURNS

Goods will not be accepted for credit without prior written permission and no claims recognized after 14 days from
receipt of goods.
A 15% credit return fee will be applied to all goods returned for credit. Goods purchased to special order are non-return-
able. Goods returned for credit are subject to inspection before credit is given. Goods returned must be unused and in
original packing.

6. WARRANTY

A. The vendor will make good by repair or replacement, at its discretion defects in any goods which may appear
within a period of 9 months after delivery, Provided that the goods have been properly used and the defect
arose solely from faulty design, materials or workmanship. The vendor reserves the right to inspect the prod-
uct at the purchaser’s location or require to be returned to the vendor’s works for inspection at the purchaser’s
expense.

B. The vendors liability under this clause shall be in lieu of any warranty or conditions implied or imposed by law
as to the quality or fitness for any Particular purpose of the goods and save as provided in part [a] hereof the
vendor will not be under any obligation whether contract tort or otherwise in Respect of defects in the goods
delivered or for any injury, damage or loss resulting from such defects or from Work done in connection there-
with and Without derogating from the generality of the foregoing, the vendor shall not be liable for any damage
for delay in delivery, breakdown or diminished Performance of the goods or any form of consequential damage
whatsoever. Warranty void if label of the goods is removed or if the goods is tampered with internally or in any
way whatsoever.

Hydraulics International 68 www.hydraulicsint.com.au


Unit 5, 137-145 Rooks Road, Vermont, Victoria, 3133
ABN 37 063 434 266

61+3+98741155 info@hydraulicsint.com.au

61+3+98741188 www.hydraulicsint.com.au

You might also like