Professional Documents
Culture Documents
PERANCANGAN KURSUS
COURSE OUTLINE
The course helps student in preparing specifications using the standard forms of specification as a basis. The
preparation of a clearly understood specification for construction works requires establishing the level of detail
required and identifying all the inherent contractual obligations.
SINOPSIS (SYNOPSIS):
The course helps student in preparing specifications using the standard forms of specification as a basis. The
preparation of a clearly understood specification for construction works requires establishing the level of detail
required and identifying all the inherent contractual obligations. The capacity to develop specifications, that
may range from outline to detailed specifications and which conform to National Specification System of
Australia (NATSPEC) or other industry standards, is required. The specifications may stipulate materials,
project timelines and quality of work by contributing to quality planning, applying quality policies and
procedures and contributing to continuous improvement within projects. In order to achieve the outcomes for
this course, knowledge of relevant industry legislation and standards, and the ability to research information
and communicate well with clients are required.
15 STUDY WEEK
16 FINAL EXAM
17 FINAL EXAM
AMALI (PRACTICAL):
1. Project Specification
2. Quality Planning
3. Continuous Improvement Process\
PENILAIAN (ASSESSMENT):
TEST
PROJECT
GUIDED
PRESENTATION
QUIZ
CONTEXT
CLO1
CLO2
CLO3
*(1) *(1) *(2) *(1)
10% 20% 50% 20%
1.1 Determine specification requirements
√ √
1.2 Assess the nature and scope of the
√ √
work
1.3 Prepare the specification document √ √
1.4 Monitor steel structure work
√ √
contribute to quality planning
1.5 Monitor timber structure work
√ √
apply quality policies and procedures
1.6 Contribute to continuous
√ √
improvement process
Remark:
1. Suggested time for
Test (Theory) : 30 – 50 minutes
Test (Practical) : 60 – 90 minuts
Individual assignment: 1 week
Project : 1week
2. 40 Notional hours is equivalent to 1 credit.
RUJUKAN (REFERENCES):
1. Ismail Osman Hakim. Undang–Undang Bangunan Untuk Pembangunan Perumahan. Universiti Tun
Hussein Onn Malaysia.
2. Misnan M Saidin, M Yusof Zakaria, Mohamed A,Hakim & Dalib A Rahman. Pengurusan Keselamatan
Projek Pembinaan. Universiti Teknologi Malaysia.
3. Misnan M Saidin, Mohamed A,Hakim &, Abdullah Mat Naim. Pengurusan Projek Pembinaan. Universiti
Teknologi Malaysia.
4. Salleh Nurul Azita & Hussin Abd Aziz. Penggunaan Alat Keselamatan di Tapak Bina. Dewan Bahasa
Pustaka.
5. International Law Book Services Wisma ILBS, Uniform Building By Laws 1984 [G.N.5178/85](2013).
International Law Book Services Wisma ILBS.
6. Hussin A Aziz (2008). Aspek Undang-Undang Dalam Pengurusan Projek Pembinaan. Universiti Sains
Malaysia.
7. Ministry of Education Malaysia
KEHADIRAN/PERATURAN SEMASA KULIAH (LECTURE ATTENDANCE/REGULATION):
1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus.
Students must attend lectures not less than 80% of the contact hours for every course.
2. Pelajar yang tidak memenuhi perkara (1) di atas tidak dibenarkan menghadiri kuliah dan menduduki
sebarang bentuk penilaian selanjutnya. Markah sifar (0) akan diberikan kepada pelajar yang gagal
memenuhi perkara (1).
Students who do not fulfill (1) will not be allowed to attend further lectures and sit for any further
examination. Zero mark (0) will be given to students who fail to comply with (1).
3. Pelajar perlu mengikut dan patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin
diri masing-masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students must obey all rules and regulations of the university and must discipline themselves in order
to avoid any disciplinary actions against them.
4. Pelajar perlu mematuhi peraturan keselamatan semasa proses pembelajaran dan pengajaran.
Student must obey safety regulations during learning and teaching process.