Professional Documents
Culture Documents
ANSYS Multiphysics
*------------------------------------------------------------------*
| |
| W E L C O M E T O T H E A N S Y S (R) P R O G R A M |
| |
*------------------------------------------------------------------*
***************************************************************
* ANSYS 15.0 LEGAL NOTICES *
***************************************************************
* *
* Copyright 2013 SAS IP, Inc. All rights reserved. *
* Unauthorized use, distribution or duplication is *
* prohibited. *
* *
* Ansys is a registered trademark of ANSYS, Inc. or its *
* subsidiaries in the United States or other countries. *
* See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
* documentation CD or online help for the complete Legal *
* Notice. *
* *
***************************************************************
* *
* THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION *
* INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY *
* PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. *
* The software products and documentation are furnished by *
* ANSYS, Inc. or its subsidiaries under a software license *
* agreement that contains provisions concerning *
* non-disclosure, copying, length and nature of use, *
* compliance with exporting laws, warranties, disclaimers, *
* limitations of liability, and remedies, and other *
* provisions. The software products and documentation may be *
* used, disclosed, transferred, or copied only in accordance *
* with the terms and conditions of that software license *
* agreement. *
* *
* ANSYS, Inc. is a UL registered *
* ISO 9001:2008 company. *
* *
***************************************************************
* *
* This product is subject to U.S. laws governing export and *
* re-export. *
* *
* For U.S. Government users, except as specifically granted *
* by the ANSYS, Inc. software license agreement, the use, *
* duplication, or disclosure by the United States Government *
* is subject to restrictions stated in the ANSYS, Inc. *
* software license agreement and FAR 12.212 (for non-DOD *
* licenses). *
* *
***************************************************************
Point Releases and Patches installed:
TITLE=
01-15-16 MM_Model1_Approach A--Transient (A5)
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI710X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI710Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI710Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI712X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI712Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI712Z
SELECT FOR ITEM=TYPE COMPONENT=
IN RANGE 71 TO 71 STEP 1
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3251X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3251Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3251Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3520X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3520Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3520Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3522X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3522Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3522Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3524X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3524Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3524Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3526X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3526Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3526Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3530X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3530Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI3530Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4273X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4273Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4273Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4274X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4274Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4274Z
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 1 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4275X
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 2 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4275Y
SPECIFIED SURFACE LOAD PRES FOR ALL SELECTED ELEMENTS LKEY = 3 KVAL = 1
SET ACCORDING TO TABLE PARAMETER = _LOADVARI4275Z
USE INITIAL TIME STEP SIZE OF 0.1000000E-02 FOR ALL DEGREES OF FREEDOM
FOR AUTOMATIC TIME STEPPING:
USE 0.1000000E-03 AS THE MINIMUM TIME STEP SIZE
USE 0.1000000E-02 AS THE MAXIMUM TIME STEP SIZE
TIME= 0.10000E-01
INCLUDE TRANSIENT EFFECTS FOR ALL DEGREES OF FREEDOM THIS LOAD STEP
The number of files/iterations to be saved for nonlinear diagnostics has been set
to 4
*ENDIF
S O L U T I O N O P T I O N S
L O A D S T E P O P T I O N S
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 65
Max. Penetration of 0 has been detected between contact element 65856
and target element 73335.
For total 416 contact elements, there are 27 elements are in contact.
There are 27 elements are in sticking.
Contacting area 1491.53887.
Max. Pinball distance 9.49154673.
One of the contact searching regions contains at least 12 target
elements.
Max. Pressure/force 1.275709656E-16.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 2.725832334E-03.
Min. Tangential stiffness 2.725832334E-03.
*************************************************
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 66
Max. Penetration of 0 has been detected between contact element 68094
and target element 65472.
For total 5320 contact elements, there are 2 elements are in contact.
There are 2 elements are in sticking.
Contacting area 73.6084358.
Max. Pinball distance 13.5301278.
One of the contact searching regions contains at least 42 target
elements.
Max. Pressure/force 2.638838668E-16.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 1.878464749E-03.
Min. Tangential stiffness 1.878464749E-03.
*************************************************
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 67
Max. Penetration of -2.775732181E-13 has been detected between contact
element 77467 and target element 87423.
For total 484 contact elements, there are 33 elements are in contact.
There are 33 elements are in sticking.
Contacting area 3879.86478.
Max. Pinball distance 9.48269038.
One of the contact searching regions contains at least 21 target
elements.
Max. Pressure/force 3.758315099E-15.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 2.151687329E-03.
Min. Tangential stiffness 2.151687329E-03.
*************************************************
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 68
Max. Penetration of -4.163580082E-13 has been detected between contact
element 83102 and target element 76971.
For total 5320 contact elements, there are 138 elements are in contact.
There are 138 elements are in sticking.
Contacting area 12844.9748.
Max. Pinball distance 13.5301278.
One of the contact searching regions contains at least 30 target
elements.
Max. Pressure/force 5.637448019E-15.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 1.878464749E-03.
Min. Tangential stiffness 1.878464749E-03.
*************************************************
TYPE MASS
1 0.266708E-05
2 0.207667E-02
3 0.323721E-05
4 0.415543E-02
5 0.187544E-01
6 0.193196E-03
7 0.193196E-03
8 0.193196E-03
9 0.193196E-03
10 0.193196E-03
11 0.193196E-03
12 0.965978E-04
13 0.193196E-03
14 0.193196E-03
15 0.193196E-03
16 0.193196E-03
17 0.193196E-03
18 0.193196E-03
19 0.193196E-03
20 0.193196E-03
21 0.193196E-03
22 0.193196E-03
23 0.193196E-03
24 0.193196E-03
25 0.193196E-03
26 0.193196E-03
27 0.193196E-03
28 0.193196E-03
29 0.193196E-03
30 0.193196E-03
31 0.193196E-03
32 0.193196E-03
33 0.193196E-03
34 0.193196E-03
35 0.193196E-03
36 0.193196E-03
37 0.193196E-03
38 0.193196E-03
39 0.193196E-03
40 0.193196E-03
41 0.193196E-03
42 0.193196E-03
43 0.193196E-03
44 0.193196E-03
45 0.193196E-03
46 0.193196E-03
47 0.193196E-03
48 0.193196E-03
49 0.193196E-03
50 0.193196E-03
51 0.193196E-03
52 0.193196E-03
53 0.193196E-03
54 0.193196E-03
55 0.193196E-03
56 0.193196E-03
57 0.193196E-03
58 0.193196E-03
59 0.193196E-03
60 0.193196E-03
61 0.193196E-03
62 0.193196E-03
63 0.193196E-03
64 0.193196E-03
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 65
Max. Penetration of -7.65044679 has been detected between contact
element 65897 and target element 72734.
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 66
Max. Penetration of -11.544093 has been detected between contact
element 67414 and target element 65481.
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 67
Max. Penetration of -3.0177417 has been detected between contact
element 77487 and target element 85702.
For total 484 contact elements, there are 101 elements are in contact.
There are 60 elements are in sticking.
Contacting area 12910.4707.
175 contact points have too much penetration (do not meet
compatibility condition).
Contact element 77445 has the highest number of status changes (total
2) during this substep.
Contact element 77442 has Max. Elastic slip distance of 15.2172161.
Max. Total sliding distance 19.3625038.
Max. Pinball distance 9.48269038.
One of the contact searching regions contains at least 15 target
elements.
Max. Pressure/force 0.874148124.
Max. Friction stress/force 3.362920318E-02.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 2.151687329E-03.
Min. Tangential stiffness 2.151687329E-03.
*************************************************
*************************************************
SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET 68
Max. Penetration of -3.67189027 has been detected between contact
element 80342 and target element 77003.
For total 5320 contact elements, there are 111 elements are in contact.
There are 72 elements are in sticking.
Contacting area 13072.0474.
173 contact points have too much penetration (do not meet
compatibility condition).
Contact element 80182 has the highest number of status changes (total
2) during this substep.
Contact element 80462 has Max. Elastic slip distance of 15.1408398.
Max. Total sliding distance 19.1233451.
Max. Pinball distance 13.5301278.
One of the contact searching regions contains at least 22 target
elements.
Max. Pressure/force 0.846837555.
Max. Friction stress/force 3.104691868E-02.
Max. Normal stiffness 1.353990534E-02.
Min. Normal stiffness 1.353990534E-02.
Max. Tangential stiffness 1.878464749E-03.
Min. Tangential stiffness 1.878464749E-03.
*************************************************
R E S T A R T I N F O R M A T I O N
+--------------------- A N S Y S S T A T I S T I C S ------------------------+
+------------------ E N D A N S Y S S T A T I S T I C S -------------------+
*---------------------------------------------------------------------------*
| |
| ANSYS RUN COMPLETED |
| |
|---------------------------------------------------------------------------|
| |
| Release 15.0 UP20131014 WINDOWS x64 |
| |
|---------------------------------------------------------------------------|
| |
| Database Requested(-db) 512 MB Scratch Memory Requested 512 MB |
| Maximum Database Used 224 MB Maximum Scratch Memory Used 7092 MB |
| |
|---------------------------------------------------------------------------|
| |
| CP Time (sec) = 18025.104 Time = 19:29:25 |
| Elapsed Time (sec) = 14508.000 Date = 01/15/2016 |
| |
*---------------------------------------------------------------------------*