Professional Documents
Culture Documents
3 m
rolls across the beam shown in the figure. Determine the following:
23. The maximum positive moment that can be developed in the beam.
A. 524.98 kN-m C. 498.78 kN-m
B. 384.33 kN-m D. 452.12 kN-m
24. The maximum negative moment that can be developed in the beam.
A. 58.8 kN-m C. 235.8 kN-m
B. 204.4 kN-m D. 263.2 kN-m
25. The maximum negative shear that can be developed in the beam.
A. 105.87 kN
B. 94.37 kN
C. 76.35 kN
D. 82.84 kN
Situation 8 - The beam AB in the figure supports the load of w = 36 kN/m. The beam is fixed at B and
is fixed at B and simply supported at. Length of beam AB is L = 8 m and height of column AC
is H = 6 m
26. Determine the moment at B
A. -384 kN-m C. -164.57 kN-m
B. -288 kN-m D. -460.8 kN-m
27. Determine the location of the point of maximum moment from point A.
A. 3 m C. 2.67 m
B. 3.43 m D. 2.4 m
Situation 9 - A 3 - m - high cantilever retaining wall is acted on by an active force that varies
uniformly from 3 kN/m at the top to 54 kN/m at the base. Assume that the flexural rigidity of
the wall is constant. See figure above.
30. If the wall is simply supported at the top, compute the maximum moment in the wall
.
A. 33.975 kN-m C. 31.125 kN-m
B. 40.125 kN-m D. 29.625 kN-m
31. If the wall is simply supported at the top, compute the maximum shear in the wall.
A. 65.375 kN C. 68.875 kN
B. 65.875 kN D. 66.825 kN
Situation 10 - The truss shown is made from Guijo. The truss supports a vertical load P = 20 kN at C.
Given the following allowable stresses for the grade of the wood:
Compression parallel to the grain = 13.2 MPa
Compression perpendicular to grain = 4.3 MPa
Shear parallel to grain = 2.32 MPa