Professional Documents
Culture Documents
AGF - VA - 23
Sample gas streams must be conditioned to provide § Bühler Unique QC mounting block
particulate and moisture-free gas to the analyzer.
§ Easy filter change without tools
The AGF-VA-23 with the Bühler Unique QC mounting block
provides fine filtration and easy replacement of the filter § Low dead volume for reduced
media without the use of tools. This means the filter media
can be changed in a matter of seconds. response time
The QC block rotates 180° making the mounting of the filter § Variable attachment configurations
independent from the flow direction chosen. This versatile
mounting feature makes installation problem-free. § Optional condensate drain
The filter head has an auxiliary port that can be used either § Filter head with auxiliary port for
as a bypass or for optional moisture detector installation. bypass or moisture detector
A choice of filter media is available to meet any specific
application need. The filter and housing provide a small dead
volume resulting in minimal loss of response time.
1.38” 1.97”
0.28”
Bypass
0.79”
Distance
block
0.91”
1.38”
G1/4*
IN OUT
1.97”
*NPT-thread upon request
3.31”
Bypass
5.83”
ø1.57”
approx. 0.16”
A000024D
G3/8 Drain
The equipment corresponds to the essential requirements of the European Directive 94/9/EC. Therefore
they can be used in explosive atmosphere (zone1 ; group IIC). Inflammable gases and flammable
gases (only temporary explosive in normal operation, zone 1; group IIC) can be led through this gas
filters.
Note indications of risk in the installation- and operation manual of the filter!
Filter elements
Part no. Type Seal Material Temp. max. Pore size Area Pcs.
78 56 966 DRG 25 VA-V Viton 1.4301 / epoxy resin 250 °F 25 µm 10.9 in² 1
78 56 974 DRG 60 VA-V Viton 1.4301 / epoxy resin 250 °F 60 µm 10.9 in² 1
78 56 982 DRG 100 VA-V Viton 1.4301 / epoxy resin 250 °F 100 µm 10.9 in² 1
41 03 003 DRG 25 SO-V Viton 1.4301 / 1.4401 300 °F 25 µm 10.9 in² 1
41 03 004 DRG 60 SO-V Viton 1.4301 / 1.4401 300 °F 60 µm 10.9 in² 1
41 03 008 DRG 25 SO-P Perfluorelastomer 1.4301 / 1.4401 500 °F** 25 µm 10.9 in² 1
41 03 009 DRG 60 SO-P Perfluorelastomer 1.4301 / 1.4401 500 °F** 60 µm 10.9 in² 1
41 03 00 50 F2 -- PTFE sintered 212 °F 2 µm 9.3 in² 5
41 02 01 30 F25 -- PTFE sintered 212 °F 25 µm 9.3 in² 5
Other filter elements available upon request
** At reduced maximum pressure
we reserve the right to amend specification