Professional Documents
Culture Documents
11’’
(279 mm)
0.8125’’ Dia.
(21 mm)
Section Length
8’’
(203 mm)
0.9375’’ Dia.
(24 mm)
4’’
(102 mm)
4.125’’ 4.125’’
(105 mm) (105 mm) 0.8125’’ Dia.
(21 mm)
8’’
(203 mm)
1.125’’
(29 mm)
Notes:
1) For voltages above 161 kV, other section lengths, or end fitting combinations, please contact your HPS representative.
2) Electrical values are without corona ring. For voltages equal to or greater than 220 kV, refer to page 20 for corona rings and associated
physical/electrical changes to the above data. Dimensions are within allowable tolerances as specified by IEC 61952 and ANSI C29.17.
3) The catalog number shown on the table is for a 2.5” (63.5mm) rod diameter line post with a vertical clamptop on the line end and a 5’’ Bolt
Circle with tapped holes on the ground end. For other end fitting combinations, please refer to the Catalog Number Key on page 8.
Post
e Top Fitting
250 — Series 250, standard strength 2.5”,
(63.5 mm)
Suspension Insulators
Suspension Insulators LineLine
PostPost Insulators
Insulators
S 0 2 5 0 4 9 H 2