Professional Documents
Culture Documents
EN
A large number of rollers are kept in inventory to assure availability and quick deliveries.
Each roller consists of a heavy gauge steel side of the roller, by seals which withhold the
tube carrying surface, with pressed steel lubricant and at the same time prevent the
end-caps that are precision welded together entrance of contaminants.
to form a monolithic structure of exceptional
strength that guarantees maximum precision 30,000 working hours
and minimum imbalance on the overall roller The unique design of the totally hermetic seal
diameter. A rotational test is performed on consisting of inner seal, triple labyrinth, outer
100% of rollers. rubber V-ring and centrifugal self cleaning
chamber protects the bearing against possible
Sealed for life entrance of contaminants, such as rain, dirt,
A quality roller is characterised by its effective dust, etc. with a minimum of friction drag. Life
sealing system. Scrupulous research tests and, projection is 30,000 working hours or more
above all, the practical plant experience in depending on the load.
the most variable environmental situations, The ideal static and dynamic balance
has made it possible to develop a particular of the PSV roller eliminates vibrations and
sealing that guarantees optimum bearing bearing hammering and thus guarantees
performance. trouble- and noise free running even in high
The bearings are lubricated with long life speed applications year after year. The rollers
lithium based water repellent grease which are galvanized to resist corrosion.
off ers high stability under various atmos-
pheric conditions. The quantity of grease is Low starting and rolling resistance
suffi cient for the life of the roller eliminating The PSV roller has low starting and rolling
lubrication and maintenance costs. The bear- resistance for minimal power consumption
ing is protected, on the external and internal and low cost operation. All rollers are
Support frames
Sturdy cross-angle support frames have the The Garland designs ability to absorb dynamic forces extend the life of both
roller brackets accurately jig welded in place. conveyor belts and rollers.
Support frames can be supplied straight or
with the end brackets tilted a few degrees
in the direction of conveyor belt travel to
aid the throughing rollers in centering the
belt. Longitudinal slots for mounting bolts
facilitate alignment of idlers. Also available
are suspended “Garland” sets.
The Garland set consists of rollers connected
by chain links. The suspended design is flex-
ible increasing the ability to absorb dynamic
stresses. It´s especially suitable for high speed
operations carrying large size material.
Subject to alteration without prior notice. Brochure No. 2446-03-10-SBL/Trelleborg-English © 2013.02 Metso Printed in Sweden