Professional Documents
Culture Documents
Model Examination
Sub Name: Microcontroller and PLC QP Set: SET-B
Sub Code MT6601 Department: Mechatronics
Date: 07/04/2017 Year & Sec: III
Timing: 10.00 am to 1.00 pm Max Mark: 100 Marks
13. (a) (i) Explain with neat diagram architecture of 8051. [16]
(or)
(b) (i) Explain the various addressing modes of 8051. [8]
(ii) Enumerate the ports available in 8051 microcontroller [8]
14. (a) (i) Explain the different operating modes of timer in 8051 microcontroller. [8]
(ii) Write an assembly language program in 8051 to generate a delay of 25 ms. [8]
(or)
(b) (i) Which events can trigger interrupts and what happens? [8]
(ii) Write an assembly language program in 8051 to find the sum of 20 elements in an [8]
array
Agni College of Technology
Thalambur, Chennai 600 130
Office of Examcell
15. (a) (i) Explain the interfacing A/D converter with 8051 microcontroller. Write the [8]
assembly language program for the same.
(ii) Describe the serial interface with 8051 microcontroller. [8]
(or)
(b) (i) Explain how intelligent LCD displays can be interfaced with 8051 [16]
microcontroller? Write an assembly language program for the same.
16. (a) (i) List and describe the functions of hardware components in PLC system. [8]
(ii) Describe the PLC program scan. [8]
(or)
(b) (i) Explain the basic operation of manually operated switch [8]
(ii) Write the ladder logic program needed to implement each of the following. [8]
1. When input A is closed, turned ON and hold ON output X and Y until A opens.
2. When input A is closed and either input B and C is open, turn ON output Y,
otherwise it should be OFF.
17. (a) (i) Explain the basic operation of Retentive timer with neat diagram. [8]
(ii) Design a ladder diagram to wash the car automatically. Explain with necessary [8]
assumptions.
(or)
(b) (i) When the lights are turned OFF in a building, an exit door light is to remain on [8]
for an additional 2 min. and the parking lot lights are top remain on for additional
3 min after the door light goes out. Write a program to implement this process.
(ii) Explain the function of the major components of process control system. [8]
***********
No. of copies : 53