Professional Documents
Culture Documents
3.2010 222 16 01 1( 3 )
W2006584
This information covers replacing the piston cooling solenoid on the VOLVO D13H engines.
Contents
• “Piston Cooling Solenoid, Replacement”, page 2
PV776-88961424 USA40651
Volvo Trucks North America Date Group No. Release Page
Service Bulletin 3.2010 222 16 01 2( 3 )
Service Procedures
2229-03-02-04
Piston Cooling Solenoid, Replacement
Removal
1
1
Remove all battery cables from ground (negative)
terminals to prevent personal injury from electric shock.
2
2
Open the hood.
3
3
Clean the area around the piston cooling solenoid.
4
4
Disconnect the wiring harness from the piston cooling
solenoid. Remove the fasteners and remove the piston
cooling solenoid from the oil filter housing.
W2053702
Installation
1
1
Clean the solenoid contact surface on the oil filter
housing.
2
2
Lubricate a new O-ring with clean engine oil and install
onto the piston cooling solenoid.
3
3
Install the piston cooling solenoid into the oil filter housing.
Install the mounting fasteners and tighten to specification.
W2053702