Professional Documents
Culture Documents
Page: 1 of 6
1. Identification
GHS Product SULFUR
Identifier
Company Name CHEM-SUPPLY PTY LTD (ABN 19 008 264 211)
Address 38 - 50 Bedford Street GILLMAN
SA 5013 Australia
Telephone/Fax Tel: (08) 8440-2000
Number Fax: (08) 8440-2001
Recommended use Sulfuric acid manufacture, paper and pulp manufacture, carbon disulfide, rubber vulcanization,
of the chemical and detergents, petroleum refining, dyes and chemicals, drugs and pharmaceuticals, explosives,
restrictions on use insecticides, rodent repellents, soil conditioner, fungicide, coating for controlled-release fertilisers,
nucleating agent for photographic film, cement sealant, binder and asphalt extender in road paving, base
material for low-temperature mortars, and laboratory reagent.
Other Names Name Product Code
SULFUR Small Pastilles ST262
SULFUR Roll ST053
Brimstone
Flowers of sulfur
SULFUR LR SL006
SULFUR TG ST006
Additional Sulfur is not subject to the provisions of the Australian Dangerous Goods Code entry Sulfur UN 1350
Information when it is transported in quantities of less than 400 kg per package, or when it has been formed to a
specific shape (e.g. prills, granules, pellets, pastilles or flakes).
Sulfur is not subject to the provisions of the International Maritime Dangerous Goods Code entry Sulfur
UN 1350 when it has been formed to a specific shape (e.g. prills, granules, pellets, pastilles or flakes).
Other Information EMERGENCY CONTACT NUMBER: +61 08 8440 2000
Business hours: 8:30am to 5:00pm, Monday to Friday.
Chem-Supply Pty Ltd does not warrant that this product is suitable for any use or purpose. The user
must ascertain the suitability of the product before use or application intended purpose. Preliminary
testing of the product before use or application is recommended. Any reliance or purported reliance
upon Chem-Supply Pty Ltd with respect to any skill or judgement or advice in relation to the suitability of
this product of any purpose is disclaimed. Except to the extent prohibited at law, any condition implied by
any statute as to the merchantable quality of this product or fitness for any purpose is hereby excluded.
This product is not sold by description. Where the provisions of Part V, Division 2 of the Trade Practices
Act apply, the liability of Chem-Supply Pty Ltd is limited to the replacement of supply of equivalent goods
or payment of the cost of replacing the goods or acquiring equivalent goods.
2. Hazard Identification
GHS classification Flammable Solids: Category 2
of the Skin Corrosion/Irritation: Category 2
substance/mixture
Signal Word (s) WARNING
Hazard Statement H228 Flammable solid.
(s) H315 Causes skin irritation.
Pictogram (s) Exclamation mark, Flame
Page: 2 of 6
3. Composition/information on ingredients
Chemical Solid
Characterization
Ingredients Name CAS Proportion Hazard Symbol Risk Phrase
Sulfur 7704-34-9 100 % Xi, F R36/38, R11
4. First-aid measures
Inhalation If inhaled, remove from contaminated area to fresh air immediately. Apply artificial respiration if not
breathing. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Ingestion Rinse mouth thoroughly with water immediately. Give plenty of water to drink. Do not induce vomiting.
Seek medical attention.
Skin Wash with plenty of soap and water. Remove contaminated clothing and wash before re-use. Seek
immediate medical advice.
Eye contact Immediately irrigate with copious quantity of water for at least 15 minutes. Eyelids to be held open.
Seek medical attention.
First Aid Facilities Maintain eyewash fountain and safety shower in work area.
Advice to Doctor Treat symptomatically or consult a Poisons Information Centre.
Other Information For advice, contact the National Poisons Information Centre (Phone Australia 13 11 26New Zealand
0800 764 766) or a doctor.
5. Fire-fighting measures
Hazards from Librates toxic fumes in fire (sulfur oxides, hydrogen sulfide gas).
Combustion
Products
Specific Methods Small fire: Use dry chemical, CO2, water spray or foam.
Large fire: Use water spray, fog or foam.
If safe to do so, move undamaged containers from fire area. Cool containers with flooding quantities of
water until well after fire is out.
Specific hazards May be ignited by friction, heat, sparks or flame. Vapours, dust, borings or turnings may form
arising from the combustible mixtures with air. May burn fiercely. May re-ignite after fire is extinguished. Fire may
chemical produce irritating, poisonous and/or corrosive gases. Containers may explode when heated. Runoff may
pollute waterways. May be transported in a molten form. Solids may melt and flow when heated or
involved in a fire.
Hazchem Code 1Z
Precautions in Wear SCBA and chemical splash suit. Structural firefighter's uniform may provide limited protection.
connection with Fire
6. Accidental release measures
Spills & Disposal Eliminate all ignition sources (no smoking, flares, sparks or flames) within at least 15m. Do not touch or
walk through spilled material. Prevent entry into waterways, drains or confined areas. Obtain expert
advice on use of water as spilled material may be water-reactive. Prevent dust cloud. Use clean
non-sparking tools to collect absorbed material and place it into loosely-covered metal or plastic
containers for later disposal. SEEK EXPERT ADVICE ON HANDLING AND DISPOSAL.
Personal Avoid substance contact. Avoid generation of dusts: do not inhale dusts. Ensure supply of fresh air in
Precautions enclosed rooms.
Personal Protection Wear protective clothing specified for normal operations (see Section 8)
Clean-up Methods - Sweep up (avoid generating dust) and remove to a suitable, clearly labelled container for disposal in
Small Spillages accordance with local regulations.
Clean-up Methods - Seek expert advice on handling and disposal.
Large Spillages
7. Handling and storage
Precautions for Safe Avoid generation or accumulation of dusts. Avoid prolonged or repeated contact with skin, eyes and
Handling clothing . Take precautionary measures against static discharges. Use in well ventilated areas away
from all ignition sources. In case of insufficient ventilation, wear suitable respiratory equipment.
Contaminated clothing should be removed and washed before reuse.
Page: 3 of 6
Page: 4 of 6
Page: 5 of 6
Page: 6 of 6
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Acohs Pty Ltd.
The compilation of MSDS's displayed is the intellectual property of Acohs Pty Ltd.
Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of sale or licence or for inclusion as part of a collection of
MSDS without the express written consent of Acohs Pty Ltd.