Professional Documents
Culture Documents
• Each Leak Master is provided with a calibration • Fast and easy periodic checks
certificate that can be referred to national • Staubli® connector
and international primary instruments as per
ISO9001
Leak Masters
Rev. 01/17
To answer to all the quality control At a given pressure, a leak master Staubli® connection and are available in
needs, the Leak Masters are the ideal guarantees a given leak flow rate. a wide range of values, both standard
operational tools to periodically check By inserting the leak master in the test and customer-specified.
the efficiency of the testing systems in circuit, you can easily check both the
a quick and easy way. testing equipment and the mechanical
connections to the tested product.
Leak Masters have a convenient
Leak type
Standard leak rates: cm3/min (+/- 20%)
The products presented in this catalogue are subject to normal technical and design modifications, without prior notice and without responsibilities for the manufacturer.
Pressure test Reference environmental conditions: 20 °C, 1013 hPa
A0 A1 A B C D E F G H I K M N
20 mbar 0,137 0,266 0,599 1,243 2,29 5,62 55 197
50 mbar 0,138 0,347 0,719 1,357 3,09 6,31 15,36 138,93 457,3
100 mbar 0,146 0,282 0,705 1,458 2,8 6,26 12,99 33,91 270,8 823,8
150 mbar 0,109 0,224 0,429 1,079 2,15 4,7 9,59 18,31 47,43 400,2 1158
200 mbar 0,148 0,305 0,585 1,467 3,01 5,8 13,08 27,86 69,6 526,8 1466,2
300 mbar 0,101 0,231 0,474 0,907 2,33 4,52 9,76 19,51 40,43 101,85 770,7 2063
500 mbar 0,08 0,174 0,413 0,845 1,615 4,19 8,21 16,15 35,15 78,42 193,43 1259,6 3151
1 bar 0,183 0,4 0,959 2,003 3,843 9,73 19,1 37,82 82,85 187,42 425,8 2472 5532
2 bar 0,102 0,458 0,996 2,41 5,05 9,74 24,52 48,07 91,88 213 469,3 968,2 4849 9836
3 bar 0,182 0,824 1,753 4,33 8,97 17,43 43,4 83,35 155,13 389,2 826 1577,3 7128 14244
4 bar 0,28 1,268 2,73 6,77 13,67 26,76 65,5 123 220,2 606,8 1253,5 2277 9532 18650
5 bar 0,396 1,78 3,85 9,59 18,92 37,25 89,96 167,5 294,2 863,7 1713 3001 11986 22605
8 bar 0,842 3,81 8,08 19,66 37,25 74,57 172,82 303 525,5 1828 3357 5296 19379 36140
10 bar 1,213 5,38 11,57 27,4 51,27 102,63 230,3 402,2 688,2 2665 4526 6751
REFERENCE CONDITIONS:
• The leak masters can be certified on request at normalized standard conditions (0 °C, 1013 hPa)
Calibration service
Each equipment is accompanied by a calibration certificate released by Tecna srl.
According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test
samples.
Tecna srl, through its own specialized personnel and certified instruments, offers a complete scheduled calibration service.