Professional Documents
Culture Documents
5.1
Load-span tables
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Multi Span II (f) 4.22 3.08 2.50 2.13 1.88 1.69 1.54 1.42 1.33 1.25 1.18 1.12 1.07 1.03 0.99 0.95 0.92 0.89 0.86 0.84
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
III (f) 4.22 3.08 2.50 2.13 1.88 1.69 1.54 1.42 1.33 1.25 1.18 1.12 1.07 1.03 0.99 0.95 0.92 0.89 0.86 0.84
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.2
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.3
Load-span tables
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Multi Span II (f) 5.30 3.82 3.04 2.54 2.20 1.94 1.75 1.59 1.47 1.37 1.28 1.21 1.15 1.10 1.05 1.01 0.97 0.94 0.91 0.88
60 60 60 60 60 60 60 60 60 60 60 60 60 62 63 65 66 68 69 71
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
III (f) 5.30 3.82 3.04 2.54 2.20 1.94 1.75 1.59 1.47 1.37 1.28 1.21 1.15 1.10 1.05 1.01 0.97 0.94 0.91 0.88
60 60 60 60 60 60 60 60 60 60 60 60 60 62 63 65 66 68 69 71
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.4
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.5
Load-span tables
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Multi Span II (f) 6.34 4.49 3.57 3.02 2.64 2.37 2.16 2.00 1.83 1.68 1.55 1.44 1.35 1.27 1.20 1.15 1.10 1.05 1.01 0.98
60 60 60 60 60 60 63 66 68 69 69 70 71 72 73 74 75 76 77 79
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
III (f) 6.34 4.49 3.57 3.02 2.64 2.37 2.16 2.00 1.83 1.68 1.55 1.44 1.35 1.27 1.20 1.15 1.10 1.05 1.01 0.98
60 60 60 60 60 60 63 66 68 69 69 70 71 72 73 74 75 76 77 79
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.6
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.7
Load-span tables
40 40 40 40 40 40 40 40 40 40 40 40 41 43 43 43 43 43 44 44
Multi Span II (f) 6.90 4.85 3.84 3.22 2.80 2.50 2.27 2.09 1.95 1.82 1.72 1.64 1.56 1.50 1.42 1.34 1.26 1.20 1.14 1.10
60 60 60 60 60 60 66 69 72 75 77 80 82 85 86 86 86 87 87 88
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
III (f) 6.90 4.85 3.84 3.22 2.80 2.50 2.27 2.09 1.95 1.82 1.72 1.64 1.56 1.50 1.42 1.34 1.26 1.20 1.14 1.10
60 60 60 60 60 60 66 69 72 75 77 80 82 85 86 86 86 87 87 88
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.8
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.9
Load-span tables
40 40 40 40 40 40 41 43 45 46 48 49 50 52 53 55 56 57 58 58
Multi Span II (f) 7.22 5.07 3.99 3.34 2.90 2.58 2.34 2.15 2.00 1.87 1.76 1.67 1.59 1.52 1.46 1.41 1.36 1.32 1.26 1.20
60 60 65 70 74 78 82 86 89 92 95 98 101 104 106 109 112 115 116 116
40 40 40 40 40 40 41 43 45 46 48 49 50 52 53 55 56 57 58 58
III (f) 7.22 5.07 3.99 3.34 2.90 2.58 2.34 2.15 2.00 1.87 1.76 1.67 1.59 1.52 1.46 1.41 1.36 1.32 1.26 1.20
60 60 65 70 74 78 82 86 89 92 95 98 101 104 106 109 112 115 116 116
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.10
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.11
Load-span tables
40 40 42 45 48 50 52 55 57 59 61 63 64 66 68 70 71 73 74 76
Multi Span II (f) 7.41 5.20 4.09 3.42 2.96 2.63 2.38 2.19 2.03 1.90 1.79 1.70 1.62 1.55 1.48 1.43 1.38 1.33 1.29 1.26
64 76 84 90 95 100 105 109 113 117 121 125 129 132 135 139 142 145 148 152
40 40 42 45 48 50 52 55 57 59 61 63 64 66 68 70 71 73 74 76
III (f) 7.41 5.20 4.09 3.42 2.96 2.63 2.38 2.19 2.03 1.90 1.79 1.70 1.62 1.55 1.48 1.43 1.38 1.33 1.29 1.26
64 76 84 90 95 100 105 109 113 117 121 125 129 132 135 139 142 145 148 152
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 RW 333.3 mm 333.3 mm 333.3 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.12
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.13
Load-span tables
49 60 67 74 78 82 85 87 88 90 90 91 91 91 91 91 91 91 91 91
Multi Span II (f) 6.28 4.93 4.13 3.58 3.16 2.83 2.55 2.32 2.12 1.95 1.80 1.67 1.55 1.45 1.36 1.28 1.20 1.14 1.08 1.04
99 120 135 147 157 164 170 174 177 179 181 182 182 182 182 182 182 182 182 182
49 60 67 74 78 82 85 87 88 90 90 91 91 91 91 91 91 91 91 91
III (f) 6.28 4.93 4.13 3.58 3.16 2.83 2.55 2.32 2.12 1.95 1.80 1.67 1.55 1.45 1.36 1.28 1.20 1.14 1.08 1.04
99 120 135 147 157 164 170 174 177 179 181 182 182 182 182 182 182 182 182 182
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 FF 250 mm 250 mm 250 mm 250 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.14
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.15
Load-span tables
49 60 67 74 78 82 85 87 88 90 90 91 91 91 91 91 51 91 91 91
Multi Span II (f) 6.28 4.93 4.13 3.58 3.16 2.83 2.55 2.32 2.12 1.95 1.80 1.67 1.55 1.45 1.36 1.28 1.20 1.14 1.08 1.04
99 120 135 147 157 164 170 174 177 179 179 182 182 182 182 182 101 182 182 182
49 60 67 74 78 82 85 87 88 90 90 91 91 91 91 91 51 91 91 91
III (f) 6.28 4.93 4.13 3.58 3.16 2.83 2.55 2.32 2.12 1.95 1.80 1.67 1.55 1.45 1.36 1.28 1.20 1.14 1.08 1.04
99 120 135 147 157 164 170 174 177 179 179 182 182 182 182 182 101 182 182 182
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 FF 250 mm 250 mm 250 mm 250 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.16
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.17
Load-span tables
50 71 73 74 76 78 79 81 82 84 86 87 89 90 92 94 95 97 98 100
Multi Span II (f) 5.74 5.52 4.25 3.48 2.97 2.60 2.33 2.11 1.94 1.80 1.68 1.58 1.49 1.42 1.36 1.30 1.25 1.20 1.16 1.12
100 142 146 149 152 155 159 162 165 168 171 174 177 181 185 188 191 193 197 200
50 71 73 74 76 78 79 81 82 84 86 87 89 90 92 94 95 97 98 100
III (f) 5.74 5.52 4.25 3.48 2.97 2.60 2.33 2.11 1.94 1.80 1.68 1.58 1.49 1.42 1.36 1.30 1.25 1.20 1.16 1.12
100 142 146 149 152 155 159 162 165 168 171 174 177 181 185 188 191 193 197 200
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 FF 250 mm 250 mm 250 mm 250 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.18
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
1,000 mm – cover width
5.19
Load-span tables
53 72 74 76 77 79 80 82 84 85 87 89 90 92 94 95 97 99 100 102
Multi Span II (f) 7.52 6.36 4.74 3.81 3.21 2.78 2.47 2.23 2.04 1.88 1.76 1.65 1.56 1.48 1.41 1.34 1.29 1.24 1.20 1.14
107 144 148 152 154 157 161 164 168 170 174 177 180 184 188 190 194 198 200 204
53 72 74 76 77 79 80 82 84 85 87 89 90 92 94 95 97 99 100 102
III (f) 7.52 3.63 4.74 3.81 3.21 2.78 2.47 2.23 2.04 1.88 1.76 1.65 1.56 1.48 1.41 1.34 1.29 1.24 1.20 1.14
107 144 148 152 154 157 161 164 168 170 174 177 180 184 188 190 194 198 200 204
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
1,000 mm – cover width
Load-span tables
KS1000 FF 250 mm 250 mm 250 mm 250 mm
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.20
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.21
Load-span tables
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Multi Span II (f) 6.51 4.65 3.82 3.34 3.01 2.77 2.58 2.43 2.16 1.94 1.77 1.62 1.50 1.39 1.30 1.22 1.14 1.08 1.02 0.98
60 60 60 60 60 65 71 77 77 76 77 77 77 77 77 77 77 77 77 77
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
III (f) 6.51 4.65 3.82 3.34 3.01 2.77 2.58 2.43 2.16 1.94 1.77 1.62 1.50 1.39 1.30 1.22 1.14 1.08 1.02 0.98
60 60 60 60 60 65 71 77 77 76 77 77 77 77 77 77 77 77 77 77
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.22
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.23
Load-span tables
40 40 40 40 40 40 44 47 50 53 56 58 58 58 58 58 58 58 58 58
Multi Span II (f) 8.02 5.72 4.71 4.12 3.71 3.41 3.18 2.99 2.84 2.71 2.60 2.46 2.27 2.11 1.97 1.85 1.74 1.64 1.56 1.48
60 60 60 65 73 81 88 94 101 107 113 116 116 116 116 116 116 116 116 116
40 40 40 40 40 40 44 47 50 53 56 58 58 58 58 58 58 58 58 58
III (f) 8.02 5.72 4.71 4.12 3.71 3.41 3.18 2.99 2.84 2.71 2.60 2.46 2.27 2.11 1.97 1.85 1.74 1.64 1.56 1.48
60 60 60 65 73 81 88 94 101 107 113 116 116 116 116 116 116 116 116 116
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.24
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.25
Load-span tables
40 40 40 40 42 47 51 55 58 62 65 69 72 75 78 78 78 78 78 78
Multi Span II (f) 9.29 6.63 5.46 4.77 4.30 3.95 3.68 3.47 3.29 3.14 3.01 2.90 2.80 2.72 2.64 2.48 2.33 2.20 2.09 1.98
60 60 64 75 85 93 102 110 117 124 130 137 144 150 156 156 156 156 156 156
40 40 40 40 42 47 51 55 58 62 65 69 72 75 78 78 78 78 78 78
III (f) 9.29 6.63 5.46 4.77 4.30 3.95 3.68 3.47 3.29 3.14 3.01 2.90 2.80 2.72 2.64 2.48 2.33 2.20 2.09 1.98
60 60 64 75 85 93 102 110 117 124 130 137 144 150 156 156 156 156 156 156
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.26
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.27
Load-span tables
40 40 43 51 57 63 68 74 79 84 88 93 97 102 106 108 108 108 109 109
Multi Span II (f) 10.42 7.44 6.13 5.35 4.83 4.44 4.14 3.90 3.71 3.54 3.40 3.27 3.16 3.07 2.98 2.87 2.70 2.55 2.42 2.30
60 70 87 101 114 126 137 147 158 167 177 185 194 203 212 217 217 217 217 217
40 40 43 51 57 63 68 74 79 84 88 93 97 102 106 108 108 108 109 109
III (f) 10.42 7.44 6.13 5.35 4.83 4.44 4.14 3.90 3.71 3.54 3.40 3.27 3.16 3.07 2.98 2.87 2.70 2.55 2.42 2.30
60 70 87 101 114 126 137 147 158 167 177 185 194 203 212 217 217 217 217 217
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.28
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.29
Load-span tables
40 48 60 70 79 87 94 102 109 115 122 128 134 140 146 150 150 150 150 150
Multi Span II (f) 11.44 8.17 6.74 5.89 5.32 4.90 4.57 4.31 4.09 3.91 3.75 3.62 3.50 3.39 3.30 3.17 2.98 2.82 2.67 2.53
68 97 120 139 157 174 189 204 217 231 244 257 269 280 292 300 300 300 300 300
40 48 60 70 79 87 94 102 109 115 122 128 134 140 146 150 150 150 150 150
III (f) 11.44 8.17 6.74 5.89 5.32 4.90 4.57 4.31 4.09 3.91 3.75 3.62 3.50 3.39 3.30 3.17 2.98 2.82 2.67 2.53
68 97 120 139 157 174 189 204 217 231 244 257 269 280 292 300 300 300 300 300
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.30
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.31
Load-span tables
40 48 59 69 77 86 93 100 107 114 120 126 132 138 144 150 155 160 165 165
Multi Span II (f) 12.81 9.15 7.55 6.60 5.96 5.49 5.12 4.83 4.59 4.38 4.21 4.06 3.92 3.80 3.70 3.60 3.51 3.43 3.34 3.18
67 95 118 137 155 171 186 201 214 227 240 253 265 276 288 300 310 321 330 330
40 48 59 69 77 86 93 100 107 114 120 126 132 138 144 150 155 160 165 165
III (f) 12.81 9.15 7.55 6.60 5.96 5.49 5.12 4.83 4.59 4.38 4.21 4.06 3.92 3.80 3.70 3.60 3.51 3.43 3.34 3.18
67 95 118 137 155 171 186 201 214 227 240 253 265 276 288 300 310 321 330 330
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.32
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.33
Load-span tables
40 47 58 67 76 84 91 98 105 111 118 124 130 136 141 147 152 157 162 168
Multi Span II (f) 13.65 9.75 8.04 7.03 6.35 5.85 5.46 5.15 4.89 4.67 4.49 4.32 4.18 4.06 3.94 3.84 3.75 3.66 3.58 3.51
65 93 115 134 152 168 182 197 210 223 236 247 259 272 282 293 304 314 325 335
40 47 58 67 76 84 91 98 105 111 118 124 130 136 141 147 152 157 162 168
III (f) 13.65 9.75 8.04 7.03 6.35 5.85 5.46 5.15 4.89 4.67 4.49 4.32 4.18 4.06 3.94 3.84 3.75 3.66 3.58 3.51
65 93 115 134 152 168 182 197 210 223 236 247 259 272 282 293 304 314 325 335
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.34
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.35
Load-span tables
40 45 56 66 74 82 89 96 103 109 115 121 127 133 138 144 149 154 158 162
Multi Span II (f) 14.81 10.59 8.74 7.64 6.90 6.35 5.93 5.59 5.32 5.08 4.88 4.70 4.55 4.41 4.29 4.18 4.08 3.98 3.88 3.78
64 91 113 132 148 164 178 192 206 218 231 242 254 265 276 287 298 308 317 325
40 45 56 66 74 82 89 96 103 109 115 121 127 133 138 144 149 154 158 162
III (f) 14.81 10.59 8.74 7.64 6.90 6.35 5.93 5.59 5.32 5.08 4.88 4.70 4.55 4.41 4.29 4.18 4.08 3.98 3.88 3.78
64 91 113 132 148 164 178 192 206 218 231 242 254 265 276 287 298 308 317 325
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 TF 1,150 mm – cover width
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.36
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.37
Load-span tables
I (f) 6.68 4.88 4.10 3.33 2.66 2.22 1.90 1.66 1.48 1.33 1.21 1.11 1.02 0.96 0.89 0.84 0.79 0.74 0.71 0.67
60 83 104 113 113 113 113 113 113 113 113 113 113 113 114 114 114 114 114 114
40 47 52 56 56 56 56 56 56 56 56 56 56 56 57 57 57 57 57 57
Multi Span II (f) 6.68 4.88 4.10 3.33 2.66 2.22 1.90 1.66 1.48 1.33 1.21 1.11 1.02 0.96 0.89 0.84 0.79 0.74 0.71 0.67
60 83 104 113 113 113 113 113 113 113 113 113 113 113 114 114 114 114 114 114
40 47 52 56 56 56 56 56 56 56 56 56 56 56 57 57 57 57 57 57
III (f) 6.68 4.88 4.10 3.33 2.66 2.22 1.90 1.66 1.48 1.33 1.21 1.11 1.02 0.96 0.89 0.84 0.79 0.74 0.71 0.67
60 83 104 113 113 113 113 113 113 113 113 113 113 113 114 114 114 114 114 114
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 FR, KS1000 FH 1,150 mm – cover width
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.38
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.39
Load-span tables
40 47 56 56 57 56 56 57 57 57 57 57 56 56 56 56 56 56 56 56
I (f) 7.55 5.56 4.44 3.33 2.67 2.22 1.90 1.67 1.48 1.33 1.21 1.11 1.02 0.96 0.90 0.84 0.79 0.75 0.71 0.67
64 97 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113
40 47 56 56 57 56 56 57 57 57 57 57 56 56 56 56 56 56 56 56
Multi Span II (f) 7.55 5.56 4.44 3.33 2.67 2.22 1.90 1.67 1.48 1.33 1.21 1.11 1.02 0.96 0.90 0.84 0.79 0.75 0.71 0.67
64 94 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113
40 47 56 56 57 56 56 57 57 57 57 57 56 56 56 56 56 56 56 56
III (f) 7.55 5.56 4.44 3.33 2.67 2.22 1.90 1.67 1.48 1.33 1.21 1.11 1.02 0.96 0.90 0.84 0.79 0.75 0.71 0.67
64 94 113 113 113 113 113 114 113 113 113 113 113 113 113 113 113 113 113 113
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 FR, KS1000 FH 1,150 mm – cover width
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.40
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.41
Load-span tables
I (f) 7.10 5.37 4.61 3.61 2.89 2.41 2.06 1.80 1.60 1.44 1.31 1.20 1.10 1.03 0.97 0.91 0.85 0.81 0.76 0.72
61 92 118 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122
40 46 59 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61
Multi Span II (f) 7.10 5.37 4.61 3.61 2.89 2.41 2.06 1.80 1.60 1.44 1.31 1.20 1.10 1.03 0.97 0.91 0.85 0.81 0.76 0.72
61 92 118 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122
40 46 59 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61
III (f) 7.10 5.37 4.61 3.61 2.89 2.41 2.06 1.80 1.60 1.44 1.31 1.20 1.10 1.03 0.97 0.91 0.85 0.81 0.76 0.72
68 92 118 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 FR, KS1000 FH 1,150 mm – cover width
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.42
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.43
Load-span tables
I (f) 5.95 4.86 4.34 3.76 3.01 2.51 2.15 1.88 1.67 1.50 1.36 1.25 1.16 1.07 1.00 0.95 0.89 0.84 0.79 0.76
60 82 105 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127
40 41 52 64 64 64 64 64 63 63 63 63 63 63 64 64 64 64 64 64
Multi Span II (f) 5.95 4.86 4.34 3.76 3.01 2.51 2.15 1.88 1.67 1.50 1.36 1.25 1.16 1.07 1.00 0.95 0.89 0.84 0.79 0.76
60 82 105 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127
40 41 52 64 64 64 64 64 63 63 63 63 63 63 64 64 64 64 64 64
III (f) 5.95 4.86 4.34 3.76 3.01 2.51 2.15 1.88 1.67 1.50 1.36 1.25 1.16 1.07 1.00 0.95 0.89 0.84 0.79 0.76
60 82 105 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1150 FR, KS1000 FH 1,150 mm – cover width
The span tables are valid for the wall systems KS1000 FR and KS1000 FH. Maximum spans in combination with secret fixing are not part of these calculations.
Regarding the secret fixing of KS1000 FH, please call your technical department.
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.44
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.45
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 60 E/I 0.6 / 0.4 – according to EN 14509
Load-span tables
40 40 40 40 40 40 44 47 50 53 56 58 58 58 58 58 58 58 58 58
Multi Span II (f) 8.02 5.72 4.71 4.12 3.71 3.41 3.18 2.99 2.84 2.71 2.60 2.46 2.27 2.11 1.97 1.85 1.74 1.64 1.56 1.48
60 60 60 65 73 81 88 94 101 107 113 116 116 116 116 116 116 116 116 116
40 40 40 40 40 40 44 47 50 53 56 58 58 58 58 58 58 58 58 58
III (f) 8.02 5.72 4.71 4.12 3.71 3.41 3.18 2.99 2.84 2.71 2.60 2.46 2.27 2.11 1.97 1.85 1.74 1.64 1.56 1.48
60 60 60 65 73 81 88 94 101 107 113 116 116 116 116 116 116 116 116 116
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 60 E/I 0.6 / 0.4 – according to EN 14509
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.46
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.47
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 80 E/I 0.6 / 0.4 – according to EN 14509
Load-span tables
40 40 40 40 42 47 51 55 58 62 65 69 72 75 78 78 78 78 78 78
Multi Span II (f) 9.29 6.63 5.46 4.77 4.30 3.95 3.68 3.47 3.29 3.14 3.01 2.90 2.80 2.72 2.64 2.48 2.33 2.20 2.09 1.98
60 60 64 75 85 93 102 110 117 124 130 137 144 150 156 156 156 156 156 156
40 40 40 40 42 47 51 55 58 62 65 69 72 75 78 78 78 78 78 78
III (f) 9.29 6.63 5.46 4.77 4.30 3.95 3.68 3.47 3.29 3.14 3.01 2.90 2.80 2.72 2.64 2.48 2.33 2.20 2.09 1.98
60 60 64 75 85 93 102 110 117 124 130 137 144 150 156 156 156 156 156 156
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 80 E/I 0.6 / 0.4 – according to EN 14509
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.48
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.49
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 100 E/I 0.6 / 0.4 – according to EN 14509
Load-span tables
40 40 43 51 57 63 68 74 79 84 88 93 97 102 106 108 108 108 109 109
Multi Span II (f) 10.42 7.44 6.13 5.35 4.83 4.44 4.14 3.90 3.71 3.54 3.40 3.27 3.16 3.07 2.98 2.87 2.70 2.55 2.42 2.30
60 70 87 101 114 126 137 147 158 167 177 185 194 203 212 217 217 217 217 217
40 40 43 51 57 63 68 74 79 84 88 93 97 102 106 108 108 108 109 109
III (f) 10.42 7.44 6.13 5.35 4.83 4.44 4.14 3.90 3.71 3.54 3.40 3.27 3.16 3.07 2.98 2.87 2.70 2.55 2.42 2.30
60 70 87 101 114 126 137 147 158 167 177 185 194 203 212 217 217 217 217 217
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 100 E/I 0.6 / 0.4 – according to EN 14509
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.50
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.51
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 120 E/I 0.6 / 0.4 – according to EN 14509
Load-span tables
40 48 60 70 79 87 94 102 109 115 122 128 134 140 146 150 150 150 150 150
Multi Span II (f) 11.44 8.17 6.74 5.89 5.32 4.90 4.57 4.31 4.09 3.91 3.75 3.62 3.50 3.39 3.30 3.17 2.98 2.82 2.67 2.53
68 97 120 139 157 174 189 204 217 231 244 257 269 280 292 300 300 300 300 300
40 48 60 70 79 87 94 102 109 115 122 128 134 140 146 150 150 150 150 150
III (f) 11.44 8.17 6.74 5.89 5.32 4.90 4.57 4.31 4.09 3.91 3.75 3.62 3.50 3.39 3.30 3.17 2.98 2.82 2.67 2.53
68 97 120 139 157 174 189 204 217 231 244 257 269 280 292 300 300 300 300 300
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.
5.
Load-span tables
KS1000 AWP
1,000 mm – cover width
Wallpanel KS1000 AWP 120 E/I 0.6 / 0.4 – according to EN 14509
The span widths are calculated according to the proof procedures given in EN 14509. All loads are regarded as characteristic loads. Element dead loads have been
5.52
considered in the span calculations. Possible errors and omissions excepted. Please consider, that this table does not replace a verifiable structural design.
5.53
KS1000 X-DEK d
D
Roofpanel KS1000 XD TR20/TR27
335 mm 333 mm 332 mm
1,000 mm
Load-span tables
Upwards 9.91 6.82 5.00 3.80 4.98 3.82 3.01 2.35 1.88
Double Span
Downwards 9.99 7.05 5.20 3.98 3.19 2.45 1.93 1.55 1.27
ULS
Upwards 14.87 10.23 7.50 5.70 3.11 2.75 2.46 2.16 1.92
XD 100
Downwards 6.66 4.70 3.47 2.65 5.47 3.91 2.90 2.40 2.02
SLS
Upwards 9.91 6.82 5.00 3.80 4.66 3.70 3.01 2.38 1.92
Remarks: ULS – Ultimate Limit State – indicated loads should be compared with factored (design) loads, SLS – Serviceability Limit State – indicated loads should be compared with
characteristic(un-factored) loads. Maximum permissible deflection limit (SLS): L / 200.
The minimum width of supports: For the span < 4.00 meters: For SINGLE SPAN at ends – 50 mm, For DOUBLE SPAN at ends – 90 mm, intermediate 160 mm
For the span ≥ 4.00 meters: For SINGLE SPAN at ends – 40 mm, For DOUBLE SPAN at ends – 40 mm, intermediate 120 mm
The dead load of panels is included in the above figures
5.
5.
Load-span tables
KS1000 X-DEK d
D
Roofpanel KS1000 XD TR20/TR27
335 mm 333 mm 332 mm
1,000 mm
Remarks: ULS – Ultimate Limit State – indicated loads should be compared with factored (design) loads, SLS – Serviceability Limit State – indicated loads should be compared with
characteristic(un-factored) loads. Maximum permissible deflection limit (SLS): L / 200.
The minimum width of supports: For the span < 4.00 meters: For SINGLE SPAN at ends – 50 mm, For DOUBLE SPAN at ends – 90 mm, intermediate 160 mm
5.54
For the span ≥ 4.00 meters: For SINGLE SPAN at ends – 40 mm, For DOUBLE SPAN at ends – 40 mm, intermediate 120 mm
The dead load of panels is included in the above figures
5.55
KS1000 X-DEK d
D
Roofpanel KS1000 XD –
ext. Steel 0.70 mm (Minibox-profiled) / int. Steel 0.9 mm 335 mm 333 mm 332 mm
1,000 mm
Load-span tables
Upwards 23.38 14.45 10.17 7.72 6.15 5.06 4.26 3.65 3.16 2.76 2.44 2.18 1.95
XD 100
amin [mm] 144 120 108 97 88 80 77 73 69 63 58 55 52
bmin [mm] 288 240 216 193 177 160 155 146 139 126 117 110 104
Remarks: The above values of loads are characteristic. For Each value individual and combined load cases with appropriate load factors and temperatures have been considered.
For Intermediate values linear interpolation may be used. Values have been calculated using the limit state method according to EN 14509, taking imposed loads and temperature into account.
Maximum permissible deflection limit: downwards and upwards – L / 200
amin – the minimum width of end supports, bmin – the minimum width of intermediate supports
The dead load of panels is included in the above figures
5.
5.
Load-span tables
KS1000 X-DEK d
D
Roofpanel KS1000 XD –
ext. Steel 0.70 mm (Minibox-profiled) / int. Steel 1.1 mm 335 mm 333 mm 332 mm
1,000 mm
Remarks: The above values of loads are characteristic. For Each value individual and combined load cases with appropriate load factors and temperatures have been considered.
For Intermediate values linear interpolation may be used. Values have been calculated using the limit state method according to EN 14509, taking imposed loads and temperature into account.
Maximum permissible deflection limit: downwards and upwards – L / 200
5.56
amin – the minimum width of end supports, bmin – the minimum width of intermediate supports
The dead load of panels is included in the above figures