You are on page 1of 1

1) The figure 1a shows ground level key plan (architectural) for a school block.

Figure 1b shows the


stage for the assembly area. You are required to calculate the amount of the tension rebar required
for the 6m beam which will also its size and location to be proposed by you. The imposed loads shall
be based on the attached BS6399. The design procedure shall be based on the attached
BS8110:1997.

2) Figure 2a shows the drainage layout of a school in Nanga Merit, Kapit. Given the area is less than
88ha, you are to advise your colleague on the design parameters required to check the adequacy of
the drainage system.

The parameters required are:-

a) Design Storm ARI


b) Manning’s N
c) Runoff Coefficient
d) Horton’s N Value
e) Method of peak discharge calculation

3) Please state the single most important element in road design which affects the comfort and
safety of its users.

You might also like