Professional Documents
Culture Documents
Harry Harshaw
Meeting Place: Hope Center Wood stock Georgia
Meeting time: 6:00pm to 2:00am
Hours of meeting: 5 and ½
Goal:
1. Place the SMC SMC7004FW on the Network
2. Configure the router
Notes:
Today we arrived at the Hope Center ready to install the new SMC7004FW Router.
SMC SMC7004FW
Barricade Plus Cable/DSL Broadband Router with VPN
WAN SIDE
WAN IP
208.57.219.54
WAN Gateway
208.57.219.1
Sub-net
255.255.255.192
DNS Servers
Primary 208.57.0.10
Secondary 208.57.0.113
Address Scheme
Total Available Usable IP addresses on network (253) 192.168.1.1 – 192.168.1.254
The router seemed to go on the Network without a problem but after further
investigation, there was a problem. The router was denying access to computers after
about six attempts to access the WAN the router would seem to bottleneck the network
and not allow web pages to come up.
At the same time, all of the router troubleshooting was happening there was
simultaneous work being done on the network upgrading the final two machines to
Windows XP. These two machines upgrades went on and came up on the network with
not to many issues the same problems happened with these as all the others.
The printer drivers where not compatible with windows XP this problem was
easily solved with going to the printer vendors web site and down loading the XP driver
and loading it.
The Anti- virus software associated with each PC was Norton/Systematic 2001.
This is not compatible with Windows XP either so each machine needed
Norton/Systematic 2003 Enterprise edition; the hope center is licensed for it and currently
has it on hand.
Overall, it was a productive night the network problem was solved and we could
move on with setting up the network with Shares and the actual IP Address scheme.