N.T.196/E
FUEL SPECIFICATIONS ABC BIO-FUEL
Requirements for Bio-Fuel for ABC Diesel Engines Page A/A
in| Max Test | Toanalyzo
Density @ 15°C igi 250 | _900 150 12185 yes
Kinematic viscosity @ 40°C cSt 2 380 150 3104 yes
Kinematic viscosity @ 00°C ost 2 380 150 3104 yes
Kinematic viscosity @ 110°C cSt 2 380 150 3104 yes
Kinematic injection viscosity cSt 8 14 180 3104 ne
CeAl 340 150 8217 no
Cetane number - 2 - 1P 498 ves
Lower heating value kutka 3200 | 43000 | pin s1900.2 | yes
Flash point *c 100 5 1502719 ves
Carbon residue % mim - 03 150 10870 ves
Wiator content mim 0,05 | 180 12037 yes
Ash content smi 5 0001 150 6245 ves
Sediment content % mim - 0,05 150.3735 ves
Sulphur content %mim 0,08 EN 20864 ves
‘Acid number mgKOHg | - 2 EN 14104 yes
Calcium mgikg - 10 EN 14528 yes
Seal = Potassium NL maka 20 EN 14638 yes
Callum + Magnesium marke - 5 EN 14538 yes
Phosfor maka 5 eNtto7” | _yes
* analysis method EN 14107 is vary pracise but only for low P-contents (P < 20 mg/kg)
Polymer % - 2 GPC ves
lodine value avodioog | - 130 EN aI yes
Oxidation stabilly @ 110°C h 8 ; EN 18112 ves
Total contamination maikg - - EN 12662 ves
Vanadium maka 30 _| DINS13002 | yes
Silicium moka 5 10 | omata902 | yes
Sodium (NL: Natrium) mika - | sooty | pin siaae2 | yes
Aluminium maka 10 | OINSTI082 | ves
Copper mokg 10| DINST3002 | yes
iron maikg - 10 | vivstz02 | yes
‘We reserve the right to make changes on this specification in accordance with long-term experience
during engine operation.
Following this bio-fuel specification will help to avoid danger, reduce repair costs and downtimes,
increase reliability and prolong the life of your ABC engine.