Professional Documents
Culture Documents
RE 22280
Edition: 2013-06
Type WMR, WMRZ, WMU, WMM and WMD(A) Replaces: 04.10
▶▶ Size 6
▶▶ Component series 5X; 6X
▶▶ Maximum operating pressure 315 [4569 psi]
▶▶ Maximum flow 60 l/min [15.8 US gpm]
H7114
Features Contents
Ordering code
01 02 03 04 05 06 07 08 09 10 11 12 13
6 / / *
01 3 main ports 3
4 main ports 4
Type of actuation
02 Roller plunger (see page 12) WMR
Roller plunger (see page 12) WMRZ
Roller plunger (see page 12) WMU
Hand lever WMM
Rotary knob WMD
Lockable rotary knob 1) WMDA
03 Size 6 6
04 Symbols e.g. C, E, EA, EB, etc; possible version see pages 4 and 5
Corrosion protection
07 Standard corrosion protection no code
Improved corrosion protection 2) J
Ordering code
01 02 03 04 05 06 07 08 09 10 11 12 13
6 / / *
Clamping length
10 42 mm [1.65 inch] (standard) no code
22 mm [0.87 inch] (only version "WMRZ") Z
Seal material
11 NBR seals no code
FKM seals V
Attention: Observe compatibility of seals with hydraulic fluid used! (Other seals upon request)
Symbols
A B A B A B A B
a b a b a b a b
P T P T P T P T
=A = B 2)
=C = Y 2)
=D
1) Example:
Symbol E with spool position "a" → ordering code ..EA..
Symbol E with spool position "a" → ordering code ..EB..
2) Only version "WMR", "WMU" and "WMM"
A B A B 3) Symbol E1-: P → A/B pre-opening
a 0 a 0 = .A 1) Caution in conjunction with differential cylinders due to
pressure intensification!
P T P T
A B A B
Notice!
0 b 0 b = .B 1) Representation according to DIN ISO 1219-1.
P T P T Hydraulic interim positions are shown by dashes.
A B A B
a 0 b a 0 b
P T P T
= E 1)
=P
= E1- 3)
=F =Q
=G =R
=H =T
=J =U
=L =V
=M =W
Types of actuation
../F.. a b a b
A, P T P T
C,
D A B A B A B
a b a b a b
P T P T P T
A B A B A B
a b a b a b
P T P T P T
B,
Y A B
../F.. a b
P T
A B A B
../F.. a 0 a 0
P T P T
"a" 1)
= .A A B A B A B
a 0 a 0 a 0
P T P T P T
A B A B
E1–,
E, ../F.. 0 b 0 b
F,
P T P T
G, H, "b" 1)
J, = .B A B A B A B
L
M, 0 b 0 b 0 b
P,
P T P T P T
Q, R,
T,
A B A B
U,
V, ../F.. a 0 b a 0 b
W
P T P T
A B
a 0 b
P T
A B
a 0 b
P T
Function, section
2 1 3 4
P
Type 4WM. 6 ..5X/..B..
A T B
Type 4WMM 6 D5X/F (P)
2 1 3 4
A T B
Type 4WMDA 6 E5X/F (P)
Technical data
(for applications outside these parameters, please consult us!)
general
Weight kg [lbs] Approx. 1.4 [3.1]
Installation position Any
Ambient temperature range °C [°F] –20 … +80 [–4 … +176] (NBR seals)
–20 … +80 [–4 … +176] (FKM seals)
hydraulic
Maximum operating pressure – Port A, B, P bar [psi] 315 [4569]
– Port T: With symbols A or B, port T must be used as leak-
"WMM", "WMD", "WMDA" bar [psi] 160 [2320] age oil connection if the operating pressure ex-
ceeds the permissible tank pressure.
"WMR", "WMRZ", "WMU" bar [psi] 60 [900]
Maximum flow l/min [US gpm] 60 [15.8]
Flow cross-section – Symbol Q mm2 Approx. 6% of nominal cross-section
(spool position 0) – Symbol W mm2 Approx. 3% of nominal cross-section
Hydraulic fluid See table below
Hydraulic fluid temperature range °C [°F] –30 … +80 [–22 … +176] (NBR seals)
–20 … +80 [–4 … +176] (FKM seals)
Viscosity range mm2/s [SUS] 2.8 … 500 [35 … 2320]
Maximum admissible degree of contamination of the hydraulic Class 20/18/15 1)
Actuating force/torque
Design
"WMR", "WMU" "WMM" "WMD" "WMRZ"
Operating pressure – Port A, B, P bar [psi] 100 200 315 315
[1450] [2900] [4600] [4600]
Actuating force at the – Without tank pressure N [lbs] 100 [22.5] 112 [25.2] 121 [27.2] 30 [6.7]
roller plunger – With tank pressure N [lbs] 184 [41.4] 196 [44.1] 205 [46.1] 160 [36]
(Tank pressure pT max) bar [psi] 60 bar [900 psi] – corresponds to 1.4 N 210 [47.2]
[0.022 lbs] per bar [psi] of tank pressure
Maximum actuating torque Ncm [lb-in] – 150 [13.3]
Actuating force – Without tank pressure, N [lbs] 20 [4.5] –
with/without detent
– At a tank pressure of N [lbs] 30 [6.7] –
150 bar [2175 psi]
Calculation formula for the actuating force (FR) at the roller plunger
in case of tank pressure: FR = Fwithout tank pressure + pT x 1.4 N/bar
Characteristic curves
(measured with HLP46, ϑoil = 40 ± 5 °C [104 ± 9 °F])
[160] 7 8 10 6
11
Symbols Direction of flow
10 5
[140] P–A P–B A–T B–T
3
→
A 3 3 – –
9
Pressure differential in bar [psi]
[120]
8 B 3 3 – –
1
C 1 1 3 1
[100] 2
D 5 5 3 3
6 4 E 3 3 1 1
[80]
F 1 3 1 1
[60] 4 G 6 6 9 9
H 2 4 2 2
[40] J 1 1 2 1
2 L 3 3 4 9
[20]
M 2 4 3 3
P 3 1 1 1
[0]
0 10 20 30 40 50 60 Q 1 1 2 1
R 5 5 4 –
[0] [2] [4] [6] [8] [10] [12] [14] T 10 10 9 9
U 3 3 9 4
Flow in l/min [US gpm] → V 1 2 1 1
W 1 1 2 2
Y 5 5 3 3
7 Symbol "R" in spool position "b" (A → B)
8 Symbols "G" and "T" in central position (P → T)
Performance limits
(measured with HLP46, ϑoil = 40 ± 5 °C [104 ± 9 °F])
Notice! Due to the flow forces acting within the valves, the per-
The specified switching power limits are valid for opera- missible switching power limit may be considerably
tion with two directions of flow (e.g. from P to A and lower with only one direction of flow (e.g. from P to A
simultaneous return flow from B to T). while port B is blocked)!
In such cases, please consult us!
300
[4000] 2 curve
Operating pressure in bar [psi]
5 1 A, B
7 4 2 C, D, Y, E, E1–, H, M,
[3000] 6
200 Q, U, W
8 1 3 F, P
[2000] 4 G
3 5 J, L
100
6 R
[1000]
8 V
7 T
[0]
0 10 20 30 40 50 60
300
curve
[4000] 1
Operating pressure in bar [psi]
2
1 E, E1–, M, J, L, Q, U,
4 W, C, D, Y, G, H, R
[3000]
200 2 A, B
5 3 V
[2000]
3 4 F, P
100 5 T
[1000]
[0]
0 10 20 30 40 50 60
Performance limits
(measured with HLP46, ϑoil = 40 ± 5 °C [104 ± 9 °F])
Characteristic Symbol
300
Operating pressure in bar [psi]
[4000] 5 1 curve
2 3
1 E1–, M, H, C, D, Y
8 4 2 E, J, Q, L, U, W
[3000]
200
3 A, B
6 4 G, T
[2000]
9 7 5 F
100
3, 5 6 V
[1000]
7 P
8 R
[0]
0 10 20 30 40 50 60 9 T
Characteristic Symbol
300
[4000] 1 2 curve
Operating pressure in bar [psi]
1 E, E1–, M, H, C, D, Y,
4 7 Q, U, W
[3000]
200 2 J, L
5
8 3 3 A, B
[2000]
6 4 G, P
100 5 F
[1000] 4, 5
6 V
7 R
[0]
8 T
0 10 20 30 40 50 60
Dimensions
(dimensions in mm [inch])
90
90
9 b a
1) b → a / 0 → a: Clockwise rotation by 90°
Version "WMDA"
b A, C, D
B, Y
a
a
1 55 [2.2]
147 [5.8]
b 5
0 .. A .. Ø9,4 [ 0.37]
53 [2.09]
a 30 [1.2]
.. B .. 0 Ø5,3 [ 0.209] 2 [0.08]
b
7 a 0 b
51 [2.008]
Ø43 [ 1.69]
47 [1.85]
42 [1.654]
30,8
23
,5 [0.256] [0.91]
[1.21]
11 [0.433] 2 0,01/100
[0.0004/4.0]
1 2
T Rzmax 4
52,9 [2.08]
A B
45 [1.77]
4 P 3 contact surface
4 [2.51]
2 Porting pattern according to DIN 24340 form A (without 7 Spool position "a"
locating hole), ISO 4401-03-02-0-05 and 8 Spool position "b"
NFPA T3.5.1 R2-2002 D03 (with locating hole for locking pin
9 Spool position "0", "a" and "b" (a and b for valves with
ISO 8752-3x8-St, material no. R900005694, separate order)
2 spool positions)
3 Identical seal rings for ports A, B, P and T
Version "WMD", "WMDA"
5 Valve with 2 spool positions
10 Spool position "a"
6 Valve with 3 spool positions
11 Spool position "0" and "b" (b for valves with 2 spool positions)
12 Spool position "b"
13 Switching angle 90° right and 90° left (for valves with 3
spool positions)
Dimensions
(dimensions in mm [inch])
14 1 [0.039]
74,3 [2.92] 2,8 [0.11] 2,8 [0.11]
57 [2.24] 74,3 [2.92] 5 b a 10
6 b 0 a
6 [0.236]
11
12
Ø16 [ 0.63]
2,8 [0.11] 2,8 [0.11] max. 30
Version "WMRZ"
16 0 15 1
[ 0.79] 20 9,4 [ 0.37] 1 Name plate
9+1 [0.53+0.039] 5,3 [ 0.209] 2 Porting pattern according to DIN 24340
form A (without locating hole),
ISO 4401-03-02-0-05 and
NFPA T3.5.1 R2-2002 D03 (with
locating hole for locking pin
60,5 [2.38]
[0.91]
P and T
4 Alternative clamping length (): 22 mm
[1.654] ([0.866])
F4 F3 working stroke
15 Spool position "a" or "b"
13,6 [0.535]
16 Spool position "0"
69,2 [2.45]
17 Actuation on side B (depending on
the piston)
Dimensions
Subplates according to data sheet 45052 (separate order) Valve mounting screws (separate order)
(without locating hole) G 341/01 (G1/4) ▶▶ Clamping length 42 mm:
G 342/01 (G3/8) 4 metric hexagon socket head cap screws
G 502/01 (G1/2) ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
(with locating hole) G 341/60 (G1/4) (friction coefficient µges = 0.09 to 0.14);
G 342/60 (G3/8) tightening torque MA = 7 Nm [5.2 ft-lbs] ± 10%,
G 502/60 (G1/2) material no. R913000064
G 341/12 (SAE-6) 1) or
G 342/12 (SAE-8) 1) 4 hexagon socket head cap screws
G 502/12 (SAE-10) 1) ISO 4762 - M5 x 50 - 10.9 (not part of Rexroth delivery range)
1) Upon request (friction coefficient µtotal = 0.12 to 0.17);
tightening torque MA = 8.1 Nm [6 ft-lbs] ± 10%
More information
Bosch Rexroth AG © This document, as well as the data, specifications and other information set
Hydraulics forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No statements
Phone +49 (0) 93 52 / 18-0 concerning a certain condition or suitability for a certain application can be
documentation@boschrexroth.de derived from our information. The information given does not release the user
www.boschrexroth.de from the obligation of own judgment and verification. It must be remembered
that our products are subject to a natural process of wear and aging.
Notes
Bosch Rexroth AG © This document, as well as the data, specifications and other information set
Hydraulics forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No statements
Phone +49 (0) 93 52 / 18-0 concerning a certain condition or suitability for a certain application can be
documentation@boschrexroth.de derived from our information. The information given does not release the user
www.boschrexroth.de from the obligation of own judgment and verification. It must be remembered
that our products are subject to a natural process of wear and aging.
Notes