Professional Documents
Culture Documents
Southeast University
Department Of Textile Engineering
I/A 251,252 Tejgaon Dhaka Bangladesh
Squeezing machine is used for extracting water from dyed fabric by
squeezing through rollers having different pressure. Squeezer machine
designed to extract water from piece goods treated in rope form. They
are used as an intermediate devices such as washers or autonomous
devices. In the latter case they are usually full-width squeezers. The
first padder rollers gives proper squeeze to the fabric and extracts the
water and the second squeeze roller passes the fabric half the speed
of the first squeeze roller which causes the softener chemicals to
properly pass into the fabric.
After dyeing process from the dyeing machine then the fabrics arc ready for
dc-watering. This is the process to remove the water from the fabric
partially by squeezing. This is the main function of the squeezing machine.
But here also control the some important factor of the fabric quality.
• To remove the water from the fabric.
• To control the width of the fabric.
• To control the length of the fabric.
• To control the spirality of the fabric.
• To control the over feeding system.
• To increase the softness of the fabric.
• To remove the crease mark of the fabric.
• To reduce fabric surface water content.
• Squeezing the fabric for proper softening chemical penetration.
• Applying softening chemicals to the fabric.
Turntable (Basket)
Detwister
Feed R/R
Dancing R/r
Water Pander
Ballon former
Dancin roller
Softener padder
Ballon Former
Padding squeezer
Main squeezer
Conveyors Blanket
Paliter
Delivery basket
Schematic Diagram of a squeezer machine
• Polyreference or Centering roller.
• Bello.
• Bello Alarm.
• Chemical Tank.
• Tension roller
• Squeezing roller.
• Guide Belt.
• Guide Roller.
Machine specification:
Brand name: CORINO MACCHINE
Type/model no:
Company: Italy
Year: 2005
No of motor: 08
1. Used to remove excess water after pretreatment and dyeing
2. To slit the tube fabric by the knife for opening of the fabric and ready
for stentering
3. Delivered fabric is crease free state
4. Before squeezing balloon is formed with the help of compressed air
passing by a nozzle or air sprayer
5. It can control the diameter of fabric and GSM and shrinkage by over
feeding mechanism
6. To impart soft finish to the fabric by using required softener.
1. Squeeze roller (to remove water)
6. Squeezing roller
Power consumption:
Voltage: 400V
Frequency: 50Hz
Maximum power: 24kwatt
Manpower Required:
Worker: 02
Production:
Capacity: 10 tones/shift
Actual production: 7 tones/shift.
Utility:
1. Water
2. Electricity
3. Compressed air or Processed air
(to form the tube fabric into ballon with a view to remove
crease)
Bar PSI Kg Lbs
1 14.5 90 200
2 29 205 450
3 43.5 315 700
4 58 425 940
5 72.5 540 1200
6 87 650 1440
Fabric Type Pad pressure Speed Over Feed
S/J 2.5 – 3 40 -50 40
PK 3 40 -50 40
1x1 Rib 3 -3.5 50 -60 25
2x2 Rib 3 – 3.5 60 40
P/I 3 – 3.5
Mer S/J 2 40 40
Mer PK 2.5 40 40
Mer 1x1 Rib 2.5 – 3 50 25
Mer 2x2 Rib 2.5 – 3 60 40
Mer P/I 2.5
Mar = Mercerization
1. Diameter setting must be accurate.
5. Overfeed.
Find out the limitations and faults of the machine and
advise for removing these.
1) Workers does not record the pressure, in dia and out dia of
different fabric in record book
4. Fashion-Design-and-Technology
Link:http://www.facebook.com/pages/Fashion-Design-and-
Technology/587655294583875?ref=ts&fref=ts