Professional Documents
Culture Documents
3.375
17.2615
13.3285
3.496
1.63875
11.799
3 16 603.4286
2 12 226.2857
5 12 565.7143
7 12 792
2 20 628.5714
1.000
16 201.1429
13 3 4.0386
DESIGN OF ONE WAY SLAB:-
Design Parametres:-
Unit weight of RCC = 25KN/cum
Concrete mix : M25
Steel : Fe500
Cover to Reinforcement : 20mm
Characteristic compressive strength of concrete = 25N/sqmm
Yield strength of steel = 500N/sqmm
Item Slab panel Description
S5
10 12 1131.429
6 12 678.8571
2 20 628.5714
1 25 491.0714
2 16 402.2857
4 16 804.5714
8 12 905.1429
6 16 1206.857
15 12 1697.143
DESIGN OF COMBINED FOOTING(CF1)
Design Parametres:-
Due to length restriction,trapezoidal combined footing is proposed with centroid located at a distance
of 3.39m from C1.
5394
2010
C1 C2
2133
C1 C2
2133
A)DESIGN OF BEAM:-
206.63KN/m
Design beam of width 0.45m and thickness and depth being 0.70m for the above forces
= 459.56mm
However assume 700mm overall depth,then the effective depth comes to 594.00mm
The critical section of one way shear is at a distance of 'd' from the face of the column
The design shear strength of concrete for the above steel percentage from
Table 19 of IS 456 is
0.565 N/sqmm Hence Vuc = 335.61KN
0.565 >0.609
Vus/d = 0.44
Using 8mm dia two legged vertical stirrups,from table 62 of SP 16,the spacing required is 45
However,from safety point of view,provide 10mm dia 2 legged stirrups @ 150mm c/c
= 85.65mm
The critical section of one way shear is at a distance of 'd' from the face of the column
The design shear strength of concrete for the above steel percentage from
Table 19 of IS 456 is
0.381 N/sqmm Hence Vuc = 0.00KN
0.381 >0.322
3 25 1473.214
3 25 1473.214
5 12 565.7143
6 16 1206.857
1 12 113.1429
10.84194
81.57
10.8344979772
-2.8
8.0344979772 59.1642
1.852214
1115.802 16.875
7 25 3437.5
7 10 550
4 16 804.5714
1.4 1.626107 3.33 883.2844 353.3138
63.40716