Professional Documents
Culture Documents
The power supply uses a transformer 12V/250mA to regulate the voltage at 12 volts
using a IC 7812T (any prefix). If using on a project that already has amplifier and a
power supply, you can omit the transformer, diodes and replace by the 4700μF
capacitor by a 470 or 1000μF . The LED used to indicate the active state of the circuit
can also be omitted if you prefer.
S1 in the connector is to be connected to key loudness, and works well with the key
turned to the R2 circuit is disabled, if you want to use this feature, simply connect a
jumper in place so that the resistor R2 (2.2K) stay connected to the circuit.
List of components for assembly circuit TDA1524A tone control with Bass and
Treble
Parts Value
Resistor’s 1/4 Watt 5%
Capacitors
C2, C4, C5, C6, C7, C8, C20 100nF – Polyester Capacitor
Semiconductors
Miscellaneous
Download PDF files for this project: PCB, Silk, Layout, Layout components, Datasheet
TDA1524A, TDA1524A Eagle Library.