Professional Documents
Culture Documents
Description high activity selfpolishing antifouling for extreme and aggressive fouling
conditions
PRINCIPAL CHARACTERISTICS – TBT-free selfpolishing antifouling for maintenance and repair market
– specifically designed for coastal and low activity vessels
– controls shell and weed fouling for service periods up to 60 months,
depending on vessel type, operation characteristics and system applied
– controlled polishing rate to give effective protection in accordance with the
specified film thickness
– complies with IMO Antifouling Systems Convention
BASIC DATA AT 20 °C (1 g/cm³ = 8.35 lb/US gal; 1 m²/l = 40.7 ft²/US gal)
Mass density 1.9 g/cm³
Volume solids 70% ± 2%
VOC (Directive 1999/13/EC, SED) max. 141 g/kg (Directive 1999/13/EC, SED)
VOC (UK PG 6/23(92) appendix 3) max. 267 g/l (approx. 2.2 lb/gal)
Recommended dry film thickness 75 - 210 μm depending on system
Theoretical spreading rate 9.3 m²/l for 75 μm
7.0 m²/l for 100 μm
4.7 m²/l for 150 μm
3.5 m²/l for 200 μm
Touch dry after 1 hour at 20 °C
AIRLESS SPRAY
Recommended thinner Thinner 21-06
Volume of thinner 0 - 3%, depending on required thickness and application conditions
Nozzle orifice approx. 0.53 - 0.68 mm (= 0.021 - 0.027 in)
Nozzle pressure 12 - 15 MPa (= approx. 120 - 150 bar; 1740 - 2176 p.s.i.)
page 1/3
SIGMA ECOFLEET 690
November 2012
Overcoating table for Sigma EcoFleet 690 with itself for dft up to 150 μm
Worldwide availability Whilst it is always the aim of Sigma Coatings to supply the same product on a
worldwide basis, slight modification of the product is sometimes necessary to
comply with local or national rules/circumstances.
Under these circumstances an alternative product data sheet is used.
SAFETY PRECAUTIONS – for paint and recommended thinners see safety sheets 1430, 1431 and
relevant material safety data sheets
– this is a solvent borne paint and care should be taken to avoid inhalation of
spray mist or vapour as well as contact between the wet paint and exposed
skin or eyes
page 2/3