Professional Documents
Culture Documents
Alarm Master
CIMPLICITY®
CIMPLICITY® 90-ADS
CIMPLICITY® PowerTRAC
CIMSTAR
CONTROL 90
Field Control™
GEnet
Genius®
Genius® Power TRAC
Helpmate
Logicmaster
Modelmaster
Motion Mate
PowerMotion
PROCESS 90
ProLoop
PROMACRO
Series One
Series Three
Series Five
Series Six
Series 90™
VuMaster
VersaMax®
VersaPoint®
VersaPro
Workmaster
SS-90
* - New Item
# - Ask for Availability
M - Mature Product - Orderable Minimum of 2 Years from Effective Date Listed Next to Code as: MMYY
D - Discontinued Product - from Effective Date Listed Next to Code as: MMYY
Products listed in the Automation Equipment and Factory IT Price List (GFPE-060-xxx-x) comply with CE regulations. CE approval pending
for certain models, contact GE Fanuc for details or refer to Declaration of Conformity.
TABLE OF CONTENTS
Page
TABLE OF CONTENTS
Page
SERIES 90-30 BASES (USE WITH CPU331 and higher).......................................................................................... 15
SERIES 90-30 POWER SUPPLIES........................................................................................................................... 16
SERIES 90-30 DISCRETE INPUT MODULES........................................................................................................... 16
SERIES 90-30 DISCRETE OUTPUT MODULES....................................................................................................... 17
SERIES 90-30 MIXED I/O MODULES........................................................................................................................ 17
SERIES 90-30 ANALOG INPUT MODULES.............................................................................................................. 18
SERIES 90-30 ANALOG OUTPUT MODULES.......................................................................................................... 18
SERIES 90-30 SPECIAL FUNCTION MODULES...................................................................................................... 19
SERIES 90-30 COPROCESSOR MODULES............................................................................................................ 19
SERIES 90-30 MOTION MODULES.......................................................................................................................... 20
SERIES 90-30 SERIAL COMMUNICATION MODULES............................................................................................ 20
SERIES 90-30 GENIUS COMMUNICATION MODULES........................................................................................... 21
SERIES 90-30 PROFIBUS COMMUNICATION MODULES...................................................................................... 21
SERIES 90-30 ETHERNET COMMUNICATION MODULES..................................................................................... 21
SERIES 90-30 I/O INTERFACE AND OTHER FIELDBUS MODULES...................................................................... 21
SERIES 90-30 CABLES............................................................................................................................................. 22
SERIES 90-30 ACCESSORIES.................................................................................................................................. 23
SERIES 90-30 UPGRADE KITS................................................................................................................................. 24
SERIES 90-30 PRODUCTS WITH LOW TEMPERATURE TESTING....................................................................... 25
PROGRAMMING SOFTWARE FOR SERIES 90-30.................................................................................................. 26
PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES.............................................................................. 27
PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGES........................................................................... 27
PROGRAMMING SOFTWARE DEMO PACKAGES.................................................................................................. 27
PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 27
PROGRAMMING SOFTWARE UPGRADE SERVICE & TECHNICAL SUPPORT (SAFE)....................................... 27
PROGRAMMING SOFTWARE STATE LOGIC.......................................................................................................... 28
PROGRAMMING SOFTWARE LEGACY PRODUCTS............................................................................................. 28
SERIES 90-30 C TOOLKITS...................................................................................................................................... 28
SERIES 90-30 HOST COMMUNICATION TOOLKITS.............................................................................................. 29
SERIES 90-30 OTHER SOFTWARE.......................................................................................................................... 29
CRITICAL CONTROL................................................................................................................................................. 30
SERIES 90-30 DOCUMENTATION............................................................................................................................ 30
TABLE OF CONTENTS
Page
PROGRAMMING SOFTWARE FOR SERIES 90-70.................................................................................................. 37
PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES.............................................................................. 37
PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGES......................................................................... 38
PROGRAMMING SOFTWARE DEMO PACKAGES.................................................................................................. 38
PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 38
PROGRAMMING SOFTWARE UPGRADE SERVICE & PRODUCT SUPPORT (SAFE)......................................... 38
PROGRAMMING SOFTWARE LEGACY PRODUCTS.............................................................................................. 38
SERIES 90-70 GMR PROGRAMMING SOFTWARE................................................................................................. 38
SERIES 90-70 C TOOLKITS...................................................................................................................................... 39
SERIES 90-70 HOST COMMUNICATION TOOLKITS.............................................................................................. 40
SERIES 90-70 OTHER SOFTWARE.......................................................................................................................... 40
SERIES 90-70 DOCUMENTATION............................................................................................................................ 41
TABLE OF CONTENTS
Page
FIELD CONTROL ANALOG INPUT MODULES......................................................................................................... 51
FIELD CONTROL ANALOG OUTPUT MODULES.................................................................................................... 51
ACCESSORIES.......................................................................................................................................................... 51
TABLE OF CONTENTS
Page
VERSAMAX DATAPANEL.......................................................................................................................................... 64
DATAPANEL 100 SERIES......................................................................................................................................... 64
DATAPANEL 200 SERIES......................................................................................................................................... 64
DATAPANEL CABLES............................................................................................................................................... 65
DATAPANEL CONFIGURATION SOFTWARE.......................................................................................................... 65
CONNECTIVITY......................................................................................................................................................... 66
VT 100 DATAPANEL.................................................................................................................................................. 66
DATAPANEL ACCESSORIES.................................................................................................................................... 66
DATAPANEL FUNCTIONAL UPGRADES................................................................................................................. 66
DATAPANEL DOCUMENTATION.............................................................................................................................. 67
MOTION CONTROLLERS
MOTION MATE DSM300 MOTION CONTROLLER.................................................................................................. 73
MOTION MATE APM300 MOTION CONTROLLERS................................................................................................ 74
STEPPER MOTION CONTROLLERS........................................................................................................................ 74
HIGH SPEED COUNTER AND I/O PROCESSOR..................................................................................................... 74
OCS MOTION (STEPPER)......................................................................................................................................... 74
MANUALS.................................................................................................................................................................. 75
TABLE OF CONTENTS
Page
ACCESSORIES.......................................................................................................................................................... 82
TRANSFORMERS AND LINE FILTERS.................................................................................................................... 82
MANUALS.................................................................................................................................................................. 83
TABLE OF CONTENTS
Page
BASE SYSTEM SERVERS DEVELOPMENT & RUNTIME....................................................................................... 101
BASE SYSTEM SERVERS RUNTIME ONLY............................................................................................................ 101
VIEWER NODES........................................................................................................................................................ 102
PRO SERVERS DEVELOPMENT & RUNTIME......................................................................................................... 102
PRO SERVERS RUNTIME ONLY.............................................................................................................................. 102
ADDITIONAL COMMUNICATION PROTOCOLS...................................................................................................... 103
CIMPLICITY® OPC Servers....................................................................................................................................... 104
PRODUCT OPTIONS................................................................................................................................................. 105
CIMPLICITY® SQL..................................................................................................................................................... 106
CIMPLICITY® TRACKER........................................................................................................................................... 106
UPGRADES - FUNCTIONAL...................................................................................................................................... 107
UPGRADES - SOFTWARE VERSION....................................................................................................................... 107
SAFE AND RENEWALS............................................................................................................................................. 107
DEMONSTRATION CD PACKS................................................................................................................................. 108
TECHNICAL DOCUMENTATION
TECHNICAL DOCUMENTATION............................................................................................................................... 119
TABLE OF CONTENTS
Page
VERSAMAX NANO
The VersaMax Nano Controller has a RS-232 port (RJ45) that can be used for SNP/SNPX Slave, Modbus RTU Slave and
Serial In/Out communication. With Serial I/O commands devices such as pagers, intelligent scales, bar code readers and
printers as well as modems can easily be connected to the serial port. The VersaMax Nano is not expandable.
Note: The following manuals are recommended for the VersaMax Nano Controllers:
GFK-1645 VersaMax Nano and VersaMax Micro PLC User's Manual
# IC200NAL211 VersaMax Nano Controller 24 VDC Power Supply, 6 Inputs (24 VDC), 1 Analog 0.412
Input (8Bit), 4 Relay Outputs (2.0 A)
Note: Requires VersaPro 2.03 minimum or CIMPLICITY Logic Developer PLC 3.0 minimum.
VERSAMAX MICRO
The VersaMax Micro Controller is available in 14 or 28 Points as well as 23 Point with Analog. All VersaMax Micro Controllers
are expandable. The 14-Point model has one RS-232 port (RJ-45) that can be used for SNP/SNPX Slave, Modbus RTU Slave
and Serial In/Out communication. The RS-232 port (RJ-45) of the 23 point and 28 point models supports SNP/SNPX Slave
whereas the second port is a RS-485 port (D-Sub) that can be used for SNP/SNPX Master/Slave, Modbus RTU Slave and
Serial In/Out communication. Both ports can be used to download programs. Modems can easily be attached to either port.
With the Serial I/O commands devices such as pagers, intelligent scales, bar code readers and printers can easily be
interfaced to the controller.
A maximum of four expansion units can be connected to the VersaMax Micro controllers providing up to 140 digital I/O points.
Expansion cable (0,1 Meter) is delivered together with each expansion model. The maximum distance between base and last
expansion unit is two meters when using the optional expansion cables (IC200CBL505 or IC200CBL510).
The standard memory retention for the 14-Point Micro is 3 days and for the 23/28-Point Micro is 30 minutes. An optional
battery (IC200ACC403) is available to increase memory retention on the 23/28-Point Micro to 2 months. The battery is not
included with the units.
The following manuals are recommended for the VersaMax Nano and VersaMax Micro controller system:
GFK-1645 VersaMax Nano and VersaMax Micro
Note: The 28-Point Expansions require a VersaMax Micro Controller with Firmware 2.0 or greater as well as Programming
Software either VersaPro 2.03 or greater or CIMPLICITY Logic Developer PLC 3.0 or greater.
Note: The Analog Expansions require a VersaMax Micro Controller with Firmware 2.0 or greater as well as Programming
Software either VersaPro 2.03 or greater or CIMPLICITY Logic Developer PLC 3.0 or greater.
* IC200ACC413 VersaMax Micro Long-life Battery for Data Retention (23 and 28 Point Models only) 0.050
Note: Battery life and back up time varies with temperature. Up to 10 months at 20°C.
IC200ACC404 VersaMax Micro Spare Parts Kit with two Terminal Strips, four Plastic Doors and 0.335
four Covers
IC200ACC415 RS-232 to RS-485 Converter (Requires IC200CBL500 or Equivalent)....................... 0.030
IC200KIT001 Series 90 Micro to VersaMax Micro Conversion Kit: VersaPro (IC640VPS002), 1.940
CAD files, Programming Cable and Manuals
Note: Considered to support the transition from Series 90 Micro to VersaMax Micro.
As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as
Logic Developer PLC, which is fully compatible with existing VersaPro applications. Logic Developer PLC also allows users of
Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and powerful
tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro, Series 90-30
and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and problems that may
have occurred with your system. Programming languages supported are Ladder Diagram (LD) and Instruction List (IL) and C-
Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as View or Motion Developer.
Please refer to the CIMPLICITY Machine Edition section for details.
Hardware support:
-Logic Developer PLC Nano/Micro Edition supports VersaMax Nano/Micro and Series 90 Micro PLC’s.
Please also refer to the CIMPLICITY Machine Edition section to the end of the price list for more ordering information.
IC200CBL500 3,0 Meter Programming Cable (RJ-45 to DB-9 Pin) RS-232....................................... 0.137
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help
Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition remote
troubleshooting. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on
an annual basis. The Technical Support helpdesk is available for 3 callers. Additional callers may be purchased using catalog
# IC648SAF000. Access for the Technical Support Help Desk is 7 AM to 8 PM Eastern Standard Time.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
GFN-037 VersaMax Micro Workshop Student Guide (using VersaPro programming software). TBD
IC200CPUE05 CPU 64K User Progr. 0.8 msec/K Boolean with 10 BaseT Ethernet Interface............ TBD
Note: Requires power supply with expanded 3.3 VDC
VERSAMAX EXPANSION
IC200ERM002 Expansion Receiver, Non-Isolated.............................................................................. 0.225
Note: Expansion receiver module for use in distances less than or equal to 15 meters. Can
be mixed with ERM001. Expansion systems using an ERM001 will operate at a lower
throughput speed.
VERSAMAX CARRIERS
IC200CHS022 Compact I/O Carrier IEC Style.................................................................................... 0.360
IC200CHS002 I/O Carrier IEC Style.................................................................................................... 0.360
IC200CHS025 Compact I/O Carrier Spring Clamp Style..................................................................... 0.354
IC200CHS005 I/O Carrier Spring Clamp Style.................................................................................... 0.354
IC200CHS001 I/O Carrier Barrier Style............................................................................................... 0.373
IC200CHS003 I/O Carrier Connector Style......................................................................................... 0.300
IC200CHS012 I/O Interposing IEC Style............................................................................................. 0.334
IC200CHS014 I/O Interposing IEC Style (Thermocouple Cold Junction Compensation).................... 0.340
IC200CHS015 I/O Interposing Spring Style......................................................................................... 0.600
IC200CHS011 I/O Interposing Barrier Style........................................................................................ 0.310
* IC200CHS101 I/O Interposing Disconnect Terminals......................................................................... TBD
* IC200CHS102 Interposing Disconnect Terminals Expansion............................................................. TBD
Note: Includes ribbon cable to connect to CHS101.
VERSAMAX CABLES
IC200CBL105 Cable, I/O Non-Shielded 2 Connectors 0.5m.............................................................. 0.200
IC200CBL110 Cable, I/O Non-Shielded 2 Connectors 1.0m.............................................................. 0.400
IC200CBL120 Cable, I/O Non-Shielded 2 Connectors 2.0m.............................................................. 0.590
IC200CBL230 Cable, I/O Non-Shielded 1 Connectors 3.0m.............................................................. 0.810
IC200CBL001 Cable, CPU Programming RS-232.............................................................................. 0.150
IC200CBL002 Cable, NIU Configuration/Upgrade.............................................................................. 0.085
Note: Required to upgrade NIU firmware or modules requiring firmware upgrade in a NIU
station.
VERSAMAX ACCESSORIES
IC200ACC003 VersaMax EZ Program Store Device.......................................................................... 0.100
Note: Allows storing of programs to PLC CPU without the need of a computer. Similar to
EEPROM usage on Series 90-30 CPU311. Supports CPU001-CD and above, CPU002,
CPU005 and CPUE05.
As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as
Logic Developer PLC, which is fully compatible with existing VersaPro-based applications. Logic Developer PLC also allows
users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and
powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro,
Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and
problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and
Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as
View or Motion Developer. Please refer to the CIMPLICITY Machine Edition section for details.
Hardware support:
-Logic Developer PLC Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90-30 and
Series 90 Micro PLC’s.
-Logic Developer PLC Configuration Tools provides support for VersaMax Remote I/O.
Please also refer to the CIMPLICITY Machine Edition section to the end of the price list for more ordering information.
* IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable 0.500
and RS485 Mini-Converter
Note: Includes RS-232 to RS-422/485 Miniconverter (DB-9 to DB-15) with DB-9 Serial PC
cable to connect the PLC to the serial port of a PC (2m). (Catalog # HE693SNPCBL)
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
* IC646MPC101 Logic Developer - PLC Configuration Tools with Programming Cable........................ 0.500
Note: The Remote I/O Manager is a stand-alone application used to configure PLC hardware as well as VersaMax Network
Interface Units (NIU). The Remote I/O Manager is included in Logic Developer PLC Standard Edition. It is also available as a
stand-alone product called 'Logic Developer PLC Configuration Tools'. The stand-alone product is recommended to users of
VersaMax NIU’s who do not use GE Fanuc PLC’s.
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
* IC646MPSU11 Logic Developer - PLC Standard Edition, single license, Upgrade from VersaPro 0.500
Standard Edition, Logicmaster 90-30 or Control. (Serial number required, valid
subscription service not required)
Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster
Series 90-30. Please provide serial number.
Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help
Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition remote
troubleshooting. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on
an annual basis. The Technical Support helpdesk is available for 3 callers. Additional callers may be purchased using catalog
# IC648SAF000. Access for the Technical Support Help Desk is 7 AM to 8 PM Eastern Standard Time.
VERSAMAX DOCUMENTATION
GFK-xxxx VersaMax/Series 90-30/20/Micro Manuals (per manual)............................................
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
IC693CPU360 CPU Model 360 Module (240K Bytes configurable User Memory, 0.22 ms/K 0.200
Boolean Execution)
Note: Runs 6 times faster than CPU341.
IC693CPU341 CPU Model 341 Module (80K Bytes User Program, 0.3 ms/K Boolean Execution).... 0.339
Note: Recommended Replacement: CPU360
IC693CPU363 CPU Model 363 Module (240K Bytes configurable User Memory, 0.22 ms/K 0.417
Boolean Execution) w/ two Build In Serial Ports
Note: Backward compatible with CPU351 with the exception of built in port connectors are
totated 180 degress.
IC693CPU351 CPU Model 351 Module (240K Bytes configurable User Memory, 0.22 ms/K 0.317
Boolean Execution) w/ two built in Serial Ports
Note: Replaced by IC693CPU363
IC693CPU364 CPU Model 364 Module (240K Bytes, 0.22 ms/K Boolean Execution) w/ Build In 0.400
Ethernet TCP/IP Interface
Note: May require using high capacity power supply IC693PWR330 or PWR331 for some
systems since CPU consumes approximately 7.5 Watts.
* IC693CPU374 CPU Model 374 Module (240K Bytes, 0.15 ms/K Boolean Execution) w/ Build In 0.400
10/100 MBit Ethernet TCP/IP Interface
Note: Requires CIMPLICITY ME Ver. 2.60 or higher -or- VersaPro 2.03 or higher.
IC693CPU352 CPU Model 352 Module (240K Bytes configurable User Memory, 0.22 ms/K 0.386
Boolean Execution) with HW Floating Point Math. Processor. Two built in Serieal
Ports
Note: The following manuals are recommended for the 90-30 PLC System: GFK-0356, GFK-0898. The battery for the CPU is
now included in the CPU box. The battery must be install into the power supply.
Note: Manual GFK-0898 is recommended for Racks and I/O modules. Battery is not included. Battery is now included in the
CPU box.
IC693PCM301 Series 90-30 Programmable Coprocessor Module (PCM), 192KB (47KB BASIC 0.431
Prgm.) with Y-Cable
Note: Programmable Coprocessor Modules can ONLY be used with Series 90-30 CPU331 or
higher. The following manuals are recommended for the 90-30 PCM Module: GFK-0255,
GFK-0487
IC693PCM311 Series 90-30 Programmable Coprocessor Module (PCM), 640KB (190KB BASIC 0.431
Prgm.) with Y-Cable
Note: Programmable Coprocessor Modules can ONLY be used with Series 90-30 CPU331 or
higher. The following manuals are recommended for the 90-30 PCM Module: GFK-0255,
GFK-0487
IC693PCM300-MP Series 90-30 Programmable Coprocessor Module (PCM), 160KB (35KB BASIC 0.454
Prgm.) with Y-Cable (Modified for use by OEM's)
HE693ASC900 ASCII Basic Module 64K with RS232 and RS422/485 Ports...................................... 0.493
HE693IBM235 Terminal Emulation Software on 3.5" diskette (included with ASCxxx)....................... 0.050
HE693CBL222 RS232 cable for ASCII Basic Module to 9-pin PC....................................................... 0.128
HE693SNP900 SNP Slave Module with RS232 and RS485 Ports....................................................... 0.439
HE693RTM705 RTU/Modbus Master with RS232, RS485 Ports and Report by Exception................. 0.581
HE693RTU900 RTU Slave Module with RS232 and RS485 Ports....................................................... 0.581
HE693SNPCBL RS-232 to RS-422/485 Miniconverter with 9-pin PC Cable (2m)................................ 0.213
HE693XTADP PC-XT & PS/2 (WM II) (25-pin) to 9-pin Adapter......................................................... 0.100
IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141
Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable
can also be used on the CPU351/352 as well as on the Ethernet interface. When using
DSM314, this cable is only required for flash firmware upgrades.
IC693CMM302 Series 90-30 Enhanced Genius Communications Module (GCM+) (Up to 4K Bytes 0.371
of Global Data)
Note: The following manual is recommended: GFK-0695
IC693CBL315-6M Cable (6m) with Connector On One End (for MDL654/5 and MDL752/3)................... 0.750
IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141
Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable
can also be used on the CPU351/352 as well as on the Ethernet interface. When using
DSM314, this cable is only required for flash firmware upgrades.
IC693CBL321 Cable for Connection from Module Connector (ACC334) to Terminal Base TBD D0898
(ACC329 through ACC333), 1m
IC693CBL322 Cable for Connection from Module Connector (ACC334) to Terminal Base TBD D0898
(ACC329 through ACC333), 2m
IC693CBL323 Cable for Connection from Module Connector (ACC334) to Terminal Base TBD D0898
(ACC329 through ACC333), 0.5m
IC693CBL324 Terminal Board Connection Cable 1m........................................................................ 0.350
Note: This cable is used to connect the ACC335 or the ACC336 to the DSM module. One per
axis required
IC693CBL327 Cable-90Deg.-Left Side (3m) with Connector On One End (for MDL654/5 and 0.100
MDL752/3)
IC693CBL328 Cable-90Deg.-Right Side (3m) with Connector On One End (for MDL654/5 and 0.100
MDL752/3)
IC693CBL329 Cable-90Deg.-Right Side (1m) with two Connectors on both sides............................. TBD
IC693CBL330 Cable-90Deg.-Left Side (1m) with two Connectors on both sides............................... TBD
IC693CBL331 Cable-90Deg.-Right Side (2m) with two Connectors on both sides............................. 0.325
IC693CBL332 Cable-90Deg.-Left Side (2m) with two Connectors on both sides............................... 0.335
IC693CBL333 Cable-90Deg.-Right Side (0.5m) with two Connectors on both sides.......................... TBD
IC693CBL334 Cable-90Deg.-Left Side (0.5m) with two Connectors on both sides............................ TBD
IC690CBL701 PCM to Workmaster Cable (3m)................................................................................. 0.200
IC690CBL702 PCM to PC-AT Cable (3m).......................................................................................... 0.200
IC690CBL705 PCM to PC-XT and PS/2 Cable (3m).......................................................................... 0.250
HE693CBL222 RS232 cable for ASCII Basic Module to 9-pin PC....................................................... 0.128
HE693TRMCBL Cable for High Density Phoenix Terminal Block (used with IC693MDL654, 655, 0.900
752, 753)
IC693ACC317 Connector, Qty 10, Crimp Type (for MDL654/5, MDL752/3 and APM)....................... 0.295
Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate
(10) single-ended cables. Additional tools will be required for crimp and ribbon kits.
IC693ACC318 Connector, Qty 10, Ribbon Type (for MDL654/5, MDL752/3 and APM)..................... 0.181
Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate
(10) single-ended cables. Additional tools will be required for crimp and ribbon kits.
IC693ACC319 Spare Parts Kit (for CPU, I/O and PCM)..................................................................... 0.998
IC693ACC320 Spare Parts Kit (for Power Supply).............................................................................. 0.023
IC693ACC324 Retainer Bracket for 5 Slot Base................................................................................. 0.091
IC693ACC325 Retainer Bracket for 10 Slot Base............................................................................... 0.181
IC693ACC329 TBQC Base for IC693MDL645, MDL646 and MDL240............................................... 0.101
IC693ACC330 TBQC Base for IC693MDL740 and MDL742.............................................................. 0.101
IC693ACC331 TBQC Base for IC693MDL741.................................................................................... 0.101
IC693ACC332 TBQC Base for IC693MDL940.................................................................................... 0.101
IC693ACC333 TBQC Base for IC693MDL340.................................................................................... 0.101
IC693ACC337 TBQC Base for IC693MDL654, MDL655, MDL752 and MDL753............................... 0.101
IC693ACC334 Module Connector for use with all 90-30 Terminal Bases........................................... 0.041
IC693ACC335 Axis Terminal Board.................................................................................................... 0.120
Note: This terminal board (DIN Rail compatible) allows convenient connection of I/Os (over-
travel, home, strobe, analogue out, CTL10/12 outputs) and the servo amplifier through
IC800CBL001/002. One per axis required.
Note: Only modules shown below are available for ordering as low temperature tested. The design temperature range of
Series 90-30 programmable controller products is 0 ºC to 60 ºC (+32 ºF to +140 ºF). All the Series 90-30 products are tested
to verify functional operation over the design temperature range. Prior to shipment from the factory, the LT suffix products
undergo and additional temperature test to verify functional operation over a wider temperature range -40 ºC to +60 ºC (-40 ºF
to +140 ºF). The non analog LY suffix products will be tested to verify functional operation over a temperature range of -40 ºC
to +60 ºC (-40 ºF to +140 ºF). The analog LT modules are to have passed this screen if the accuracy of the inputs is ±1% over
the temperature range -40 ºC to +60 ºC (-40 ºF to +140 ºF). Use of these products outside of the desing temperature range 0
ºC to 60 ºC (+32 ºF to +140 ºF) must be limited to non critical operation.
As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as
Logic Developer PLC, which is fully compatible with existing VersaPro-based applications. Logic Developer PLC also allows
users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and
powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro,
Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and
problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and
Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as
View or Motion Developer. Please refer to the CIMPLICITY Machine Edition section for details.
Hardware support:
-Logic Developer PLC Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90-30 and
Series 90 Micro PLC’s.
Please also refer to the CIMPLICITY Machine Edition section to the end of the price list for more ordering information.
* IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable 0.500
and RS485 Mini-Converter
Note: Includes RS-232 to RS-422/485 Miniconverter (DB-9 to DB-15) with DB-9 Serial PC
cable to connect the PLC to the serial port of a PC (2m). (Catalog # HE693SNPCBL)
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
* IC646MPSU11 Logic Developer - PLC Standard Edition, single license, Upgrade from VersaPro 0.500
Standard Edition, Logicmaster 90-30 or Control. (Serial number required, valid
subscription service not required)
Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster
Series 90-30. Please provide serial number.
Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help
Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition remote
troubleshooting. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on
an annual basis. The Technical Support helpdesk is available for 3 callers. Additional callers may be purchased using catalog
# IC648SAF000. Access for the Technical Support Help Desk is 7 AM to 8 PM Eastern Standard Time.
Logic Developer State -Standard Edition provides configuration and programming of GE Fanuc Series 90™-30 CPU351 and
greater PLC's. Release 9.1 is the minimum release level supported. Please refer to the CIMPLICITY Machine Edition section
for ordering information.
Note: Release 5.00 of the C Programmer’s Toolkit for Series 90-70 and Series 90-30 controller supports the creation of Series
90-70 PLC CPU C blocks and standalone C programs using the Microsoft® C Compiler versions 6.0 or 7.0 or Microsoft Visual
C/C++ versions 1.0 or 1.5. The Toolkit also supports 90-30 C subroutines and C
main programs using Version 8.00C of the Microsoft C Compiler. Release 8.00C of the Microsoft C Compiler is included with
the toolkit and can be used instead of purchasing the compiler separately. Series 90-30 support is present in both PLC C
Toolkits listed above; however, the 90-30 PLC does not support the use of the C debugger; therefore, 90-30 functionality is
the same in both versions (IC641SWP709/719).
Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058) is a runtime toolkit which
allows Microsoft Windows NT user-written C or C++ applications to access data from Series
90-70/90-30/90-20 and Micro Controllers. This toolkit requires Microsoft 32 bit compiler. This
catalog number requires and includes one copy of the Host Drivers for Windows 95/NT
(IC641SWP080). Signed Toolkit License (GFJ-318) required prior to purchase.
Includes:
IC641SWP080 Host Drivers for Windows 95/NT
GFK-0870 Host Communications Toolkit C/C++ User's Manual
Technical Support
Object file on distribution media (one 3.5 inch high-density diskette).
IC641SWP080 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 1......................................... 0.018 M0802
Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP
communications software and the Toolkit for Windows 95/NT C/C++ Applications
(IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-
0317) for a single machine. The IC641SWP081 product is provided as a convenience to
users requiring use of the Host software on multiple platforms.
IC641SWP081 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 10....................................... 3.800 M0802
Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP
communications software and the Toolkit for Windows 95/NT C/C++ Applications
(IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-
0317) for a single machine. The IC641SWP081 product is provided as a convenience to
users requiring use of the Host software on multiple platforms.
IC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802
IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802
IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802
IC641SWP065 Motion Mate APM/DSM/MCS 300 Motion Programmer Software............................... 0.470
HE693CALKIT Calibration Kit for all HE Analog Modules (Only required for recalibration)................. 0.397
HE693IBM235 Terminal Emulation Software on 3.5" diskette (included with ASCxxx)....................... 0.050
CRITICAL CONTROL
* IC641HBR300 Max-ON Lite................................................................................................................ 0.779
Note: >351 or 36X CPUs, supports 256DI, 64DQ, 32AI, 12AQ, 300 Sync Registers, 1 simplex
I/O LAN, uses Genius Sync Data. The Max-ON tools requires VersaPro version 1.5 and is
designed to operate with either Windows® 95, 98 or NT
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
The following manuals are recommended for the Series 90-70 controller system:
GFK-0262 Series 90-70 Programmable Controller Installation Manual
GFK-0600 Series 90-70 Programmable Controller Data Sheet Manual
GFK-1192 Series 90-70 System Manual
IC697PWR711 Power Supply 120/240 Vac +125 Vdc, 100 Watts (5Vdc, +/-12 Vdc).......................... 1.588
Note: Replaces IC697PWR731/732 in Rev. D and later versions
Note: Cables IC600WDXXX are used as local I/O expansion cables for Series 90-70.
IC697PCM711-MP Programmable Coprocessor Module (For OEM Use Only), (Requires Memory 0.544
MEM71x)
Note: PCM memory expansion is recommended for MegaBasic applications. Memory
modules/program size is as follows: MEM713/47 KB, MEM715/61 KB, MEM717/104 KB,
and MEM719/190 KB. The following manuals are recommended for the 90-70 PCM: GFK-
0255, GFK-0487
IC697CMM711 Series 90-70 Serial Communication Coprocessor Module (CCM, SNP, SNPx and 0.499
RTU)
Note: The following manual is recommended for the 90-70 CMM711 Module: GFK-0582
# IC697CMM741 Series 90-70 MMS or TCP/IP Ethernet LAN Interface................................................ 0.544 M1102
Note: IC651ENS040 software required for MMS operation. IC651ENS042 software required
for TCP/IP operation. The IC651ENS042 is not included in the IC697CMM741 package but is
included with Logicmaster 90-70 Ethernet TCP/IP packages (IC641SWP/SWC713 and
SWP/SWC716). Only one copy of IC651ENS040 or IC651ENS042 is required per network.
IC697PCM711 Series 90-70 Programmable Coprocessor Module (PCM), (Requires Memory 0.544
MEM71x)
Note: PCM memory expansion is recommended for MegaBasic applications. Memory
modules/program size is as follows: MEM713/47 KB, MEM715/61 KB, MEM717/104 KB,
and MEM719/190 KB. The following manuals are recommended for the 90-70 PCM: GFK-
0255, GFK-0487
CRITICAL CONTROL
IC697CPM790 GMR - 90-70 CPU (486).............................................................................................. 0.885
Note: Requires GMR Configuration Software, IC641SWP715
IC697CGR772 Hot Standby Genius Dual Bus CPU, 96 MHz, 486DX4, 32-Bit, Floating Point, 512K 1.350
byte fixed user memory, 2K discrete I/O, 8K analog I/O
IC697CGR935 Hot Standby Genius Dual Bus CPU, 96 MHz, 486DX4, 32-Bit, Floating Point, 1.050
1024K byte fixed user memory (fast), 12K discrete I/O, 8K Analog I/O
IC697CPU788 CPU 788, 100 Triplex Voted I/O, GMR Version (Requires Memory MEM735)........... 0.680
Note: CPU788 and CPU789 must have a 512K memory daughterboard to operate. Requires
GMR Configuration Software IC641SWP714 for phase 2 or IC641SWP715 for phase 3 (see
software below).
IC697MSC800 GMR Redundancy System 100 TMR I/O (Rack, PS, CPU, RAM, 3-GBC)................. TBD
Note: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714
for phase 2 or IC641SWP715 for phase 3. See Software category.
IC697MSC801 GMR Redundancy System 2 K TMR I/O (Rack, PS, CPU, RAM, 3-GBC).................. TBD
Note: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714
for phase 2 or IC641SWP715 for phase 3. See Software category.
IC697MSC802 GMR Redundancy System 2 K TMR I/O 486 CPU (Rack, PS, CPU, RAM, 3-GBC).. TBD
Note: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714
for phase 2 or IC641SWP715 for phase 3. See Software category.
Compatible with GMR CPUs. Requires IC690ACC901 and IC690CBL714, not included.
* IC641SWP745 Genius Modular Redundancy (GMR) Programming Software (Phase 4)................... 0.779
Note: TUV approved version of Genius Modular Redundancy (GMR) Phase IV software for
use in Fire and Gas Applications.
* IC660BRD020 Genius 24/48 Vdc Source Block for Redundancy "T" Output Configurations.............. 1.558
Note: This Genius block is intended for use with GMR systems requiring "T" output
configurations. It's terminal assembly include blocking diodes, preventing current backfeeding
between blocks.
* IC660ERD020 Genius 24/48 Vdc Source Electronics Module for Redundancy "T" Output 1.612
Configurations
Note: This Genius electronics module is to be used in combination with the IC660TRD020
terminal asm. Both are intended for use with GMR systems requiring "T" output
configurations. The IC660TRD020 terminal assembly includes blocking diodes, preventing
current
* IC660SLA020 Red Safety Label Kit for IC660BBA020 Genius Blocks............................................... 0.206
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA021 Red Safety Label Kit for IC660BBA021 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA024 Red Safety Label Kit for IC660BBA024 Genius Blocks............................................... 0.435
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA026 Red Safety Label Kit for IC660BBA026 Genius Blocks............................................... 0.435
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA100 Red Safety Label Kit for IC660BBA100 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA101 Red Safety Label Kit for IC660BBA101 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA103 Red Safety Label Kit for IC660BBA103 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA104 Red Safety Label Kit for IC660BBA104 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLA106 Red Safety Label Kit for IC660BBA106 Genius Blocks............................................... TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLD020 Red Safety Label Kit for IC660BBD 020 Genius Blocks.............................................. 0.412
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLD021 Red Safety Label Kit for IC660BBD 021 Genius Blocks.............................................. 0.412
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLD024 Red Safety Label Kit for IC660BBD 024 Genius Blocks.............................................. TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660SLD025 Red Safety Label Kit for IC660BBD 025 Genius Blocks.............................................. TBD
Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in
a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.
* IC660TRD020 Genius 24/48Vdc Terminal Asm. for Redundancy "T" Output Configuration.............. 1.443
Note: This Genius terminal asm. is to be used in combination with the IC660ERD020
electronics module. Both are intended for use with GMR systems requiring "T" output
configurations. The IC660TRD020 terminal assembly includes blocking diodes, preventing
current
* IC687RCM711 Half Slot Redundant Communications Module for HSB Systems............................... TBD
Note: Notes_EN
For use with integrators racks or dual redundant racks (IC697CHS770 & IC697CHS771).
Takes up the space of only one 0.8 inch VME slot, allowing a 90-70 CGR system to fit in one
dual redundant rack. Typically used in combination with IC687BEM713.
As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as
Logic Developer PLC, which is fully compatible with existing VersaPro-based applications. Logic Developer PLC also allows
users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and
powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro,
Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and
problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and
Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as
View or Motion Developer. Please refer to the CIMPLICITY Machine Edition section for details.
Supported features: All 90-70 Instructions; Indirect References; Parametrized Subroutine Blocks (PSBs); Standalone C
Programs; C Blocks; VME Interrupt triggered logic execution; Configuration of Bulk Memory Area (BMA); Configuration of Hot
Standby CPU Redundancy. Not supported features: Sequential Function Chart programming (SFC); Configuration of Genius
Remote I/O Racks (GR7); Word-for-word changes; Configuration of FIP Bus Controllers; Configuration of advanced user
parameters for Ethernet. Many of the features not supported in version 2.5 will be supported in the next release of Machine
Edition 3.0. Please call for details and availability.
Hardware support:
-Logic Developer PLC Professional Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro
PLC’s, Series 90-30 and Series 90-70 PLC’s.
Please also refer to the CIMPLICITY Machine Edition section to the end of the price list for more ordering information.
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a
SAFE contract which provides 1 year of free upgrades and product support.
* IC646MPPU11 Logic Developer - PLC Professional Edition, single license, Upgrade from 0.500
VersaPro Professional Edition, Logicmaster 90-70 or Control. (Serial number
required, valid subscription service not required)
Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster
Series 90-70. Please provide serial number.
Compatible with GMR CPUs. Requires IC690ACC901 and IC690CBL714, not included.
IC641SWP719 C Programmer Toolkit Professional For Series 90-70 PLCs....................................... 0.573 D0802
Note: The Toolkit Professional includes the standard 90-70 C Toolkit and all files required to
operate the C Application Debugger embedded in all release 6.00 and later Series 90-70
CPUs. The debugger is not available for programs and blocks written for Series 90-30 CPUs.
This product is a software product which is licensed to the user for use on a single PC at a
time. It can be used to create C function blocks which can be executed in any compatible
Series 90-70 PLC. Once a C block is created it can be placed in a Logicmaster or Control for
Series 90-70 Library and handled like any other program element.
Note: Release 5.00 of the C Programmer’s Toolkit for Series 90-70 and Series 90-30 controller supports the creation of Series
90-70 PLC CPU C blocks and standalone C programs using the Microsoft® C Compiler versions 6.0 or 7.0 or Microsoft Visual
C/C++ versions 1.0 or 1.5. The Toolkit also supports 90-30 C subroutines and C
main programs using Version 8.00C of the Microsoft C Compiler. Release 8.00C of the Microsoft C Compiler is included with
the toolkit and can be used instead of purchasing the compiler separately. Series 90-30 support is present in both PLC C
Toolkits listed above; however, the 90-30 PLC does not support the use of the C debugger; therefore, 90-30 functionality is
the same in both versions (IC641SWP709/719).
Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058) is a runtime toolkit which
allows Microsoft Windows NT user-written C or C++ applications to access data from Series
90-70/90-30/90-20 and Micro Controllers. This toolkit requires Microsoft 32 bit compiler. This
catalog number requires and includes one copy of the Host Drivers for Windows 95/NT
(IC641SWP080). Signed Toolkit License (GFJ-318) required prior to purchase.
Includes:
IC641SWP080 Host Drivers for Windows 95/NT
GFK-0870 Host Communications Toolkit C/C++ User's Manual
Technical Support
Object file on distribution media (one 3.5 inch high-density diskette).
IC641SWP080 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 1......................................... 0.018 M0802
Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP
communications software and the Toolkit for Windows 95/NT C/C++ Applications
(IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-
0317) for a single machine. The IC641SWP081 product is provided as a convenience to
users requiring use of the Host software on multiple platforms.
IC641SWP081 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 10....................................... 3.800 M0802
Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP
communications software and the Toolkit for Windows 95/NT C/C++ Applications
(IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-
0317) for a single machine. The IC641SWP081 product is provided as a convenience to
users requiring use of the Host software on multiple platforms.
IC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802
IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802
IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802
# IC651ENS040 Series 90-70 MMS/Ethernet Software for IC697CMM741........................................... 1.039 M1102
# IC651ENS042 Series 90-70 TCP/IP/Ethernet Software for IC697CMM741....................................... 0.733 M1102
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
MINI OCS
IC300OCS031 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. 0.822
logic with ESCP) - no network interface
IC300OCS033 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. 1.181
logic with ESCP) with High Speed Counter and PWM/PT - no network interface
IC300OCS035 Mini OCS with 8 DC Inputs (12/24 VDC), 6 Relay Outputs (4.0 A per point) - no 0.938
network interface
IC300OCS036 Mini OCS with 8 AC Inputs (120 VAC), 8 AC Outputs (80-250 VAC 0.3 A per TBD
point) - no network interface
IC300OCS037 Mini OCS with 8 AC Inputs (120 VAC), 6 Relay Outputs (4.0 A per point) - no TBD
network interface
IC300OCS041 Mini OCS with 16 DC Inputs (12/24 VDC), 12 DC Outputs (5/12/24 VDC, 0.5 A 0.895
pos. logic with ESCP) - no network interface
IC300OCS052 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. 0.888
logic with ESCP) and 4 Analog In / 2 Analog Outputs (Voltage) - no network
interface
IC300OCS053 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. 0.890
logic with ESCP) and 4 Analog In / 2 Analog Outputs (Current) - no network
interface
Note: Each Mini OCS comes with 2x20 LCD display and 16-key tactile feel keypad. The Mini OCS is designed for applications
with less than 28 I/O. The Mini OCS combines a logic controller, operator interface, I/O's and optional networking in one
compact system. The Mini OCS cannot be expanded by using SmartStack I/O Modules. The built-in RS-232 serial port is
modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands.
Note: Each Mini OCS comes with 2x20 LCD display and 16-key tactile feel keypad. The Mini OCS is designed for applications
with less than 28 I/O. The Mini OCS combines a logic controller, operator interface, I/O's and optional networking in one
compact system. The Mini OCS cannot be expanded by using SmartStack I/O Modules. The built-in RS-232 serial port is
modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands. The CAN port supports
CsCAN and DeviceNet Slave.
Note: OCS100/200/250 as well as the RCS210 support up to four SmartStack I/O Boards. The built-in RS-232 serial port is
modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands. The additional CAN port
supports CsCAN and DeviceNet Slave.
Note: Each controller (OCS100/200 and RCS210) supports up to four SmartStack I/O modules.
Note: Each controller (OCS100/200 and RCS210) supports up to four SmartStack I/O modules.
Note: Cscape software integrates logic, messaging and network into a single solution. Cscape runs on Windows95, 98,
NT,2000 and XP environments.
OCS DOCUMENTATION
GFK-1601 OCS: SmartStack I/O Modules User's Manual............................................................ TBD
GFK-1630 OCS: Cscape Programming Software User's Manual................................................. TBD
GFK-1631 OCS: Operator Control Station Hardware Manual...................................................... TBD
GFK-1635 OCS: CsCAN Network OPC Server User's Manual.................................................... TBD
GFK-1642 OCS: Operator Control Station Demonstration Case Manual..................................... TBD
GFK-1643 OCS: SmartStack User's Manual - Supplement for High Speed Counter................... TBD
GFK-1644 OCS: SmartStack User's Manual - Supplemente for Stepper Positioning Module...... TBD
GFK-1648 OCS: CAN Data Concentrator Module........................................................................ TBD
GFK-1666 OCS: SmartStack User's Manual - Supplement for ASCII BASIC Module.................. TBD
GFK-1673 OCS: ISA CsCAN Interface Board Product Specification and Installation Data.......... TBD
GFK-1687 Mini OCS: Operator Control Station Hardware Manual............................................... TBD
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
* IC220MDD841 Absolute Encoder Input, 4 Digital Inp. 24VDC, Digital Outp. 24 VDC, 500mA, 3- TBD
wire connection
Note: Requires 1 of IC220TBK202
VERSAPOINT ACCERSSORIES
IC220ACC001 Module Labels Narrow Qty. 10.................................................................................... 0.100
IC220ACC002 Module Lables Wide Qty. 10....................................................................................... TBD
IC220ACC003 Point Labels Numbered 1-100 Qty. 10........................................................................ TBD
IC220ACC004 Point Labels Blank Qty. 1000...................................................................................... TBD
IC220ACC005 Module Keying Tabs Qty. 100..................................................................................... TBD
* IC220ACC103 Motor Starter Power Connector................................................................................... 0.100
* IC220ACC104 Motor Starter Power Bridge......................................................................................... 0.100
* IC220ACC105 Motor Circuit Connector (Qty. 10), Spare.................................................................... 0.100
Note: Includes internal power supply, local station communications, BIU base, and fieldbus communications.
Note: Universal Field Control bases. Minimum one required per system. Choose any combination of types. Up to four bases
allowed per BIU. Select appropriate aux. TB for high density or analog modules.
IC670CBL003 2 Meter Cable for Connector Style Base, connector on one end................................ 0.636
IC670CBL004 2 Meter Cable for Connector Style Base, connector on both ends............................. 0.184
ACCESSORIES
IC670ACC001 Base to Base Replacement Connector Cable, Qty. 12............................................... 0.136
IC670ACC002 I/O Module Keying....................................................................................................... 0.045
IC670ACC003 Connector Kit for Connector Style Base...................................................................... 0.386
HE670ACC100 Input Simulator Module for Field Control .................................................................... 0.411
IC660HHM501-CE Hand Held Monitor including European Charger 220 Vac........................................... 2.700
Note: More Genius and Hand Held Monitor Accessoties under Chapter "Genius"
Note: An I/O block includes an Electronics Assembly and a Terminal Assembly, both of which may also be ordered
separately. For Ful Details See Separate Replacement Part Price List.
Note: An I/O block includes an Electronics Assembly and a Terminal Assembly, both of which may also be ordered
separately. For Ful Details See Separate Replacement Part Price List.
Note: An I/O block includes an Electronics Assembly and a Terminal Assembly, both of which may also be ordered
separately. For Ful Details See Separate Replacement Part Price List.
Note: An I/O block includes an Electronics Assembly and a Terminal Assembly, both of which may also be ordered
separately. For Ful Details See Separate Replacement Part Price List.
* IC753QSS602 QuickPanel 6" STN, 100 MHz CPU, 320x240 Pixels, 64 Colors, 1MB EPROM......... TBD
Note: Supported by GP-Pro 6.0 only.
* IC753QTS602 QuickPanel 6" TFT, 100 MHz CPU, 320X240 Pixels, 256 Colors,2MB EPROM........ TBD
Note: Supported by GP-Pro 6.0 only.
IC753QTS702 QuickPanel 7" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors,4MB EPROM......... 2500.000
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QTL002 QuickPanel 10" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors, 4MB EPROM...... 3500.000
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QTL202 QuickPanel 12" TFT, 100 MHz CPU, 800x600 Pixels, 256 Colors, 4MB EPROM...... 3500.000
Note: Supported software: ME/QuickDesigner/GP-Pro
* IC753QMH602 QuickPanel Handy 2000 6" Mono, 100 MHz CPU, 320x240 Pixels, 1MB EPROM..... 1.200
Note: Supported by GP-Pro 6.0 only.
* IC753QSH602 QuickPanel Handy 2000 6" STN, 100 MHz CPU, 320x240 Pixels, 64 Colors,1MB 1.200
EPROM
Note: Supported by GP-Pro 6.0 only.
* IC753QTH702 QuickPanel Handy 2000 7" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors,2MB 1.200
EPROM
Note: Supported by GP-Pro 6.0 only.
Note: The QuickPanel 2000 series is an extension of the exisiting QuickPanel family. These devices have an embeded
Ethernet interface (not Handy), CF card slot. They are also running a 100 MHz RISC CPU with up to 4MB memory and 256
colors.
The QuickPanel 2000 series can be programmed using GP-Pro 6 or QuickDesigner 3.6. Please contact GE Fanuc for
minimum software requirement.
QUICKPANEL UNITS
IC753QSS500 QuickPanel 5" STN, 25 MHz CPU, 320x240 Pixels, 8 Colors, 256K EPROM............ TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QMM601 QuickPanel Mini 6" Monochrome, 100 MHz CPU, 320x240 Pixels, 1MB EPROM..... TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QMS601 QuickPanel 6" Monochrome, 100 MHz CPU, 320x240 Pixels, 1MB EPROM............. TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
# IC753QSS601 QuickPanel 6" STN, 100 MHz CPU, 320x240 Pixels, 8 Colors, 1MB EPROM........... TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QTS601 QuickPanel 6" TFT, 100 MHz CPU, 320x240 Pixels, 64 Colors, 2MB EPROM.......... TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QEL901 QuickPanel 9" EL, 100 MHz CPU, 640x480 Pixels, 2MB EPROM.............................. TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
# IC753QML000 QuickPanel 10" Monochrome, 25 MHz CPU, 640x480 Pixels, 1MB EPROM............. TBD M06/02
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QSL001 QuickPanel 10" STN, 100 MHz CPU, 640x480 Pixels, 64 Colors, 2MB EPROM....... TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
IC753QTL001 QuickPanel 10" TFT, 100 MHz CPU, 640x480 Pixels, 64 Colors, 2MB EPROM........ TBD
Note: Supported software: ME/QuickDesigner/GP-Pro
# IC753QMH000 QuickPanel Handy 6" Monochrome, 25 MHz CPU, 320x240 Pixels, 1MB EPROM.... TBD M06/02
# IC753QSH000 QuickPanel Handy 6" STN, 25 MHz CPU, 320x240 Pixels, 8 Colors, 1MB EPROM.. TBD M06/02
Note: The QuickPanel is a practical and cost effective replacement for a variety of discrete devices, from push buttons and
pilot lights to message centers. Free form static and dynamic graphics can be added to present an information-rich picture to
the operator in a single glance. Each unit communicates with all major PLCs and PLC networks including A-B Remote I/O,
Data Highway Plus, Modicon Modbus Plus, SNP/SNPX and Genius (some require an optional, field-installed module). The
industrially designed QuickPanel is rated IP65F.
QUICKPANEL SOFTWARE
IC753SKT040 GP-Pro Kit - Software (v6) and Download Cables....................................................... TBD
Note: Software comes on CD-ROM with electronic documentation and download cable. The
download cable (IC753CBL049) connects a PC (RS-232) to the Quickpanel (TTY).
Note: GP Pro is a friendly Windows-based graphic editor that is common to all of the QuickPanel models. GP Pro offers a
comprehensive set of panel operators, including: push buttons, selector switches, pilot lights, text and numeric data displays,
bar-graph displays, static and dynamic bit-mapped or object oriented images and more. GP Pro is easy to use. GP Pro is the
recommended programming software for all Quickpanel models. Some accessories required QuickDesigner to be used on
Quickpanel.
As part of the CIMPLICITY ME family of products, QuickDesigner has been integrated into the unified working environment as
View Developer for QuickPanel, which is fully compatible with existing QucikDesigner applications.View Developer for
QuickPanel can be combined with Logic Developer PLC. Please refer to the CIMPLICITY Machine Edition section for details.
Hardware support:
-View Developer for QuickPanel supports QuickPanel family and QuickPanel 2000 family.
QPI-ABR-201 Quickpanel Interface Module for A-B 1771 Remote I/O.............................................. 0.590
Note: Compatible with GP-PRO for 9", 10" and 12" QP.
Compatible with QuickDesigner for 9", 10" and 12" QP.
QPJ-ABR-201 Quickpanel jr. Interface Module for A-B 1771 Remote I/O.......................................... 0.560
Note: Compatible with GP-PRO for 5", 6" 25Mhz Mono and STN and 6" 100MHz TFT.
Compatible with QuickDesigner for 5" and 6" QP.
* QPI-PBS-202-D Quickpanel Interface Module for Profibus - 9" and 10" QP......................................... TBD
Note: Compatible with QuickDesigner only.
* IC753MPFS21 Quickpanel Interface Module for Profibus - 5" and 6" QP........................................... TBD
Note: Compatible with GP-PRO only for 5" and 6" QP. Require the Bus Conversion Unit
(IC753MPF999) to be used with for 9" and 10" QP. Not compatible with 2000 series (order
IC753MPF221).
Note: Contact GE Fanuc representative for Quickpanel compatibility or other communication modules.
IC753CBL112 Keyence, KV-L2, KV-10R Program port, RJ11 connector RS-232.............................. TBD
PRINTER CABLES
IC753CBL105 Printer cable, QuickPanel tool port to 9 pin female connector, RS-232, 10ft.............. TBD
Note: Please order PSM-PRCB00 for QuickPanel 2000 Series.
IC753WHC050 Hard Type Cover Sheet for 5" QP (10 pcs)................................................................. TBD
IC753WHC060 Hard Type Cover Sheet for 6" QP (10 pcs)................................................................. TBD
* IC753WHC072 Hard Type Cover Sheet for 7" 2000 QP (5 pcs).......................................................... TBD
IC753WHC090 Hard Type Cover Sheet for 9" QP (5 pcs)................................................................... TBD
IC753WHC100 Hard Type Cover Sheet for 10" QP (5 pcs)................................................................. TBD
Note: Not compatible with 2000 series. Order IC753WHC122 instead.
* IC753WHC122 Hard Type Cover Sheet for 12" and 10" 2000 QP....................................................... TBD
IC753WHC0H0 Hard Type Cover Sheet for 6" Handy QP (10 pcs)...................................................... TBD
Note: Not compatible with 2000 series.
Note: The touch screen is made of a tough, flexible material that can withstand many chemicals and hard use. After repeated
use, the overlay may get scratched or damaged. You can protect the touch screen from abnormal use by adding a thin film
over the touch screen. When the film is worn out, simply peel it off and add a new one.
QUICKPANEL MAINTENANCE
Please contact your GE Fanuc representative for the exact Back Light required for your QuickPanel.
QUICKPANEL ACCESSORIES
IC753WMU000 Multi-Unit E for 6" TFT (CF-Card sold separately)...................................................... TBD
IC753WMU001 Multi-Unit E for 9" and 10" (CF-Card sold separately)................................................. TBD
IC753WCF000 CF Card Front Maintenance Unit for Multi-Unit E........................................................ TBD
IC753MVIL02 Video-Mix Unit for 12" and 10" QP 2000..................................................................... TBD
Note: Compatible with GP-PRO 6. Supported only for the IC753QTL002 and IC753QTL202.
HMI-KPN-402 Numeric and Function Keypad (for 2000 10" units only)............................................. 1.050
HMI-KPN-403 Numeric and Function Keypad (for 2000 12" units only)............................................. 1.050
Note: The keypad option adds external keypads from the 5" up to the 12" QuickPanel. The keypads are used in place of the
touch screen or along with the touch screen. For example, instead of touching the QUICKPANEL screen to activate a Push
Button, you can press an external keypad. You can also assign an external keypad to simulate a push button, selector switch,
goto panel button, numeric data entry, print screen button or word button. Keypads require QuickDesigner or Machine Edition
to be configured.
VERSAMAX DATAPANEL
IC200DTX200 DataPanel 20 - 6 operation keys / 2 line display (5V).................................................. 0.335
Note: Operator Interface for changing timer/counter/register values. No stored messaging.
Requires IC200CBL550 cable or equivalent. No DataDesigner programming package
required.
IC200DTX850 DataPanel 85 - 8 function keys and data entry keypad / 4 line display (24V).............. 0.500
Note: Requires IC200CBL555 cable or equivalent.
Note: All VersaMax Datapanel requires DataDesigner 5.1.0 or later except the IC200DTX200.
IC752SKT009 DataPanel 150 Starter Kit: Includes Datapanel 150 (DFT000), download & 2.923
communication cables, DataDesigner, user & programming manuals.
Note: This unit includes: Datapanel 150 - IC752DFT000, DataDesigner software -
IC752DDZ000 and Datapanel to SNP cable - IC752BCL101.
IC752DSX000 DataPanel 160 - 240x64 LCD display w/ LED backlight. Includes integrated keypad 1.100
for data entry. No touch capability. Various sizes of text, bitmaps, bar graphs.
Supports limited PC/104 capability. Order new DataDesigner S/W IC752DDZ000.
Note: Use DataDesigner to configure. Now includes real time trends and host comms.
IC752SKT008 DataPanel 160 Starter Kit: Includes Datapanel 160 (DSX000), download & 3.024
communication cables, DataDesigner, user & programming manuals
Note: This unit includes: Datapanel 160 - IC752DSX000, DataDesigner software -
IC752DDZ000 and Datapanel to SNP cable - IC752BCL101.
Note: All units powered by 9-35 VDC. All units programmed via DataDesigner software, ordered separately. Starter kits
include Datapanel operator interface unit, programming cable, user manual, programming manual, SNP cable, and
DataDesigner. One copy of DataDesigner required per customer location.
Note: All units powered by 9-35 VDC. All units programmed via DataDesigner software, ordered separately. Starter kits
include Datapanel operator interface unit, programming cable, user manual, programming manual, SNP cable, and
DataDesigner. One copy of DataDesigner required per customer location.
DATAPANEL CABLES
IC752BCL000 Datapanel Download Cable......................................................................................... 1.000
Note: Cable is used to transfer configuration from a PC to the DataPanel.
Note: Only one purchased copy of Datadesigner is required per site. Configures all Datapanels. Includes Datadesigner
User's Manual. Datadesigner is not included with the Datapanel hardware purchase, except for starter kits.
CONNECTIVITY
IC752GEN100 PC/104 Genius Card................................................................................................... 0.300
Note: Genius card for use in Datapanels with PC/104 capability.
VT 100 DATAPANEL
IC752DVT150 Datapanel DP 150 VT100............................................................................................ TBD
Note: VT100 firmware on DataPanel 150 allows DataPanel to be used as standard data entry
terminal
Note: VT100 firmware on DataPanel allows DataPanel to be used as terminal. No programming software needed.
DATAPANEL ACCESSORIES
IC752MNL001 WinCfg User's Manual................................................................................................. 0.275
Note: GFK-1475 Covers the WinCfg configuration software.
IC752MSC001 Datapanel Power Connector - One supplied with every Datapanel that uses this TBD
connector (Datapanel K, J+, 240, H, 150, 160)
Note: Spare Part. Power connector for the Datapanel 100 Series, 200 Series, K, J+, or H.
DATAPANEL DOCUMENTATION
GFK-1475 WinCfg Software User's Guide.................................................................................... 0.300
Note: Software for mature Datapanel
CONTROLSTATION CE
IC752CCS049 ControlStation CE II 6" Controller................................................................................ TBD
IC752CCK049 ControlStation CE II 6" Controller with Developer Kit.................................................. TBD
IC752PBMU01 Profibus Master for 6" ControlStation II....................................................................... TBD
IC752CDS049 ControlStation CE IIx 10" Controller............................................................................ TBD
IC752CDK049 ControlStation CE IIx 10" Controller with Developer Kit.............................................. TBD
IC752PBMU11 Profibus Master for 10" ControlStation Iix................................................................... TBD
IC752BBRU11 Ethernet BBSRAM Card for 10" ControlStation Iix...................................................... TBD
Note: The ControlStation CE unit is a 200 MHz SH4 Processor, 32 MB RAM, 16 MB Flash ROM, 2 Serial Ports, PS2
Keyboard & USB Ports, 24 VDC Operation. The unit includes a View & Logic PC Runtime Licence.
VIEWSTATION CE
IC752VDS048 10.5" TFT Color ViewStation CE SH4......................................................................... 0.800
Note: SH4 CPU, 24VDC. Includes a View Runtime licence.
Note: The ViewStation CE unit is a 200 MHz SH4 Processor, 32 MB RAM, 16 MB Flash ROM, 2 Serial Ports, PS2 Keyboard
& USB Ports, 24 VDC Operation. The unit includes a View Runtime Licence.
CIMPLICITY Station
The Station familly is based on Windows 2000 Operating System and is bundled with CIMPLICITY® Machine Edition. Two
versions of computer are available:
Standard: Via 750MHz with 128 MB RAM, 13GB HD and Floppy/CD ROM
Advanced: Coppermine 900MHz with 256 MB RAM, 13GB HD and Floppy/RW-CD ROM
For other Operating System, please contact your GE Fanuc representative.
Unbundled Station
IC5002TAW0000 12", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 7.000
IC5002TBW0000 12", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 7.000
IC5005TAW0000 15", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 9.000
IC5005TBW0000 15", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 9.000
* IC5008TAW0000 18", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 11.000
* IC5008TBW0000 18", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 11.000
Note: Unbundled Station are coming only with Windows 2000 Operating System. No GE Fanuc software are delivered.
Note: Delivered with windows 2000 and CIMPLICITY Machine Edition View & Logic Developer PC 8000 I/O. CIMPLICITY
Station can be delivered pre-installed, pre-configured and pre-licensed: ask for quotation.
Note: Delivered with windows 2000 and CIMPLICITY Machine Edition View & Logic PC Runtime 1500 I/O. CIMPLICITY
Station can be delivered pre-installed, pre-configured and pre-licensed: ask for quotation.
Note: Delivered with windows 2000 and CIMPLICITY Plant Edition Server Unlimited I/O Runtime and Development.
OPERATOR STATIONS
HE500TIU050 Operator Station TIU050, 2x20, LCD.......................................................................... 0.503
HE500TIU050-02 Operator Station TIU050, 2x20, LCD + RTC............................................................... TBD
HE500TIU100 Operator Station TIU100, 8x20, LCD......................................................................... 0.700
HE500TIU100-02 Operator Station TIU100, 8x20, LCD + RTC.............................................................. TBD
HE500TIU101 Operator Station TIU100, 8x20, LCD + Cscan........................................................... TBD
HE500TIU101-02 Operator Station TIU100, 8x20, LCD + Cscan + RTC............................................... TBD
HE500TIU102 Operator Station TIU100, 8x20, LCD + Profibus........................................................ TBD
HE500TIU102-02 Operator Station TIU100, 8x20, LCD + Profibus + RTC............................................ TBD
HE500TIU103 Operator Station TIU100, 8x20, LCD + DeviceNet..................................................... TBD
HE500TIU103-02 Operator Station TIU100, 8x20, LCD + DeviceNet + RTC......................................... TBD
HE500TIU110 Operator Station TIU110, 8x20, LCD, Num Keypad................................................... TBD
HE500TIU110-02 Operator Station TIU110, 8x20, LCD, Num Keypad +RTC........................................ TBD
HE500TIU111 Operator Station TIU110, 8x20, LCD, Num Keypad + Cscan.................................... TBD
HE500TIU111-02 Operator Station TIU110, 8x20, LCD, Num Keypad + Cscan + RTC......................... TBD
HE500TIU112 Operator Station TIU110, 8x20, LCD, Num Keypad + Profibus................................. TBD
HE500TIU112-02 Operator Station TIU110, 8x20, LCD, Num Keypad + Profibus + RTC...................... TBD
HE500TIU113 Operator Station TIU110, 8x20, LCD, Num Keypad + DeviceNet.............................. TBD
HE500TIU113-02 Operator Station TIU110, 8x20, LCD, Num Keypad + DeviceNet + RTC.................. TBD
HE500TIU200 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad............................ TBD
HE500TIU201 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + Cscan............. TBD
HE500TIU202 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + Profibus.......... TBD
HE500TIU203 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + DeviceNet....... TBD
HE500TSW232 Operator Station Development Kit (Software for TIUxxx on CD-ROM, RS232- 1.301
Programming cable, Software and Hardware Documentation) Operator Station
Development Kit (Software for TIUxxx on CD-ROM, RS232-Programming cable,
Software and Hardware Documentation)
Note: Includes Cbreeze TIU programming software, one download cable HE500CBL232 and
documentation
Note: All TIU units include the Operator Station Programming Software (Cbreeze). All units powered by 9-35 VDC. The
program download cable is included in the Operator Station Development kit or can be ordered as HE500CBL232.
RTC is for Real Time Clock.
OPERATOR INTERFACE
HE693TCR050 Data Access Unit......................................................................................................... 0.709
HE693FLT050 Series 90 Fault Table OIU........................................................................................... 0.638
HE693OIU057 Mini OIU, LCD Display................................................................................................. 0.893
HE693OIU057-01 Mini OIU, LCD Display, 24VDC................................................................................... 0.900
Note: Replaces HE693OIU057-24
HE693OIU157 OIU, LCD Display with Function Keys, Flash Memory................................................ 1.262
HE693OIU157-01 OIU, LCD Display with Function Keys, Flash Memory, 24VDC................................... 1.250
Note: Replaces HE693OIU157-24
HE693OIU177 OIU, VF Display with Function Keys, Flash Memory, 24VDC..................................... 1.262
HE693OIU277 OIU, 4-line VF Display with 14 Function Keys, SNP, 24VDC...................................... 1.375
HE693OIU297 OIU, 4-line VF Display with 14 Function keys, Genius I/F, 24VDC............................. 1.531
HE693OIU327 OIU, VF Display with Function Keys, 80-260VAC....................................................... 2.387
HE693OIU327-01 OIU, VF Display with Function Keys, 24VDC.............................................................. 2.350
Note: Replaces HE693OIU327-24
HE693OIU327-03 OIU, VF Display with Function Keys, European Chars., 24VDC................................. 2.250
Note: Replaces HE693OIU327-24E
HE693OIU357 OIU, VF Display with Function Keys and LED's, 80-260VAC...................................... 2.410
HE693OIU357-01 OIU, VF Display with Function Keys and LED's, 24VDC............................................. 2.300
Note: Replaces HE693OIU357-24
HE693OIU357-02 OIU, VF Display with Function Keys and LED's, European Chars., 80-260VAC........ TBD
Note: Replaces HE693OIU357-E
HE693OIU357-03 OIU, VF Display with Function Keys and LED's, European Chars., 24VDC............... 1.430
Note: Replaces HE693OIU357-24E
HE693OIU907 OIU, VF Display with Function Keys, Genius I/F, 80-260VAC..................................... 2.920
HE693OIU907-01 OIU, VF Display with Function Keys, Genius I/F, 24VDC............................................ TBD
Note: Replaces HE693OIU907-24
HE693OIU907-03 OIU, VF Display with Function Keys, Genius I/F, European Chars., 24VDC............. TBD
Note: Replaces HE693OIU907-24E
Note: The Release 3.0 OIUs are recommended for all new customer sales, they include increased functionality at the same
list price. Release 3.0 OIUs include all features of Release 2.0 OIUs, plus: metal cover included standard, double integer
support, floating point scaling, enhanced function keys, enhanced trigger register, and more.
MOTION CONTROLLERS
Weight Item
Catalog Number Description (kg) Status
Note: The Motion Mate DSM300 modules interface digitally with the drive packages from GE Fanuc. See the Beta Servo
(PWM) and the Alpha Servo (PWM) sections of this ordering guide to select the drive packages. The DSM300 can also
interface with servo drives using an analog +/- 10V connection (DSM302 from firmware version 1.4; DSM314 from 1st
release).
MOTION CONTROLLERS
Weight Item
Catalog Number Description (kg) Status
IC693ACC316 Connector, Qty 10, Solder Eyelet Type (for MDL654/5, MDL752/3 and APM)........... 0.250
Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate
(10) single-ended cables. Additional tools will be required for crimp and ribbon kits.
Note: The Motion Mate APM300 modules interface with the servo drives using an analog +/- 10V connection.
MOTION CONTROLLERS
Weight Item
Catalog Number Description (kg) Status
MANUALS
GFK-1464 Motion Mate DSM300 User's Manual.......................................................................... 0.650
* GFK-1742 Motion Mate DSM314 User's Manual.......................................................................... TBD
GFK-0840 Motion Mate APM300 Standard Mode User's Manual................................................ 0.390
GFK-0781 Motion Mate APM300 Follower Mode User's Manual.................................................. 0.369
GFK-0840A-FR Motion Mate APM300 Standard Mode User's Manual - French.................................. 0.403
GFK-0664A-GE Motion Mate APM/DSM/MCS 300 Programmer's Manual - German......................... 0.338
GFK-0664 Motion Mate APM/DSM/MCS 300 Programmer's Manual.......................................... 0.338
GFK-0293 Series 90-30 High Speed Counter User's Manual....................................................... TBD
GFK-0293B-FR Series 90-30 High Speed Counter User's Manual - French........................................ TBD
GFK-0293C-GE Series 90-30 High Speed Counter User's Manual - German...................................... 0.200
GFK-1028 Series 90-30 I/O Processor Module User's Manual - English..................................... 0.077
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
Note: A complete set of English manuals (paper or CD-ROM) for the Series 90™-30 modules is delivered with the
LogicMaster™ 90-30 English programming software. The manuals, CD or set of manuals above should be ordered if you
need additional paper copies to those distributed with the libraries.
PM200SVS005 B-SVU-12 PWM, B Servo Motor (0.5Nm, 3000 rpm, 0.2kW, Brake 0.65 Nm)............ 2.040
Note: Add connector kits or cable kits type: Beta 0.5
PM200SVS010 B-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW)......................................... 4.700
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS015 B-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW, Brake 2Nm)..................... 3.540
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS020 B-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW)......................................... 5.900
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS025 B-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2Nm)..................... 7.500
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS030 B-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW)......................................... 7.950
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS035 B-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW, Brake 8Nm)..................... 6.140
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS060 B-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW)......................................... 11.100
Note: Add connector kits or cable kits type: Beta 1 - 6
PM200SVS065 B-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW, Brake 8Nm)..................... 15.800
Note: Add connector kits or cable kits type: Beta 1 - 6
Note: The following library is recommended for the packages above: PM100LBR001
Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda
connector for the Emergency Stop signal.
Beta motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.
Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.
PM202SVS125 B-SVU-20 PWM, A C Servo Motor (12Nm, 2000 rpm, 1.0 kW, Brake 35Nm)............. 19.140
Note: Add connector kits or cable kits type: M
PM202SVS220 B-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5 kW)................................... 32.970
Note: Add connector kits or cable kits type: M
PM202SVS225 B-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5 kW, Brake 35Nm)............. 32.970
Note: Add connector kits or cable kits type: M
Note: The following library is recommended for the packages above: PM100LBR001
Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda
connector for the Emergency Stop signal.
Alpha motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.
Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.
PM201SVS015 B-SVU-12 PWM, A Servo Motor (1Nm, 3000, 0.3kW, Brake 2 Nm)........................... 4.040
Note: Add connector kits or cable kits type: ALPHA 1-2
PM201SVS020 B-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5.kW)........................................ 5.040
Note: Add connector kits or cable kits type: ALPHA 1-2
PM201SVS025 B-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2 Nm).................... 5.040
Note: Add connector kits or cable kits type: ALPHA 1-2
PM201SVS030 B-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9.kW)........................................ 11.970
Note: Add connector kits or cable kits type: S
PM201SVS035 B-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW, Brake 8 Nm).................... 12.000
Note: Add connector kits or cable kits type: S
PM201SVS060 B-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4.kW)........................................ 16.970
Note: Add connector kits or cable kits type: S
PM201SVS065 B-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4 kW, Brake 8 Nm)................... TBD
Note: Add connector kits or cable kits type: S
PM201SVS120 B-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8.kW)...................................... 21.980
Note: Add connector kits or cable kits type: M
PM201SVS125 B-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8 kW, Brake 35 Nm)............... 21.970
Note: Add connector kits or cable kits type: M
PM201SVS221 B-SVU-80 PWM, A Servo Motor (22Nm, 2000 rpm, 3.8 kW)...................................... 32.970
Note: Add connector kits or cable kits type: M
PM201SVS226 B-SVU-80 PWM, A Servo Motor (22Nm, 2000 rpm, 3.8 kW, Brake 35 Nm)............... 32.970
Note: Add connector kits or cable kits type: M
Note: The following library is recommended for the packages above: PM100LBR001
Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda
connector for the Emergency Stop signal.
Alpha motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.
Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.
PM203SVS025 B-SVU-20 PWM, A M Servo Motor (2Nm, 3000 rpm, 0.7 kW, Brake 2Nm)................ 5.140
Note: Add connector kits or cable kits type: Alpha 1-2
PM203SVS090 B-SVU-80 PWM, A M Servo Motor (9Nm, 3000 rpm, 1.8 kW).................................... 15.970
Note: Add connector kits or cable kits type: S
PM203SVS095 B-SVU-80 PWM, A M Servo Motor (9Nm, 3000 rpm, 1.8 kW, Brake 8Nm)................ 15.970
Note: Add connector kits or cable kits type: S
Note: The following library is recommended for the packages above: PM100LBR001
Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda
connector for the Emergency Stop signal.
Alpha motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.
Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.
PM204SVS090 B-SVU-80 PWM, A L Servo Motor (9Nm, 3000 rpm, 2.0 kW)..................................... 20.970
Note: Add connector kits or cable kits type: S
Note: The following library is recommended for the packages above: PM100LBR001
Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda
connector for the Emergency Stop signal.
Alpha motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.
Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.
Note: Connector Kits for Servo Motors without brake contain one power connector for the servo motor, one serial pulse coder
connector for the motor and one Hirose 15 pins connector for the serial pulse coder signal on the amplifier.
Connector Kits for Servo Motors with brake contain the same connectors as previously listed plus one connector for brake at
the motor side.
Note: Connector Kits for Servo Motors without brake contain one power connector for the servo motor, one serial pulse coder
connector for the motor and one Hirose 15 pins connector for the serial pulse coder signal on the amplifier.
Connector Kits for Servo Motors with brake contain the same connectors as previously listed plus one connector for brake at
the motor side.
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative. Except for Beta 0,5 and Alpha 1/2, when a
brake is fitted on the motor, add a brake cable (see under "Cables for Brake").
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative. Except for Beta 0,5 and Alpha 1/2, when a
brake is fitted on the motor, add a brake cable (see under "Cables for Brake").
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative. Except for Beta 0,5 and Alpha 1/2, when a
brake is fitted on the motor, add a brake cable (see under "Cables for Brake").
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative. Except for Beta 0,5 and Alpha 1/2, when a
brake is fitted on the motor, add a brake cable (see under "Cables for Brake").
Note: Brake cable has a connector only at the motor side. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m,
27m and 30m. For other lengths, contact GE Fanuc or its representative.
Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to B-
65232EN (Beta Servo Amplifiers and Motors Description) for more information.
Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to B-
65232EN (Beta Servo Amplifiers and Motors Description) for more information. A 70W Resistor is already built in the BETA
40/80 Amplifier.
PM200BAT101 Absolute Encoder Battery + Battery Box (separate unit) + Cables.............................. 0.020
Note: The battery is required when the position information needs to be followed when the
motion controller is turned off. The serial pulse coder will behave in this case as an
ABSOLUTE encoder. One battery unit can drive up to 4 amplifiers/axis.
ACCESSORIES
PM200ACC100 Fuses for 24VDC PS of ß-SVU (Spare Qty 5)............................................................. 0.150
PM200ACC101 AMP Connector Kit for ß-SVU 12/20 (Spare Qty 5).................................................... 0.530
PM200ACC102 AMP Connector Kit for ß-SVU 40/80 (Spare Qty 5).................................................... 0.400
PM200FAN001 Fan Unit for Beta 40/80 Amplifier................................................................................ 0.700
PM100ACC102 Honda PCR20 Connectors Crimp (Spare Qty 5)......................................................... 0.250
PM100ACC103 Honda PCR20 Connectors Solder (Spare Qty 5)........................................................ 0.400
PM100ACC104 Hirose 15 Pin Connectors Solder (Spare Qty 5).......................................................... 0.100
MANUALS
PM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD
Note: This library contains the following manuals (English): B-65232EN, B-65235EN, B-
65245EN, B-65142E, B-65165E, B65150E, B-65192EN, B-65195EN, B-65162E.
Note: Manuals are not included with the systems. They have to be ordered separately.
PM301SVS030 A-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW)........................................ 12.900
PM301SVS035 A-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW, Brake 8Nm).................... 12.900
PM301SVS060 A-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4kW)........................................ 20.800
PM301SVS065 A-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4kW, Brake 8Nm).................... 17.900
Note: Add connector kits or cable kits type: S
PM301SVS120 A-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8kW)...................................... 23.000
PM301SVS125 A-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8kW, Brake 35Nm)................ 24.000
Note: Add connector kits or cable kits type: M
PM301SVS220 A-SVU-130 PWM, A Servo Motor (22Nm, 3000 rpm, 4.4kW).................................... 38.900
PM301SVS225 A-SVU-130 PWM, A Servo Motor (22Nm, 3000 rpm, 4.4kW, Brake 35Nm).............. 38.900
PM301SVS300 A-SVU-130 PWM, A Servo Motor (30Nm, 3000 rpm, 4.8kW).................................... 50.800
PM301SVS305 A-SVU-130 PWM, A Servo Motor (30Nm, 3000 rpm, 4.8kW, Brake 35Nm).............. 50.900
PM301SVS400 A-SVU-130 PWM, A Servo Motor (40Nm, 2000 rpm, 5.9kW).................................... TBD
PM301SVS405 A-SVU-130 PWM, A Servo Motor (40Nm, 2000 rpm, 5.9kW, Brake 35Nm).............. 61.900
Note: Add connector kits or cable kits type: L
PM301SVS401 A-SVU-130 PWM, A Servo Motor (40Nm Fan, 2000 rpm, 7.3kW)............................. 61.900
Note: Add connector kits L with Brake OR Fan, cable kits L and cable kit brake/fan 90VDC
PM301SVS406 A-SVU-130 PWM, A Servo Motor (40Nm Fan, 2000 rpm, 7.3kW, Brake 35Nm)....... 65.000
Note: Add connector kits L with Brake AND Fan, cable kits L and 2x cable kit brake/fan
90VDC
Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)
The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is
required (see the transformers section for details).
Alpha motors are IP65, straight shaft and provide an absolute serial pulse coder.
Add connector kits or cable kits to the above package as required.
Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)
The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is
required (see the transformers section for details).
Alpha motors are IP65, straight shaft and provide an absolute serial pulse coder.
Add connector kits or cable kits to the above package as required.
Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)
The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is
required (see the transformers section for details).
Alpha motors are IP65, straight shaft and provide an absolute serial pulse coder.
Add connector kits or cable kits to the above package as required.
Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)
The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is
required (see the transformers section for details).
Alpha motors are IP65, straight shaft and provide an absolute serial pulse coder.
Add connector kits or cable kits to the above package as required.
PM300SVS010 A-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW)......................................... 4.800
PM300SVS015 A-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW, Brake 2Nm)..................... 4.800
PM300SVS020 A-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW)......................................... 5.800
PM300SVS025 A-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2Nm)..................... 5.800
PM300SVS030 A-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW)......................................... 7.300
PM300SVS035 A-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW, Brake 8Nm)..................... 7.300
PM300SVS060 A-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW)......................................... 10.800
PM300SVS065 A-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW, Brake 8Nm)..................... 10.800
Note: Add connector kits or cable kits type: Beta 1-6
Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)
The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is
required (see the transformers section for details).
Beta motors are IP65, straight shaft and provide an absolute serial pulse coder.
Add connector kits or cable kits to the above package as required.
Note: Connector Kits for Servo Motors without brake contain one power connector for the servo motor, one serial pulse coder
connector for the motor and one Hirose 15 pins connector for the serial pulse coder signal on the amplifier.
Connector Kits for Servo Motors with brake contain the same connectors as previously listed plus one connector for brake at
the motor side.
Note: Connector Kits for Servo Motors without brake contain one power connector for the servo motor, one serial pulse coder
connector for the motor and one Hirose 15 pins connector for the serial pulse coder signal on the amplifier.
Connector Kits for Servo Motors with brake contain the same connectors as previously listed plus one connector for brake at
the motor side.
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths contact GE Fanuc or its representative.
Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal,
both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m,
22m, 27m and 30m. For other lengths contact GE Fanuc or its representative.
Note: Power and serial pulse coder cables have connectors at both ends, brake cable has a connector only at the motor side;
all cables in the Kit are the same length. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m.
For other lengths contact GE Fanuc or its representative.
ACCESSORIES
PM300RDR020 Alpha SVU Regenerative Discharge Resistor 16 Ohms 200W................................... 5.000
Note: A regenerative discharge resistor is required when the amount of regenerative energy
exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more
information.
PM300RDR085 Alpha SVU Regenerative Discharge Resistor 16 Ohms 800W for A-SVU-130........... 3.750
Note: A regenerative discharge resistor is required when the amount of regenerative energy
exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more
information.
PM300RDR125 Alpha SVU Regenerative Discharge Resistor 16 Ohms 1200W for A-SVU-130......... 6.000
Note: A regenerative discharge resistor is required when the amount of regenerative energy
exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more
information.
PM300BAT101 Absolute Encoder Battery + Battery Box (separate unit) + Connectors...................... 1.000
Note: The battery is required when the position information needs to be followed when the
motion controller is turned off. The serial pulse coder will behave in this case as an
ABSOLUTE encoder. One battery unit can drive up to 4 amplifiers/axis.
MANUALS
PM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD
Note: This library contains the following manuals (English): B-65232EN, B-65235EN, B-
65245EN, B-65142E, B-65165E, B65150E, B-65192EN, B-65195EN, B-65162E.
Note: Manuals are not included with the systems. They have to be ordered separately.
The communication interfaces allow an easy integration in the automation environment via Profibus DP, DeviceNet or Modbus
/ RS232. With the use of Motion Developer as a part of CIMPLICITY Machine Edition the user will have all benefits of a single
unified working environment.
S2K CONTROLLER
These devices offer amplifier and control capability in one package. All controllers have a second encoder interface for an
external master, two analogue inputs, one analogue output and one serial RS 232 interface to link the programming tool
Motion Developer or an operator panel such as Data Panel or Quick Panel.
All controllers with fieldbus interface provide 8 digital inputs and 6 digital I/O's, which are programmable for inputs or outputs.
The controllers without fieldbus interface offer 11 digital inputs and 10 programmable I/O's.
The S2K controllers are available in four different power ratings. Please combine the best fitting motor with the help of the
motor manual. Please ask for the cable kits.
Please ask for the cable kits. The following motors are without brake.
# SK800MSA055C032AR001 S2K servo motor, 0.4 Nm, with keyway, without brake................................................ 1.400
# SK800MSA070C044AR001 S2K servo motor, 1.2 Nm, with keyway, without brake................................................ 2.600
# SK800MSA092C044AR001 S2K servo motor, 1.5 Nm, with keyway, without brake................................................ 4.300
# SK800MSA092E044AR001 S2K servo motor, 2.2 Nm, with keyway, without brake................................................ 5.100
# SK800MSA115A088AR001 S2K servo motor, 3.7 Nm, with keyway, without brake................................................ 6.600
# SK800MSA115C088AR001 S2K servo motor, 6.8 Nm, with keyway, without brake................................................ 9.000
# SK800MSA115E088AR001 S2K servo motor, 9.8 Nm, with keyway, without brake................................................ 11.400
# SK800MSA142C088AR001 S2K servo motor, 11.3 Nm, with keyway, without brake.............................................. 14.000
# SK800MSA142E130AR001 S2K servo motor, 16 Nm, with keyway, without brake................................................. 18.000
# SK800MSA142G130AR001 S2K servo motor, 21 Nm, with keyway, without brake................................................. 21.000
# SK800MSA190C180AR001 S2K servo motor, 32 Nm, with keyway, without brake................................................. 28.500
# SK800MSA055C032BR001 S2K servo motor, 0.4 Nm, with keyway, with brake..................................................... 1.400
# SK800MSA070C044BR001 S2K servo motor, 1.2 Nm, with keyway, with brake..................................................... 2.600
# SK800MSA092C044BR001 S2K servo motor, 1.5 Nm, with keyway, with brake..................................................... 4.300
# SK800MSA092E044BR001 S2K servo motor, 2.2 Nm, with keyway, with brake..................................................... 5.100
# SK800MSA115A088BR001 S2K servo motor, 3.7 Nm, with keyway, with brake..................................................... 6.600
# SK800MSA115C088BR001 S2K servo motor, 6.8 Nm, with keyway, with brake..................................................... 9.000
# SK800MSA115E088BR001 S2K servo motor, 9.8 Nm, with keyway, with brake..................................................... 11.400
# SK800MSA142C088BR001 S2K servo motor, 11.3 Nm, with keyway, with brake................................................... 14.000
# SK800MSA142E130BR001 S2K servo motor, 16 Nm, with keyway, with brake...................................................... 18.000
# SK800MSA142G130BR001 S2K servo motor, 21 Nm, with keyway, with brake...................................................... 21.000
# SK800MSA190C180BR001 S2K servo motor, 32 Nm, with keyway, with brake...................................................... 28.500
ACCESSORIES
To complete the S2K with motor to a running system you have to add only the cable kit.
Accessories like filters, absolute encoders, operator panels or additional I/O's are available on request.
CABLE KITS
The cable kits existing of one motor cable and one resolver cable. Cable kits are available on request.
PROGRAMMING SOFTWARE
The programming tool Motion Developer, which is integrated in the automation software CIMPLICITY Machine Edition, offers
all benefits of a single programming environment. With the help of Configuration Wizards you can simply select and download
the parameters for the motor / drive combination. Application Wizards provide step-by-step instructions to guide the first-time
user through controller configuration and simple motion programming. Flowchart programming is the solution for easy-to-use
software development. Diagnostic tools such as Motion Oscilloscope and Histogram function allow extensive debugging.
* IC800FXMODEV CIMPLICITY Motion Developer software for the S2K Series Amplifier/Controllers, 0.500
single license, software only
Note: Communication cable is not included. Add SAFE for Machine Developer to receive free
software version upgrades and unlimited calls to Technical Support Help Desk.
Note: For the complete overview of the Machine Edition Software see CIMPLICITY Machine Edition.
All components of CIMPLICITY® Machine Edition are tightly integrated into one single programming environment and share
the same database. All components ship on one CD and are activated by licenses. CIMPLICITY® MACHINE EDITION ships
with a 4-day trial period for all components. Once you receive your order you are asked to register your license on the web at
www.gefanuc.com/CimplicityReg/. Once registered, a free 90-day software upgrade service (SAFE) is provided. GE Fanuc
strongly recommends to purchase an optional SAFE contract which provides 1 year of free upgrades and product support.
Note: Supports Windows 98 SE/NT/2000/XP for Development. Runtimes can be executed on Win NT/2000/XP platforms.
Systems include all available drivers and features including Web Publishing. (Check driver list for available control and PLC
access on particular target platforms). I/O point count includes I/O variables ony (internal points not counted). Each
Runtime/Development system contains a Runtime and Developmment License for the respective product purchased. For
Application larger than 1500 I/O, please contact Product Marketing.
Note: Includes everything in the standard Machine Edition Runtime/Development system plus VenturCom's Hard Real Time
(HRT) Extension for CIMPLICITY Logic PC. For Application larger than 1500 I/O, please contact Product Marketing.
Note: Suports Windows NT/2000/XP for Runtime platforms. Each system contains a Runtime license for the respective
product purchased. For Application larger than 1500 I/O, please contact Product Marketing.
Note: Includes everything in the standard Machine Edition Runtime system plus VenturCom's Hard Real Time (HRT)
Extension for for CIMPLICITY Logic PC. For Application larger than 1500 I/O, please contact Product Marketing.
Note: Standard package comes complete with hardware , software, an electronic copy of the hardware and sotware manuals
and an advanced network configuration tool, monitoring and diagnostic software, OPC and DDE data servers, driver
development code.
OEM package comes without software, with hardware, an electronic copy of the hardware and sotware manuals and a simple
network configuration tool.
-Nano/Micro Edition provides support for VersaMax Nano/Micro and Series 90 Micro PLC’s.
-Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro and Series 90-30 PLC’s.
-Professional Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro and Series 90-30 and
Series 90-70.
* IC646MPM101 Logic Developer - PLC Nano/Micro Edition, single license, with Programming Cable 0.500
Note: Includes DB-9 to RJ45 programming cable to connect the Micro PLC to the serial port
of a PC. (PN: IC200CBL500)
* IC646MPM001 Logic Developer - PLC Nano/Micro Edition, single license, software only.................. 0.500
* IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable 0.500
and RS485 Mini-Converter
Note: Includes RS-232 to RS-422/485 Miniconverter (DB-9 to DB-15) with DB-9 Serial PC
cable to connect the PLC to the serial port of a PC (2m). (Catalog # HE693SNPCBL)
* IC646MPS001 Logic Developer - PLC Standard Edition - single license, software only..................... 0.500
Note: Includes GE Fanuc's InfoLink CD with electronic documentation for VersaMax and
Series 90 PLCs.
* IC646MPP101 Logic Developer - PLC Professional Edition, single license, with Programming 0.500
Cable and RS485 Mini-Converter
* IC646MPP001 Logic Developer - PLC Professional Edition, single license, software only................. 0.500
* IC646MPP005 Logic Developer - PLC Professional Edition - 5 Pack................................................. 0.500
* IC646MPP010 Logic Developer - PLC Professional Edition - 10 Pack............................................... 0.500
* IC646MPP050 Logic Developer - PLC Professional Edition - 50 Pack.............................................. 0.500
* IC646MPPS50 Logic Developer - PLC Professional Edition - 50 Seat Site License........................... 0.500
* IC646MPPS99 Logic Developer - PLC Professional Edition - Unlimited Seat Site License................ 0.500
Note: Please contact GE Fanuc or an authorized distribution partner of GE Fanuc for
quotation.
* IC646MPC101 Logic Developer - PLC Configuration Tools with Programming Cable........................ 0.500
* IC646MPSU01 Logic Developer - PLC Standard Edition, single license, Upgrade from Logicmaster 0.500
90-30 or Control. (Serial number required with valid subscription service).
Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster
Series 90-30 with valid subscription service. Please provide serial number.
* IC646MPSU11 Logic Developer - PLC Standard Edition, single license, Upgrade from VersaPro 0.500
Standard Edition, Logicmaster 90-30 or Control. (Serial number required, valid
subscription service not required)
Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster
Series 90-30. Please provide serial number.
* IC646MPPU01 Logic Developer - PLC Professional Edition, single license, Upgrade from 0.500
VersaPro Professional, Logicmaster 90-70 or Control. (Serial number required with
valid subscription service).
Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster
Series 90-70 with valid subscription service. Please provide serial number.
* IC646MPPU11 Logic Developer - PLC Professional Edition, single license, Upgrade from 0.500
VersaPro Professional Edition, Logicmaster 90-70 or Control. (Serial number
required, valid subscription service not required)
Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster
Series 90-70. Please provide serial number.
* IC646MPPU03 Logic Developer - PLC Professional Edition, single license, Upgrade from 0.500
VersaPro Standard Edition, Logicmaster 90-30. (Serial number required, with valid
subscription service)
Note: Requires a registered copy of VersaPro Standard Edition or Logicmaster Series 90-30
with valid subscription service. Please provide serial number. Limited to one copy per license.
* IC646MPPU33 Logic Developer - PLC Professional Edition, single license, Upgrade from 0.500
VersaPro Standard Edition, Logicmaster 90-30. (Serial number required, valid
subscription service not required)
Note: Requires a registered copy of VersaPro Standard Edition or Logicmaster Series 90-30.
Please provide serial number. Limited to one copy per license.
MOTION DEVELOPER
* IC800FXMODEV CIMPLICITY Motion Developer software for the S2K Series Amplifier/Controllers, 0.500
single license, software only
Note: Communication cable is not included. Add SAFE for Machine Developer to receive free
software version upgrades and unlimited calls to Technical Support Help Desk.
DEVELOPMENT SUITES
All development suites are bundled with a 1 year SAFE contract.
SAFE
Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls to
Technical Support Help Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY
Machine Edition. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on
an annual basis. The Technical Support helpdesk is available for 3 callers, additional callers support may be purchased with
part number IC648SAF000.
DEMONSTRATION CD PACKS
IC646MED010 Machine Edition Demo 10 Pack.................................................................................. 2.978
Note: Servers run on Windows NT/2000/XP operating systems on INTEL platforms. All systems include as standard Graphics,
Alarm Management, Trending, Basic Control Engine (Visual Basic scripting), System Management Utilities, ODBC Data
Logging, DDE Client, Advanced DDE Client, OPC Client and GE Fanuc PLC communications. A full I/O license is required to
run multiple CIMPLICITY projects on the same server.
Development Systems include run-time capability and system configuration capability.
For local language : please contact product marketing.
I/O Point Count - points collected from devices (PLCs/CNCs) count toward the point count - virtual points (points created
within CIMPLICITY only) are not counted, unless on a system used as an Enterprise server (Unlimited), in which case all
points are counted.
GE Fanuc communications drivers include CCM2, Genius (requires PCIM board), Series 90 TCP/IP and SNP. Hot-standby
PLC support for the 90-70 and 90-30 with TCP/IP communications is available.
For Upgrade to newer version: a SAFE contract is required to upgrade CIMPLICITY to latest release. Under SAFE contract or
warranty period, go to www.cimplicityregistration.com to order the upgrade free of charge.
Note: Runtime Systems include severall communication drivers. See "ADDITIONAL COMMUNICATION PROTOCOLS"
VIEWER NODES
IC646TDV999 HMI Development Viewer............................................................................................ 0.800
Note: A Development server is required on the network.
Note: Viewers run on Windows Me/98/NT/2000/XP operating systems on INTEL platforms.Viewer nodes are sent data by a
server or several servers. They do not directly collect data from PLCs
Development & Runtime Viewers allow an operator to create screens, set values through the server to the PLC, acknowledge
alarms, and perform project configuration on associated servers. Screens may be stored locally on the Viewer node or may be
called across the network from an associated Server.
Runtime Only Viewers allow the display of screens (stored either locally on the Viewer, or called from a Server), alarm
acknowledgement, and sending of set points to PLCs, but operators can not create additional screens nor can they use the
Viewer node to configure projects on servers.
Note: CIMPLICITY Pro Server is a bundled package including the following options and drivers: Applicom, Allen-Bradley DF1,
Allen-Bradley, Allen-Bradley RF Antenna, FloPro/FloNet, Mitsubushi TCP/IP, Johnson Controls N2, Omron Host Link,
Honeywell IPC620, Sharp TCP/IP, Omron TCP/IP, Marquee, Mitsubishi Melsec, MODBUS RTU, Modbus TCP/IP, Square D,
Smarteye, Seriplex I/O, Siemens TI, Toyopuc TCP/IP, Action Calendar, Recipe, System Sentry, SQL 1 Client User, Statistical
Process Control, Terminal Services Single User, WebView Single User, VCR
Note: CIMPLICITY Pro Server is a bundled package including the following options and drivers: Applicom, Allen-Bradley DF1,
Allen-Bradley, Allen-Bradley RF Antenna, FloPro/FloNet, Mitsubushi TCP/IP, Johnson Controls N2, Omron Host Link,
Honeywell IPC620, Sharp TCP/IP, Omron TCP/IP, Marquee, Mitsubishi Melsec, MODBUS RTU, Modbus TCP/IP, Square D,
Smarteye, Seriplex I/O, Siemens TI, Toyopuc TCP/IP, Action Calendar, Recipe, System Sentry, SQL 1 Client User, Statistical
Process Control, Terminal Services Single User, WebView Single User, VCR
Note: GE Fanuc Drivers are included with all Servers systems to include: CCM-2, Genius requires PCIM Interface, DDE
Client, Series 90 Ethernet with Redundancy support dor 90-30 & 90-70 Controllers, SNP/SNPX. Communication Drivers Free
of charge on Runtime Servers, see notes. Please call your local GEF office or distributor.
PRODUCT OPTIONS
IC646NCL000 Action Calendar........................................................................................................... 0.100
Note: Server and Viewer Option.
CIMPLICITY® SQL
* IC646NSL900 CIMPLICITY SQL 2000 Processor License................................................................. 0.014
Note: One processor license must be purchased for each processor in the server, regardless
of whether the processor is running the SQL Server software. For example, if SQL Server
2000 is installed on one (1) four (4) CPU Server, four (4) processor licenses are required
regardless of whether SQL Server 2000 is actually installed on all four (4) CPUs. Also note
that you would be required to purchase the CIMPLICITY Multi-Processor Support License as
well.
CIMPLICITY® TRACKER
Please contact GE Fanuc for quotation.
UPGRADES - FUNCTIONAL
IC646NUU000 HMI Functional Upgrade Transaction Processing Fee................................................ TBD
Note: To upgrade for example a 150 I/O Run-time Server to a 300 I/O Development Server. A
processing fee must be purchase with each license upgrade. Upgrade to Pro-Server is not
possible. Contact your sales representative to get the details on how to upgrade.
Note: With CIMPLICITY Plant Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help
Desk, free software version upgrades, all service pack product enhancements. The CIMPLICITY Plant Edition SAFE contract
covers you for a period of one full year and is renewed on an annual basis. The Technical Support helpdesk is available for 3
callers, additional callers support may be purchased with part number SA648SAF000.
This support plan covers systems at the latest software version and one major software version back. For those systems
using software greater than one major release back, please contact Product maketing. For extended support, please contact
GE Fanuc.
DEMONSTRATION CD PACKS
IC646NDP000 CIMPLICITY HMI, DEMO Ten Pack in English........................................................... 0.800
Note: Version 6.0.
AP646NPP000 SIEMENS PPI, MPI, PPI+, S7 protocols for CIMPLICITY HMI................................... 0.800
Note: 1 Profibus port for Siemens S7. Exclusively for PPI, PPI+, MPI and S7 protocols (PCI
bus). FDL S5, DP and FMS protocols are not supported on the PC1500S7 board (See
AP646NPB000 reference)
The Profibus RS485 (insulated) electrical interface is already included.
Note: The preferred communication link is OPC Client with the Applicom board. OPC Server is provided with Applicom board.
OPC Client is included in Base System. If OPC client is not used, the APPLICOM communication driver, IC646NAP000 must
be purchased as a separated option for Development Systems only.
The VersaMax Nano / VersaMax Micro PLC User's Manual (GFK-1645) and the VersaPro
User's Guide (GFK-1670) are included on the VersaPro CD Rom in Adobe Acrobat (.pdf)
format.
IC641VPS002 VersaPro Nano/Micro Edition (VersaMax Nano/Micro, Series 90 Micro), software 0.174
only
Note: Supports VersaMax Nano, VersaMax Micro and Series 90 Micro. The programming
cable for VersaMax Nano/Micro (IC200CBL500) or Series 90 Micro (IC690ACC901) are not
included.
The VersaMax Nano / VersaMax Micro PLC User's Manual (GFK-1645) and the VersaPro
User's Guide (GFK-1670) are included on the VersaPro CD Rom in Adobe Acrobat (.pdf)
format.
IC641VPS300-ADP VersaPro Standard Edition (90-30, VersaMax) with SNP Mini-Converter and 1.050
Cable - Single License
Note: Supports VersaMax Nano, VersaMax Micro and all VersaMax CPUs, the entire family
of Series 90 Micro and Series 90-30 as well as Serial (SNP) and Ethernet communication.
GE Fanuc's InfoLink CD Rom Library for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products is included (IC690CDR002).
Includes the serial programming cable and the mini-converter.
IC648VPM300 VersaPro Standard (90-30, VersaMax) - Annual Subscription Service - Single TBD
License
Note: The Subscription service provides software service packs and updates for 12 months
from the date of purchase.
IC641VPP700 VersaPro Professional Edition (90-70, 90-30, VersaMax) - Single License, 0.750
software only
Note: The serial programming cable and the mini-converter are not included.
IC641VPP705 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 5 Pack License............... TBD
Note: The serial programming cable and the mini-converter are not included. The software
requires registration for software authorization (site key).
IC641VPP710 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 10 Pack License............. 1.764
Note: The serial programming cable and the mini-converter are not included. The software
requires registration for software authorization (site key).
IC641VPP750 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 50 Pack License............. 1.764
Note: These VersaPro bundles contain multiple copies of Versapro and Infolink. To obtain the
site key please contact the European Registration center (phone: +352 727979 -298 / fax:-
351. Versapro runs with all features for 4 days without registration.The serial programming
cable and the mini-converter are not included.
* IC648VPM700 VersaPro Professional Edition (90-70, 90-30, VersaMax) Subscription Service - 1 TBD
License
Note: The Subscription service provides software service packs and updates for 12 months
from the date of purchase.
PRODUCT OPTIONS
IC641VPSCAM VersaPro Cam Editor................................................................................................... 0.174
Note: The Versapro CAM Editor enables the user to create and download CAM profiles to the
Motion Mate DSM314 Motion Controller IC693DSM314. Requires VersaPro 1.5 or greater.
DEMO PACKAGES
IC641VPD010 VersaPro Distributor Demo - 10 Pack......................................................................... 0.400
IC641VPD050 VersaPro Distributor Demo - 50 Pack......................................................................... 2.040
Note: VersaPro Demo Packages are intended to be used for customer evaluation. The VersaPro demo runs for 4 days. The
disks are packages in a cardboard envelope suitable for mail.
UPGRADE SERVICE
IC641VUG301 Upgrade from Logicmaster 90-30 or Control 90-30 to VersaPro Standard Edition 0.750
(IC641VPS300)
Note: This upgrade allows registered customers that use currently Logicmaster 90-30 or
Control 90-30 to purchase VersaPro (IC641VPS300) at a discounted rate. VersaPro allows
users of Logicmaster and Control to import their existing programs.
IC641VUG701 Upgrade from Logicmaster 90-70 Subscription Service to VersaPro Professional 1.764
Edition
Note: This upgrade allows registered customers that use currently Logicmaster 90-70 or
Control 90-70 to purchase VersaPro (IC641VPP700) at a discounted rate. VersaPro allows
users of Logicmaster and Control to import their existing programs.
IC641VUG703 Upgrade from VersaPro Standard edition to VersaPro Professional Edition............... 1.764
IC641VUG002 Upgrade Kit for VersaPro NanoMicro Edition to current revision................................ TBD
Note: Please provide proof of purchase.
IC648VPM300 VersaPro Standard (90-30, VersaMax) - Annual Subscription Service - Single TBD
License
Note: The Subscription service provides software service packs and updates for 12 months
from the date of purchase.
* IC648VPM700 VersaPro Professional Edition (90-70, 90-30, VersaMax) Subscription Service - 1 TBD
License
Note: The Subscription service provides software service packs and updates for 12 months
from the date of purchase.
Note: GE Fanuc provides a free 90-day software upgrade (subscription) service for registered VersaPro users.
DOCUMENTATION
GFK-1670 VersaPro User's Manual - English............................................................................... 0.373
GFK-1670-FR VersaPro User's Manual - French............................................................................... 0.310
Note: French translation currently covers configuration and programming of VersaMax PLC
as well as the entire Series 90-30 family - in line with VersaPro Version 1.02
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
Note: The Control User's Guide (GFK-1295) and the InfoLink CD-ROM (IC690CDR002) are included in each package. The
RS232/485 mini-converter and cable package (IC690ACC901) is not included.
The following manuals are recommended for the Control programming software:
GFK-1411 Series 90-30 System Manual
GFK-1192 Series 90-70 System Manual
Other editors are available as options. The C-Toolkit (IC641SWP709) is required to create C Program Blocks for the Series
90-30 or Series 90-70.
Note: The RS232/485 mini-converter and cable package (IC690ACC901) is not included.
ACCESSORIES
IC690ACC901 RS-232 to RS-422/485 Miniconverter with programming cable (Consists of 0.100
HE693SNPCBL and HE693XTADP)
IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141
Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable
can also be used on the CPU351/352 as well as on the Ethernet interface. When using
DSM314, this cable is only required for flash firmware upgrades.
DOCUMENTATION
GFK-1295 Control User's Guide................................................................................................... TBD
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
Note: The following manuals are recommended for the Series 90 Micro Software:
GFK-0466 Logicmaster 90, Series 90-30/20/Micro Programming Software User's Manual
GFK-0467 Series 90-30/20/Micro Programmable Controllers Reference Manual
GFKE-0001 EDOPS 2plus for Series 90 Micro Programming Software
GFK-1670 VersaPro User's Manual
Note: All IC641SWCxxx/IC640HWCxxx packages include IC690CDR002 Infolink CD-ROM documentation. All IC641SWM3xx
include IC693LBR301 library of Series 90-30 paper manuals.
Note: All IC641SWCxxx/IC640HWCxxx packages include IC690CDR002 Infolink CD-ROM documentation. All
IC641SWM7xx/IC640HWP7xx include IC697LBR701 library of Series 90-70 paper manuals.
Compatible with GMR CPUs. Requires IC690ACC901 and IC690CBL714, not included.
C TOOLKITS
IC641SWP709 C Programmer's Toolkit for Series 90 PLCs, Standard............................................... 0.655 M0802
Note: This product is a software product which is licensed to the user for use on a single PC
at a time. It can be used to create C function blocks which can be executed in any
compatible Series 90-30 or Series 90-70 PLC. Once a C block is created it can be placed in a
VersaPro / Control for Series 90-30 or Logicmaster / Control for Series 90-70 Library and
handled like any other program element.
Note: Release 5.00 of the C Programmer’s Toolkit for Series 90-70 and Series 90-30 controller supports the creation of Series
90-70 PLC CPU C blocks and standalone C programs using the Microsoft® C Compiler versions 6.0 or 7.0 or Microsoft Visual
C/C++ versions 1.0 or 1.5. The Toolkit also supports 90-30 C subroutines and C
main programs using Version 8.00C of the Microsoft C Compiler. Release 8.00C of the Microsoft C Compiler is included with
the toolkit and can be used instead of purchasing the compiler separately. Series 90-30 support is present in both PLC C
Toolkits listed above; however, the 90-30 PLC does not support the use of the C debugger; therefore, 90-30 functionality is
the same in both versions (IC641SWP709/719).
IC641SWP081 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 10....................................... 3.800 M0802
Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP
communications software and the Toolkit for Windows 95/NT C/C++ Applications
(IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-
0317) for a single machine. The IC641SWP081 product is provided as a convenience to
users requiring use of the Host software on multiple platforms.
OTHER SOFTWARE
IC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802
IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802
IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802
# IC651ENS042 Series 90-70 TCP/IP/Ethernet Software for IC697CMM741....................................... 0.733 M1102
TECHNICAL DOCUMENTATION
Weight Item
Catalog Number Description (kg) Status
TECHNICAL DOCUMENTATION
GFK-xxxx VersaMax/Series 90-30/20/Micro Manuals (per manual)............................................
GFK-yyyy Series 90-70 Manuals (per manual)............................................................................
GFS-xxx Training Manual (per manual).....................................................................................
IC693LBR301 Series 90-30 Paper Manuals Library........................................................................... 14.492
IC697LBR701 Series 90-70 Paper Manuals Library........................................................................... 14.424
PM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD
Note: This library contains the following manuals (English): B-65232EN, B-65235EN, B-
65245EN, B-65142E, B-65165E, B65150E, B-65192EN, B-65195EN, B-65162E.
IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095
Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field
Control, Operator Interfaces and motion control products. Includes one year subscription
service for free upgrades with product registration.
IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBD
Note: For registered users only.
IC690CDR003 Legacy CD Rom Library Product Information Library - Single License....................... 0.142
Note: Contains product documentation for all legacy products like Series One, Series Five
and Series Six.
IC690CDR004 InfoLink & Legacy CD Rom Library Product Information Library - Single License...... 0.142
Note: Contains two CDs (IC690CDR002 and IC690CDR003). Includes one year Infolink
subscription service for free upgrades with product registration.
T&L including local GE Fanuc per diem rates will be charged at cost +10%.