You are on page 1of 3

MORE THAN 75 YEARS

HOLDING CORPORATION OF EXPERIENCE

ELECTRIC DETONATORS

-Instantaneous electric detonators


TED-A and TED-B
-Milliseconds electric detonators
30 EUD-A and 30 EUD-B
Delay period 30 ms - number of delays 10
-Half seconds electric detonators
500 EUD-A and 500 EUD-B
Delay period 500 ms - number of delays 10

A- detonators of normal sensitivity


B- detonators with no sensitivity
Electric detonators are used for blasting on surface work and in
underground coal mines, on dry and wet grounds. They are not
to be used in air-methane and explosive coal dust environment.
The accuracy of delay times eliminates any overlap and
contributes significantly to better breakage of materials and
decrease in vibration during mining.
They have the initiating strength corresponding to the standard
detonator No. 8.
Mining and electric characteristics are in accordance with the
existing Serbian standards.
MORE THAN 75 YEARS
HOLDING CORPORATION OF EXPERIENCE

Technical data: Tip A Tip B


copper tinned with PVC isolation Ø 0,6/1,3 mm standard length
Conductors: 2 m or as per request of the buyer

Shell: Materials Cu or Al, diameter 7,3 mm max, length 55-87 m


No initiation under permanent
0,18 A 0,65 A
load up to:
Current required for assured firing: 0,35 A 0,90 A

Current of serial firing: 1 A min. 3,2 A min.

Safety impulse: 0,8 mJ/Ω 8 mJ/Ω

Firing impulse: 3 mJ/Ω 16 mJ/Ω

Resistance to static electricity


with 2 m of copper conductor 12 kV/300 pF 18 kV/500 pF
(from fuse-head to shell):

Hermetic: 0,2 MPa/6h


MORE THAN 75 YEARS
HOLDING CORPORATION OF EXPERIENCE

- Seismic instantaneous electric detonator TSED- SI


They are used for minings during for seismic measurements. The short work
off period and it's very small blasting provides accuracy in initiating the seismic
movement for the purpose of testing the structure of the ground.
Work off time < 1 ms ( electric initiation of 3A for a single detonation, 4 A for 5
piece series detonation and 4.5 A for more than 5 piece series)
Hermetic 0.5 Mpa/48 h
Other characteristics are the same as the TYPE A detonator

Marking and packing:


Each detonator shell has the number of delays impressed on it's bottom.
The conductor is of appropriate colors and appropriately marked (the sort
and the type of detonator, No. of delays).
Standard detonator packing (with 2m conductor) in the boxes of 500 pieces each,
containing all information and marking required.

Storage:
The detonators must be kept in approved warehouses, where the temperature
doesn't surpass - 5 to 35° C range, and the humidity is less than 80%. The
warehouses must be dry, clean, aired, fire - resistant and accessible only to
authorized personnel.

Guarantee:
Warranty period of correct function of electrical detonators is 12 months from
the delivery day under condition that the detonators are stored legally and used
in accordance with the regulations.

HK “KRUŠIK” a.d. , 14000 VALJEVO, REPUBLIC of SERBIA


Phone 381-14-223-121, 221-121, Marketing 381-14-226-822, Telefax 381-14-220-149
e-mail: krusikmarketing@eunet.rs, web site: www.krusik.rs

You might also like